MSDS 85117

                    MATERIAL SAFETY DATA SHEET

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:                ARGENT GRAY         DATE PRINTED: 10/05/07
IDENTIFICATION NUMBER:       85117
PRODUCT USE/CLASS

     SUPPLIER:                          MANUFACTURER:
  IMPERIAL SUPPLIES LLC              IMPERIAL SUPPLIES LLC
  789 ARMED FORCES DRIVE             789 ARMED FORCES DRIVE
  GREEN BAY, WI. 54304               GREEN BAY, WI. 54304

  INFORMATION #: 800-558-2808             INFORMATION #: 800-558-2808
  EMERGENCY #: 800-255-3924  CHEM-TEL     EMERGENCY #: 800-255-3924 CHEM-TEL

PREPARER:  RICH,   PHONE:  PREPARE DATE: 10/05/07

SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS

                                                    WT/WT %
ITEM        CHEMICAL NAME          CAS NUMBER       EQUAL TO

01          Acetone                00067-64-1       37.30 %
02          Toluol                 00108-88-3       25.00 %
03          Propane                00074-98-6       15.80 %
04          N-Butane               00106-97-8        9.30 %
05          Aluminum Flake         07429-90-5        1.70 %
06          Glycol Ether EP        02807-30-9        1.40 %

                              EXPOSURE LIMITS
              ACGIH                  OSHA                COMPANY
ITEM   TLV-TWA    TLV-STEL    PEL-TWA    PEL-CEILING      TLV-TWA    SKIN

01     500 ppm    750 ppm     750 ppm    1000 ppm          N.E.       YES
02     50  ppm    N.E.        100 ppm    150  ppm          N.E.       YES
03    1000 ppm    N.E.        1000 ppm   N.E.              N.E.       NO
04     800 ppm    N.E.         800 ppm   N.E.              N.E.       NO
05    10 mg/m3    N.E.        15 mg/m3   N.E.              N.E.       NO
06      25 ppm    N.E.         25 ppm    N.E.              N.E.       YES

(See Section 16 for abbreviation legend)

SECTION 3 - HAZARDS IDENTIFICATION

*** EMERGENCY OVERVIEW ***   Contents under pressure!   Avoid temperatures
over 120 F.

EFFECTS OF OVEREXPOSURE:  EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can cause pain, tearing, reddening and swelling
accompanied by a stinging sensation and/or a feeling like that of fine dust in
the eyes.

EFFECTS OF OVEREXPOSURE:  SKIN CONTACT:  Causes skin irritation. Allergic
reactions are possible. Prolonged or repeated contact can result in defatting
and drying of the skin which may result in skin irritation and dermatitis
(rash).

EFFECTS OF OVEREXPOSURE: INHALATION:  Headaches, dizziness, nausea, decreased
blood pressure, changes in heart rate and cyanosis may result from over-
exposure to vapor or skin exposure. Prolonged inhalation may be harmful.

EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal if
swallowed. Irritating to mouth, throat and stomach.

EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Possible reproductive hazard.

PRIMARY ROUTE(S) OF ENTRY: SKIN ABSORPTION    INHALATION    INGESTION   
                           EYE CONTACT  SKIN CONTACT

SECTION 4 - FIRST AID MEASURES

FIRST AID - EYE CONTACT:  Immediately flush eyes with plenty of water. Get
medical attention, if irritation persists.

FIRST AID - SKIN CONTACT:  Wash with soap and water. Get medical attention if
irritation develops or persists. Remove contaminated clothing. Wash skin with
soap and water. Get medical attention if irritation develops or persists.

FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get immediate medical
attention.

FIRST AID - INGESTION: If swallowed, do NOT induce vomiting. Give victim a
glass of water or milk. Call a physician or poison control center immediately.
Never give anything by mouth to an unconscious person. If swallowed, induce
vomiting immediately as directed by medical personnel.
Never give anything by mouth to an unconscious person. Get medical attention
immediately.

SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT:   -4F           LOWER EXPLOSIVE LIMIT:  1.0 %
(PENSKY-MARTENS C.C.)        UPPER EXPLOSVIE LIMIT: 12.8 %

AUTO IGNITION TEMPERATURE:

EXTINGUISHING MEDIA:   WATER FOG  DRY CHEMICAL  CO2  ALCOHOL  FOAM  FOAM

UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors may form explosive mixture with air.
Flammability classification, as defined by 29 CFR 1910.1200:   Flammable

SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if exposed to
heat (fire). As in any fire, wear self-contained breathing apparatus
pressure-demand (MSHA-NIOSH Approved or equivalent) and full protective gear.

SECTION 6 - ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill with
inert material (e.g. dry sand or earth), then place in a chemical waste
container.

SECTION 7 - HANDLING AND STORAGE
HANDLING: Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing vapors or mist. Avoid contact with eyes, skin, and clothing.

STORAGE: Keep away from heat, sparks and flame. Contents under pressure. Do not
store above 120F.

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any
air contaminants to within their TLVs during the use of this product.

