LOGIN
Login E-mail:
Password:

Apply for an account! »
Product Search
Bottom
 

MSDS 85014

85014: Ecosafe Jct Orange 16 Oz [6]
MSDS Last updated: 06/09/2003
                            MATERIAL SAFETY DATA SHEET


            SECTION 1 --  CHEMICAL PRODUCT AND COMPANY IDENTIFICATION


PRODUCT  NAME;           JCT  YELLOW
IDENTIFICATION NUMBER;     0006201450
DATE PRINTED;     04/30/03
PRODUCT USE / CLASS:
#85514

MANUFACTURER:
Imperial Supplies LLC
789 Packer Dr
Green Bay, WI 54307

INFORMATION NUMBER: 800-558-2808
EMERGENCY TELEPHONE: 800-255-3924 (Chem-Tel)       

PREPARER:  L. Somerville,                      PREPARE DATE;  04/30/03


              SECTION 2  -  COMPOSITION / INFORMATION ON INGREDIENTS

                  
                                                  WT / WT  %
ITEM  CHEMICAL NAME               CAS NUMBER      LESS THAN
--------------------------------------------------------------------------------
01    Acetone                    00067-64-1       20.0  %
02    Propane                    00074-98-6       20.0  %
03    N-Butane                   00106-97-8       10.0  %
04    Barium Sulfate             07727-43-7       10.0  %
05    Glycol Ether EP            02807-30-9       10.0  %
06    Methyl  Iso-butyl  Ketone  00108-10-1       5.0  %
07    PM  Acetate                00108-65-6       5.0  %
08    Methyl  Propyl  Ketone     00107-87-9       5.0  %
09    Xylene                     01330-20-7       5.0  %
10    Isobutyl  Acetate          00110-19-0       5.0  %

        EXPOSURE LIMITS

                ACGIH       OSHA                   COMPANY
ITEM TLV-TWA    TLV-STEL  PEL-TWA   PEL-CEILING    TLV-TWA       SKIN
--------------------------------------------------------------------------------
01  500  ppm    750  ppm  750  ppm  1000  ppm     N.E.           YES
02  1000 ppm    N.E.      1000 ppm  N.E.          N.E.           NO
03  800  ppm    N.E.      800  ppm  N.E.          N.E.           NO
04  N.E.        N.E.      N.E.      N.E.          N.E.           NO
05  25  ppm     N.E.      25  ppm   N.E.          N.E.           YES
06  50  ppm     75  ppm   50  ppm   75  ppm       N.E.           YES
07  N.E.        N.E.      N.E.      N.E.          N.E.           NO
08  200  ppm    250  ppm  200  ppm  250  ppm      N.E.           NO
09  100  ppm    150  ppm  100  ppm  150  ppm      N.E.           YES
10  150  ppm    N.E.      150  ppm  N.E.          N.E.           YES

(See Section 16 for abbreviation legend)

  
                       SECTION 3 --  HAZARDS IDENTIFICATION


  *** EMERGENCY OVERVIEW ***:  Contents under pressure! Avoid temperatures
  over 120F.

EFFECTS OF OVEREXPOSURE -  EYE CONTACT:  Liquid, aerosols and vapors of this 
product are irritating and can cause pain, tearing, reddening and swelling 
accompanied by a stinging sensation and/or a feeling like that of fine dust in 
the eyes.

EFFECTS OF OVEREXPOSURE -  SKIN CONTACT:  Causes skin irritation.  Allergic 
reactions are possible.  Prolonged or repeated contact can result in defatting 
and drying of the skin which may result in skin irritation and dermatitis  
(rash).

EFFECTS OF OVEREXPOSURE -  INHALATION:  Headaches, dizziness, nausea, decreased 
blood pressure, changes in heart rate and cyanosis may result from over-exposure 
to vapor or skin exposure.  Prolonged inhalation may be harmful.

EFFECTS OF OVEREXPOSURE -  INGESTION;  This material may be harmful or fatal if 
swallowed. Irritating to mouth, throat and stomach. 

EFFECTS OF OVEREXPOSURE -  CHRONIC HAZARDS:  Possible reproductive hazard. 

PRIMARY ROUTE (s) OF ENTRY:  SKIN CONTACT -    SKIN ABSORPTION -   INHALATION 
INGESTION -  EYE CONTACT


                         SECTION 4 --  FIRST AID MEASURES


FIRST AID  -  EYE CONTACT:  Immediately flush eyes with plenty of water.  Get 
medical attention, if irritation persists. 

