![]() |
![]() |
![]() |
|
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 85132 -- [Back] | |||
|
MSDS 85132 85132: Gloss Black Enamel 1 Gal [4]MSDS Last updated: 08/02/2004
MATERIAL SAFETY DATA SHEET
acc. To ISO/DIS 11014
Printing date 08/02/2004 Reviewed on 08/02/2004
1. IDENTIFICATION OF SUBSTANCE
Trade name: MRO GLOSS BLACK GALLONS
Product code; 0000011415F
Manufacturer/Supplier: SEYMOUR OF SYCAMORE
1917 Crosby Avenue
Sycamore, IL. 60178
(815)-895-9101, www.seymourpaint.com
Information department: Health & Safety Department
Emergency information: CHEMTEL 1-800-255-3924, 813-248-0585 if located
outside the U.S.
2. COMPOSITION/DATA ON COMPONENTS
Chemical Description; This product is a mixture of the substances listed below
with nonhazazardous additions.
Dangerous components:
--------------------------------------------------------------------------------
64742-47-8 Mineral spirits Xn, F: R 11-65 50.13%
1333-86-4 Carbon black Xi: R 36/37/38 1.6%
1332-58-7 Aluminum Silicate Xi: R 36/37 1.28%
Additional Information: For the wording of the listed risk phrases refer to
Section 3.
3. HAZARDS IDENTIFICATION
Hazard description: Xn Harmful
F Highly flammable
Physical and
Environmental dangers: R 11 Highly flammable
R 65 Harmful: may cause lung damage if swallowed.
NFPA ratings (scale 0 - 4): Health - 2
Flammability - 3
Reactivity - 0
HMIS-ratings (scale 0 - 4): Health - 2
Flammability - 3
Physical Hazard - 0
4. FIRST AID MEASURES
After inhalation: Supply fresh air: consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: Consult a doctor if symptoms persist.
5. FIRE FIGHTING MEASURES
Extinguishing agents: CO2, sand, extinguishing powder, or water spray. Fight
larger fires with water spray or alcohol resistant foam.
Protective equipment: No special measures required.
6. ACCIDENTAL RELEASE MEASURES
Personal safety
Precautions: Wear protective equipment. Keep unprotected persons away.
Environmental safety
Precautions: Do not allow product to reach sewage systems or ground water.
Prevent seepage into sewage system, work pits and cellars.
Inform appropriate authorities in case of seepage into water
course or sewage system.
Measures for cleaning/
Collecting; Absorb with liquid-binding material (sand, diatomite, acid binders,
universal binders, sawdust). Do not flush with water or aqueous
cleansing agents. Use diluted caustic solution. Soak up spills with
inert absorbent material. Refer to Section 13 for disposal
information.
7. HANDLING AND STORAGE
Safe handling
Information: Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Fire/explosion protection; Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage requirements; Keep away from sources of heat and direct sunlight.
Do not warehouse in subfreezing conditions.
Further information about
Storage conditions: None.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION;
Components with limit values that require monitoring at the workplace:
64742-47-8 Mineral Spirits
TLV 200 mg/m3
As total hydrocarbon vapor: Skin: (P)
1333-86-4 Carbon black
PEL 3.5 mg/m3
REL 3.5 *mg/m3
*0.1 in presence of PAHs, as PAHs: 10-hr TWA
TLV 3.5 mg/m3
1332-58-7 Aluminum Silicate
PEL 15*:5*mg/m3
*Total dust**Respirable fraction
REL 10*:5**mg/m3
*Total dust**Respirable fraction
TLV 2 R mg/m3
(e)
Protective hygienic
Measures: Keep away from foodstuffs, beverages, and animal feed.
Wash hands before breaks and at the end of work.
Breathing
Equipment: A respirator is generally not necessary when using this product
outdoors or in large open areas. In cases of inadequate ventilation,
a respiratory protective device should be worn to prevent
overexposure.