RESPIRATORY PROTECTION:  A NIOSH/MSHA approved air purifying respirator with an
organic vapor cartridge or canister may be permissible under certain
circumstances where airborne concentrations are expected to exceed exposure
limits. Protection provided by air purifying respirators is limited. Use a
positive pressure air supplied respirator if there is any potential for an
uncontrolled release, exposure levels are not known, or any other circumstances
where air purifying respirators may not provide adequate protection.

SKIN PROTECTION: Skin contact should  be minimized. Rubber or neoprene gloves
should be worn for prolonged or repeated contact.

EYE PROTECTION: Wear safety glasses with side shields (or goggles) and a face
shield.

OTHER PROTECTIVE EQUIPMENT: Where splashing is possible, full chemically
resistant protective clothing (e.g. acid suit) and boots are required.

HYGIENIC PRACTICES:  No Information.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
BOILING RANGE:  -44 - 308 F    VAPOR DENSITY:  Is heavier than air
ODOR:                          ODOR THRESHOLD:
APPEARANCE:                    EVAPORATION RATE: Is faster than Ether
SOLUBILITY IN H2O:
FREEZE POINT:                  SPECIFIC GRAVITY: 0.7488
VAPOR PRESSURE:                Ph @ 0.0 %:
PHYSICAL STATE:                VISCOSITY:
COEFFICIENT OF WATER/OIL DISTRIBUTION:

(See Section 16 for abbreviation legend)

SECTION 10 - STABILITY AND REACTIVITY
CONDITIONS TO AVOID: Do not store above 120 deg. F. Keep away from sparks,
pilot lights, and/or open flames.

INCOMPATIBILITY: No Information.

HAZARDOUS DECOMPOSITION PRODUCTS: May produce hazardous fumes when heated to
decomposition. Fumes may contain carbon dioxide and/or carbon monoxide.

HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.

STABILITY: This product is stable under normal storage conditions.

SECTION 11 - TOXICOLOGICAL PROPERTIES

SECTION 12 - ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: This product does not contain chlorinated solvents  or
lead. No specific ecological data is available for this product. Please refer to
section 6 for information regarding accidental releases and section 15 for
regulatory reporting.

SECTION 13 - DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of in accordance with local, state, and federal
regulations. Do not puncture, incinerate, or compact. Empty containers must be
handled with care due to  product residue.  Do not heat or cut empty containers
with electric or gas torches.

SECTION 14 - TRANSPORTATION INFORMATION
DOT PROPER SHIPPING NAME: Consumer Commodity  ORM-D

DOT TECHNICAL NAME:  None

DOT HAZARD CLASS: None       HAZARD SUBCLASS: None

DOT UN/NA NUMBER: None PACKING GROUP: None      RESP. GUIDE PAGE: None

SECTION 15 - REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS FOLLOWS -

OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)

CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:

IMMEDIATE HEALTH HAZARD      CHRONIC HEALTH HAZARD       FIRE HAZARD
PRESSURIZED GAS HAZARD

SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:

CHEMICAL NAME                  CAS NUMBER         WT/WT %
Toluol                         00108-88-3         25.00 %
Glycol Ether EP                02807-30-9          1.40 %
Xylene                         01330-20-7          0.01 %
Ethyl Benzene                  00100-41-4          0.01 %
Methanol                       00067-56-1          0.01 %

U.S. STATE REGULATIONS:  AS FOLLOWS -

NEW JERSEY RIGHT-TO-KNOW
The following materials are non-hazardous, but are among the top five
components in this product:

CHEMICAL NAME           CAS NUMBER
Acrylic Resin           28262-63-7

CHEMICAL NAME           CAS NUMBER
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at greater
than 3 %.

CHEMICAL NAME           CAS NUMBER
Acrylic Resin           28262-63-7

CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are known
to the state of California to cause cancer or birth defects and other
reproductive harm:

CHEMICAL NAME           CAS NUMBER
Toluol                  00108-88-3

INTERNATIONAL REGULATIONS: AS FOLLOWS -

CANADIAN WHMIS:  This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.

CANADIAN WHMIS CLASS:  No information available.

SECTION 16 - OTHER INFORMATION

HMIS RATINGS -     HEALTH: 1 FLAMMABILITY: 4  REACTIVITY: 3

PREVIOUS MSDS REVISION DATE:  10/05/07

LEGEND:  N.A. - Not Applicable,  N.E. - Not Established,   
         N.D. - Not Determined

This product was manufactured to conform to the USDA Food Safety and Inspection
Service performance standards. These standards include, but are not limited to
the ability of this product to be safe for use in official meat and poultry
establishments, and to perform well under a daily regimen of thorough cleaning,
cyclical temperature change, and wet conditions. The dried film of this product
will neither adulterate food product nor create unsanitary conditions if used
according to directions.


The information contained on this MSDS has been checked and should be accurate.
However, it is the responsibility of the user to comply with all Federal,
State, and Local laws and regulations.

< END OF MSDS >

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.