FIRST AID  -  SKIN CONTACT:  Wash with soap and water.  Get medical attention if 
irritation develops or persists.  Remove contaminated clothing.  Wash skin with 
soap and water.  Get medical attention if irritation develops or persists. 

FIRST AID  -  INHALATION:  Remove to fresh air.  If not breathing, give 
artificial respiration.  If breathing is difficult, give oxygen.  Get immediate 
medical attention.

FIRST AID - INGESTION:  If swallowed, do NOT induce vomiting.  Give victim a 
glass of water or milk.  Call a physician or poison control center immediately.  
Never give anything by mouth to an unconscious person.  If swallowed, induce 
vomiting immediately as directed by medical personnel.  Never give anything by 
mouth to an unconscious person.  Get medical attention immediately.


                       SECTION 5 --  FIRE FIGHTING MEASURES


FLASH POINT:  -4  F       LOWER EXPLOSIVE LIMIT:  1.0   %
            UPPER EXPLOSIVE LIMIT:    12.8 %

AUTOIGNITION TEMPERATURE:

EXTINGUISHING MEDIA; ALCOHOL  FOAM  CO2  DRY  CHEMICAL  FOAM  WATER  FOG

UNUSUAL FIRE AND EXPLOSION HAZARDS:  Vapors may form explosive mixture with air. 
 Flammability classification, as defined by 29  CFR 1910.1200;  Flammable

SPECIAL FIREFIGHTING PROCEDURES;  Containers can build up pressure if exposed to 
heat  (fire).  As in any fire, wear self-contained breathing  apparatus 
pressure-demand  (MSHA/NIOSH  approved or equivalent)  and full protective gear. 
 


                    SECTION 6  -  ACCIDENTAL RELEASE MEASURES


STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:  Absorb spill with 
inert material  (e.g. dry sand or earth), then place in a chemical waste 
container. 


                        SECTION 7 --  HANDLING AND STORAGE


HANDLING:  Wash thoroughly after handling.  Use with adequate ventilation.  
Avoid breathing vapors or mist.  Avoid contact with eyes, skin, and clothing.

STORAGE;  Keep away from heat, sparks and flame.  Contents under pressure. Do 
not store above 120F.


              SECTION 8  --  EXPOSURE CONTROLS / PERSONAL PROTECTION


ENGINEERING CONTROLS:  Local exhaust ventilation may be necessary to control any 
air contaminants to within their TLVs during the use of this product.

RESPIRATORY PROTECTION;  A NIOSH/MSHA  approved air purifying respirator with an 
organic vapor cartridge or canister may be permissible under certain 
circumstances where airborne concentrations are expected to exceed exposure 
limits.  Protection provided by air purifying respirators is limited.  Use a 
positive pressure air supplied respirator if there is any potential for an 
uncontrolled release, exposure levels are not known, or any other circumstances 
where air purifying respirators may not provide adequate protection. 

SKIN PROTECTION;  Skin contact should be minimized.  Rubber or neoprene gloves 
should be worn for prolonged or repeated contact. 

EYE PROTECTION;  Wear safety glasses with side shields (or goggles) and a face 
shield. 

OTHER PROTECTIVE EQUIPMENT;  Where splashing is possible, full chemically 
resistant protective clothing  (e.g. acid suit)  and boots are required.

HYGIENIC PRACTICES;  No Information.


                  SECTION 9 -  PHYSICAL AND CHEMICAL PROPERTIES


BOILING RANGE:  -44 - 308  F          VAPOR DENSITY;          Is heavier than 
air
ODOR:                           Aromatic                  ODOR THRESHOLD:
APPEARANCE;            Liquid                      EVAPORATION RATE:  Is faster 
than Ether
SOLUBILITY IN H2O;  Slight
FREEZE POINT:             SPECIFIC GRAVITY:      0.8295
VAPOR PRESSURE:                     pH: @ 0.0 %:
PHYSICAL STATE:                                     VISCOSITY:
COEFFICIENT OF WATER/OIL DISTRIBUTION:

   (See Section 16 for abbreviation legend)


                      SECTION 10 -  STABILITY AND REACTIVITY


CONDITIONS TO AVOID:  Do not store above 120 deg. F.  Keep away from sparks, 
pilot lights, and/or open flames. 

INCOMPATIBILITY:  No Information.

HAZARDOUS DECOMPOSITION PRODUCTS:  May produce hazardous fumes when heated to 
decomposition.  Fumes may contain carbon dioxide and/or carbon monoxide. 

HAZARDOUS POLYMERIZATION:  Will not occur under normal conditions. 

STABILITY:  This product is stable under normal storage conditions.


                      SECTION 11 -  TOXICOLOGICAL PROPERTIES



                       SECTION 12 -  ECOLOGICAL INFORMATION


ECOLOGICAL INFORMATION:  This product does not contain chlorinated solvents or 
lead. No specific ecological data is available for this product. Please refer to 
section 6 for information regarding accidental releases and section 15 for 
regulatory reporting. 


                      SECTION 13  -  DISPOSAL CONSIDERATIONS


DISPOSAL METHOD:  Dispose of in accordance with local, state, and federal 
regulations.  Do not puncture, incinerate, or compact.  Empty containers must be 
handled with care due to product residue.  Do not heat or cut empty containers 
with electric or gas torches.


                    SECTION 14  -  TRANSPORTATION INFORMATION


DOT PROPER SHIPPING NAME:  Consumer Commodity ORM-D

DOT TECHNICAL NAME:  None

DOT HAZARD CLASS;  None     HAZARD SUBCLASS;  None

DOT UN/NA NUMBER; None      PACKING GROUP; None    RESP.GUIDE PAGE: None


                       SECTION 15 -  REGULATORY INFORMATION


U.S. FEDERAL REGULATIONS;  AS FOLLOWS -

OSHA;  Hazardous by definition of Hazard Communication Standard  (29 CFR 19.10. 
1200)

CERCLA - SARA HAZARD CATEGORY: 
This product has been reviewed according to the EPA "Hazard Categories" 
promulgated under Sections 311 and 312 of the Superfund Amendment and 
Reauthorization Act of 1986 (SARA Title 111) and is considered, under applicable 
definitions, to meet the following categories:

IMMEDIATE HEALTH HAZARD    CHRONIC HEALTH HAZARD     FIRE HAZARD
PRESSURIZED GAS HAZARD

SARA SECTION 313;
This product contains the following substances subject to the reporting 
requirements of Section 313 of Title 111 of the Superfund Amendments and 
Reauthorization Act of 1986 and 40 CFR Part 372:

  CHEMICAL NAME            CAS NUMBER              WT/WT%  IS  LESS  THAN
--------------------------------------------------------------------------------
  Glycol Ether EP          02807-30-9              10.0  %
  Methyl  Iso-butyl Ketone 00108-10-1              5.0  %
  Xylene                   01330-20-7              5.0  %
  Ethyl  Benzene           00100-41-4              1.0  %
  Methanol                 00067-56-1              0.1  %

U.S.  STATE REGULATIONS;   AS FOLLOWS  -

  CHEMICAL  NAME        CAS   NUMBER

NEW JERSEY RIGHT-TO-KNOW;
The following materials are non-hazardous, but are among the top five components 
in this product: 

  CHEMICAL  NAME        CAS  NUMBER
Soya  Alkyd  Resin          NA

PENNSYLVANIA RIGHT-TO-KNOW;
The following non-hazardous ingredients are present in the product at greater 
than 3%:

  CHEMICAL NAME       CAS  NUMBER
Soya Alkyd Resin          NA
Acrylic Resin           NA
Novaperm Yellow Pigment       82199-12-0

CALIFORNIA PROPOSITION 65:
WARNING;  The chemical (s) noted below and contained in this product, are known 
to the state of California to cause cancer or birth defects and other 
reproductive harm:

  CHEMICAL  NAME        CAS  NUMBER
  SC-150 Solvent        64742-94-5

INTERNATIONAL REGULATIONS;  AS FOLLOWS -

CANADIAN WHMIS;  This MSDS has been prepared in compliance with Controlled 
Product Regulations except for use of the 16 headings.

CANADIAN WHMIS CLASS;  No information available. 


                         SECTION 16 -  OTHER INFORMATION


HMIS RATINGS -     HEALTH; 1       FLAMMABILITY;  4       REACTIVITY;  3

PREVIOUS MSDS REVISION DATE;  04/09/03

VOLATILE ORGANIC COMPOUNDS  (VOCS);    4.07 lbs/gal,        488 grams/ltr, 
47  % by weight

LEGEND:    N.A. - Not Applicable,            N.E. - Not Established,        
N.D.- Not Determined

The information contained on this MSDS has been checked and should be accurate.  
however, it is the responsibility of the user to comply with all Federal, State, 
and Local laws and regulations.

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

For more product information by email, click here

Imperial Supplies LLC does not provide services and products outside the United States

credit card logos