Protection of
Hands: Protective gloves. The glove material has to be impermeable and
resistant to the substance. No glove recommendation can be given.
Eye protection; tightly sealed goggles.
9. PHYSICAL AND CHEMICAL PROPERTIES:
General Information:
Form: Liquid
Color: According to trade name description in Section 1.
Odor: Solvent
Boiling point/
Boiling range; 100°C (212°F)
Flash point: 4°C (39°F)
Ignition temperature; 210.0°C (410°F)
Auto igniting: Product is not self-igniting.
Danger of explosion: Heating may cause an explosion.
In use, may form flammable/explosive vapor-air mixture.
Lower Explosion Limit: 0.5 Vol %
Upper Explosion Limit: 6.5 Vol %
Density: Not determined.
VOC content: 0.50 kg/l / 4.18 lb/gl
VOC in weight percent (less acetone): 50.1 %
Solids content; 49.9 %
10. STABILITY AND REACTIVITY:
Conditions to be avoided: No decomposition if used according to specifications.
Possibility of Hazardous
Reactions: No dangerous reactions known.
11. TOXICOLOGICAL INFORMATION;
Primary effect on the skin: No irritant effect.
Primary effect on the eye: No irritating effect.
Sensitization: No sensitizing effects known.
12. ECOLOGICAL INFORMATION
Other Information: This product does not contain any chlorinated solvents or
lead. No specific ecological data is available for this product.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of in accordance with local, state, and federal
regulations. Do not puncture, incinerate, or compact. Partially empty cans
cannot be disposed of with regular trash. Do not heat or cut empty containers
with electric or gas torches.
Recommendation: Empty cans should be recycled.
14. TRANSPORT INFORMATION;
Hazard Class: 3
Label: Consumer Commodity
ADR/RID Class: ORM-D
UN-Number; 1263
IMDG Class; 3
Packing group: III
EMS Number: F-E,S-E
Marine Pollutant; No
ICAO/IATA Class: 3
Proper shipping name: PAINT
15. REGULATIONS
SARA Section 355 (extremely hazardous substances):
None of the ingredients in this product are listed.
SARA Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act):
64742-47-8 Mineral Spirits
1333-86-4 Carbon black
1332-58-7 Aluminum Silicate
PROPOSITION 65 Chemicals known to cause cancer:
None of the ingredients in this product are listed.
PROPOSITION 65 Chemicals known to cause reproductive toxicity:
None of the ingredients in this product are listed.
Canadian WHMIS; This product has been classified according to the Controlled
Product Regulations and the MSDS contains all the necessary information
required by the CPR.
Class B, Division D2---FLAMMABLE LIQUIDS
EPA; A=Known human carcinogen
B=Probable human carcinogen
C=Possible human carcinogen
D=Not classifiable as to human carcinogenicity: Inadequate
human and animal evidence of carcinogenicity (or no data is
available).
A=Known human carcinogen
B=Probable human carcinogen
C=possible human carcinogen
D=Not classifiable as to human carcinogeniciyt: Inadequate human and animal
evidence of carcinogenicity ( or no data is available).
IARC: Group 2B; The ingredient is possible carcinogenic to humans. There is
limited evidence of carcinogenicity.
Group 3: The ingredient is unclassifiable as to its carcinogenicity to
humans.
1333-86-4 Carbon black 2B
ACGIH TLV's: A1-designates a confirmed human carcinogen.
A2-designates a suspected human carcinogen.
A3-designates an animal carcinogen.
A4-designates 'not classifiable as a human carcinogen".
1333-86-4 Carbon black A4
1332-58-7 Aluminum Silicate A4
NIOSH:
1333-86-4 Carbon black
16. OTHER INFORMATION:
This information is based on our present knowledge. However, this shall not
constitute a guarantee for any specific product features and shall not establish
a legally valid contractual relationship.
Contact: Craig Swafford
Regulatory Affairs
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |