MSDS 85350

                           MATERIAL SAFETY DATA SHEET


SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION                                  

PRODUCT NUMBER
      K1100113-

PRODUCT NAME
      KRYLON® Industrial IRON GUARD DTM Water-Based Anti-Rust Acrylic Coating,
      Gloss Black

MANUFACTURER'S NAME
      THE SHERWIN-WILLIAMS COMPANY
      KRYLON PRODUCTS GROUP
      Cleveland, OH 44115
Telephone Numbers and Websites
Product Information         (800) 247-3266             
                            www.kpg-industrial.com     
Regulatory Information      (216) 566-2902             
                            www.paintdocs.com          
Medical Emergency           (216) 566-2917             
Transportation Emergency*   (800) 424-9300             

*for Chemical Emergency ONLY (spill, leak, fire exposure or accident)           
                      

SECTION 2 - COMPOSITION/ INFORMATION ON INGREDIANTS                             
      
% by Weight  CAS Number   Ingredient            Units            Vapor Pressure
1            29911-28-2   1-(2-Butoxymethylethoxy)-propanol                     
                          ACGIH TLV             Not Available    0.06 mm        
                          OSHA PEL              Not Available                   

2            1333-86-4    Carbon Black                                          
                          ACGIH TLV             3.5 MG/M3                       
                          OSHA PEL              3.5 MG/M3           
                                                                                
      
SECTION 3 - HAZARDS IDENTIFICATION                                              
      
HMIS Codes      
Health       2*  
Flammability 0   
Reactivity   0   

ROUTES OF EXPOSURE
      INHALATION of vapor or spray mist.
      EYE or SKIN contact with the product, vapor or spray mist.
EFFECTS OF OVEREXPOSURE
        EYES:   Irritation.
        SKIN:   Prolonged or repeated exposure may cause irritation
  INHALATION:   Irritation of the upper respiratory system.
                
In a confined area vapors in high concentration may cause                
headache, nausea or dizziness.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
  Redness and itching or burning sensation may indicate eye or excessive skin
  exposure.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
  May cause allergic skin reaction in susceptible persons or skin
  sensitization.
CANCER INFORMATION
  For complete discussion of toxicology data refer to Section 11.


SECTION 4 - FIRST AID MEASURES                                                  
      
        EYES:    Flush eyes with large amounts of water for 15 minutes.  Get
                 medical attention.
        SKIN:    Wash affected area thoroughly with soap and water.
                 Remove contamination clothing and launder before re-use.
  INHALATION:    If affected, remove from exposure.  Restore breathing.  Keep   
                 warm and quiet.
   INGESTION:    Do not induce vomiting.  Get medical attention immediately.


SECTION 5 - FIRE FIGHTING MEASURES                                              
      
FLASH POINT            LEL        UEL        FLAMMABILITY CLASSIFICATION     
Not Applicable         N.A.       N.A.       Not Applicable
EXTINGUISHING MEDIA
    Carbon Dioxide, Dry Chemical, Alcohol Foam
UNUSUAL FIRE AND EXPLOSION HAZARDS
 Closed containers may explode (due to the build-up of pressure) when exposed
  to extreme heat.
 During emergency conditions overexposure to decomposition products may cause a
  health hazard.  Symptoms may not be immediately apparent.  Obtain medical
  attention
SPECIAL FIRE FIGHTING PROCEDURES
   Full protective equipment including self-contained breathing apparatus
    should be used.
   Water spray may be ineffective.  If water is used, fog nozzles are    
preferable.
   Water may be used to cool closed containers to prevent pressure build-up and
    possible autoignition or explosion when exposed to extreme heat.


SECTION 6 - ACCIDENTAL RELEASE MEASURES                                         

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
    - Remove all sources of ignition.  Ventilate the area.
    - Remove with inert absorbent.


SECTION 7 - HANDLING AND STORAGE                                                
      
STORAGE CATEGORY
 Not Applicable.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE
 Keep container closed when not in use.  Transfer only to approved containers
 with complete and appropriate labeling.  Do not take internally.  Keep out of
 the reach of children.


SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION                               
      
PRECAUTIONS TO BE TAKEN IN USE
 Use only with adequate ventilation.
 Avoid contact with skin and eyes.  Avoid breathing vapor and spray mist.
 Wash hands after using.
 This coating may contain materials classified as nuisance particulates (listed
 "as Dust" in Section 2) which may be present at hazardous levels only during
 sanding or abrading of the dried film.  If no specific dusts are listed in
 Section 2, the applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3
 (total dust), 3 mg/m3 (respirable fraction), OSHA PEL 15 mg/m3 (total dust), 5
 mg/m3 (respirable fraction).
VENTILATION
 Local exhaust preferable.  General exhaust acceptable if the exposure to
 materials in Section 2 is maintained below applicable exposure limits.  Refer
 to OSHA Standards 1910.94, 1910.107, 1910.108.
RESPIRATORY PROTECTION
 If personal exposure cannot be controlled below applicable limits by
 ventilation, wear a properly fitted organic vapor/particulate respirator
 approved by NIOSH/MSHA for protection against materials in Section 2.
 When sanding or abrading the dried film, wear a dust/mist respirator approved
 by NIOSH/MSHA for dust which may be generated from this product, underlying
 paint, or the abrasive.
PROTECTIVE GLOVES
 Wear gloves which are recommended by glove supplier for protection against
 materials in Section 2.
EYE PROTECTION
 Wear safety spectacles with unperforated sideshields.


SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES                                    
      
PRODUCT WEIGHT               8.60 lb/gal          1030 g/l                      
SPECIFIC GRAVITY             1.04                                               
BOILING POINT                212 - 449 F          100 - 231 C                   
MELTING POINT                Not Available                                      
VOLATILE VOLUME              66%                                                
EVAPORATION RATE             Slower than ether                                  
VAPOR DENSITY                Heavier than air                                   
SOLUBILITY IN WATER          N.A.                                               
pH                           9.0                                                
      
VOLATILE ORGANIC COMPOUNDS (VOC Theoretical - As Packaged)                      
0.761 lb/gal           91g/l          Less Water and Federally Exempt Solvents
0.28 lb/gal            33g/l          Emitted VOC                          


SECTION 10 - STABILITY AND REACTIVITY                                           
      
STABILITY - Stable
CONDITIONS TO AVOID
 None known.
INCOMPATIBILITY
 None known.
HAZARDOUS DECOMPOSITION PRODUCTS
 By fire: Carbon Dioxide, Carbon Monoxide
HAZARDOUS POLYMERIZATION
 Will not occur.


SECTION 11 - TOXICOLOGICAL INFORMATION                                          
      
CHRONIC HEALTH HAZARDS
 Carbon Black is classified by IARC as possibly carcinogenic to humans (group
 2B) based on experimental animal data, however, there is insufficient evidence
 in humans for its carcinogenicity.
TOXICOLOGY DATA
CAS No.          Ingredient Name                                                
29911-28-2       1-(2-Butoxymethylethoxy)-propanol                              
                                 LC50 RAT         4HR              Not Available
                                 LD50 RAT                          Not Available
  
1333-86-4        Carbon Black                                                   
                                 LC50 RAT         4HR              Not Available
                                 LD50 RAT                          Not Available
  

SECTION 12 - ECOLOGICAL INFORMATION                                             

ECOTOXICOLOGICAL INFORMATION
 No data available.


SECTION 13 - DISPOSAL CONSIDERATIONS                                            
      
WASTE DISPOSAL METHOD
 Waste from this product is not hazardous as defined under the Resource
 Conservation and Recovery Act (RCRA) 40 CFR 261.
 Incinerate in approved facility.  Do not incinerate closed container.  Dispose
 of in accordance with Federal, State/Provincial, and Local regulations
 regarding pollution.


SECTION 14 - TRANSPORT INFORMATION                                              
      
US Ground (DOT)
 Not Regulated for Transportation.
Canada (TDG)
 Not Regulated for Transportation.
IMO
 Not Regulated for Transportation.


SECTION 15 - REGULATORY INFORMATION                                             
      
SARA 313 (40 CFR 372.65C) SUPPLIER NOTIFICATION
CAS No.               CHEMICAL/COMPOUND              % BY wt      % Element     
   No ingredients in this product are subject to SARA 313 (40CFR 372.65C)
   Supplier Notification.
CALIFORNIA PROPOSITION 65
 WARNING: This product contains chemicals known to the State of California to
 cause cancer and birth defects or other reproductive harm.
TSCA CERTIFICATION
 All Chemicals in this product are listed, or are exempt for listing, on the
 TSCA Inventory.


SECTION 16 - OTHER INFORMATION                                                  
      
This product has been classified in accordance with the hazard criteria of the
Canadian Controlled Products Regulations (CPR) and the MSDS contains all of the
information required by the CPR.



The above information pertains to this product as currently formulated, and is
based on the information available at this time.  Addition of reducers or other
additives to this product may substantially alter the composition and hazards
of the product.  Since conditions of use are outside our control, we make no
warranties, express or implied, and assume no liability in connection with any
use of this information.

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2010 Imperial Supplies LLC Questions or comments? Contact us.