![]() |
![]() |
![]() |
|
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 85013 -- [Back] | |||
|
MSDS 85013 85007: Allied Green 20 Oz [6]85013: Bumper Chrome Bright 16 Oz Can [6] MSDS Last updated: 10/05/2007
MATERIAL SAFETY DATA SHEET
acc. to ISO/DIS 11014
Printing date 07/16/2004 Reviewed on 04/19/2004
1. IDENTIFICATION OF SUBSTANCE
Trade name: BUMPER CHROME BRIGHT
Product code: 85013
Manufacturer/Supplier: IMPERIAL SUPPLIES LLC
789 Packer Drive
Green Bay, WI 54304
Information #: 800-558-2808
Emergency #; 800-255-3924 Chem-Tel
Information department; Health & Safety Department
Emergency information: CHEMTEL 1-800-255-3924, 813-248-0585 if located
outside the U.S.
2. COMPOSITION/DATA ON COMPONENTS
Chemical Description: This product is a mixture of the substances listed below
with nonhazardous additions.
Dangerous components;
--------------------------------------------------------------------------------
108-88-3 Toluene Xn, F; R 11-20 32.12 %
74-98-6 propane F+: R 12 25.21 %
106-97-8 n-butane F+: R 12 14.81 %
67-64-1 acetone Xi, F: R 11-36-66-67 9.29 %
64742-47-8 Mineral Spirits Xn, F: R 11-65 6.14 %
7429-90-5 Aluminum flake Xi: R 37 2.19 %
Additional information; For the wording of the listed risk phrases refer to
Section 3.
3. HAZARDS IDENTIFICATION
Hazard description; Xn Harmful
F+ Extremely flammable
Physical and
Environmental dangers: Warning! Pressurized container.
R 12 Extremely flammable.
R 20 Harmful by inhalation.
Pressurized container: protect from sunlight and do not expose
to temperatures exceeding 50ºC, i.e. electric lights. Do not
pierce or burn, even after use.
Keep out of the reach of children.
NFPA ratings (scale 0 - 4): Health = 1
Fire = 4
Reactivity = 3
HMIS ratings (scale 0 - 4): Health = 1
Fire = 4
Physical Hazard = 3
4. FIRST AID MEASURES
General information; Symptoms of poisoning may occur even after several hours.
Medical observation for at least 48 hours after the accident is recommended.
After inhalation; In case of unconsciousness, place patient in side position
for transportation. Supply fresh air. If necessary, provide artificial
respiration. Keep patient warm. Consult doctor if symptoms persist.
After skin contact; Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
Then consult a doctor.
After swallowing: Consult a doctor if symptoms persist.
5. FIRE FIGHTING MEASURES
Extinguishing agents: CO2, sand, extinguishing powder, or water spray. Fight
larger fires with water spray or alcohol resistant foam.
Protective equipment: A respiratory protective device may be necessary when
spraying in a confined or poorly ventilated workspace to avoid over-exposure.
6. ACCIDENTAL RELEASE MEASURES
Personal safety
precautions: Wear protective equipment. Keep unprotected persons away.
Environmental safety
precautions: Do not allow product to reach sewage systems or ground water.
Inform appropriate authorities in case of seepage into water course or sewage
system.
Measures for cleaning/
collecting: Do not flush with water or aqueous cleansing agents. Use diluted
caustic solution. Soak up spills with inert absorbent material. Refer to section
13 for disposal information.
7. HANDLING AND STORAGE
Safe handling
information: Ensure good ventilation/exhaustion at the workplace.
Handle carton and cans with care. Avoid dropping.
Fire/explosion
protection: Do not spray on a naked flame or any incandescent material.
Keep ignition sources away - Do not smoke. Protect against electrostatic
charges.
Storage requirements: Observe official regulations on storing packaging with
pressurized containers. Consult with your local authorities.
Keep away from sources of heat and direct sunlight. Do not warehouse in
subfreezing conditions.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION:
Components with limit values that require monitoring at the workplace.
108-88-3 toluene
PEL Short-term value: C 300: 500* ppm
Long-term value: 200 ppm
*10-min peak per 8-hr shift
REL Short-term value: 560 mg/m3, 150 ppm
Long-term value: 375 mg/m3, 100 ppm
TLV 188 mg/m3, 50 ppm
Skin: BEI
74-98-6 propane
PEL 1800 mg/m3, 1000 ppm
REL 1800 mg/m3, 1000 ppm
TLV (4508) mg/m3, (2500) ppm
106-97-8 n-butane
REL 1900 mg/m3, 800 ppm
TLV 1900 mg/m3, 800 ppm
67-64-1 acetone
PEL 2400 mg/m3, 1000 ppm
REL 590 mg/m3, 250 ppm
TLV Short-term value: 1782 mg/m3, 750 ppm
Long-term value: 1188 mg.m3, 500 ppm
BEI
64742-47-8 Mineral Spirits
TLV 200 mg/m3
As total hydrocarbon vapor: Skin: (P)
7429-90-5 Aluminum flake
PEL 15*: 5** mg/m3
*Total dust ** Respirable fraction
REL 10*: 5** mg/m3
Metal dust: *Total dust ** Respirable fraction
TLV 10 mg/m3
Metal dust
Protective hygienic
measures: Keep away from foodstuffs, beverages, and animal feed.
Wash hands before breaks and at the end of work.
Breathing
equipment: A respirator is generally not necessary when using this product
outdoors or in large open areas. In cases of inadequate ventilation, a
respiratory protective device should be worn to prevent overexposure.
Protection of hands: Protective gloves. The glove material has to be
impermeable and resistant to the substance. No glove recommendation can be
given.
Eye protection: Tightly sealed goggles.
9. PHYSICAL AND CHEMICAL PROPERTIES
General Information:
Form: Aerosol
Color: According to trade name description in section 1.
Boiling point/
Boiling range; -44ºC (-47ºF)
Flash point; -19ºC (-2ºF)
Ignition temperature: 210.0ºC (410ºF)
Auto igniting; Product is not self-igniting.
Danger of explosion; Heating may cause an explosion.
In use, may form flammable/explosive vapor-air mixture.
Lower Explosion Limit: 1.2 Vol %
Upper Explosion Limit: 10.9 Vol %
Vapor Pressure; 40 PSI, 2750 hPa
Density: Not determined.
Specific Gravity; Between 0.77 and 0.90 (Water equals 1.00)
VOC content; 0.79 kg/l / 6.61 lb/gl
VOC in weight percent (less acetone): 79.2 %
Solids content; 11.5 %
10. STABILITY AND REACTIVITY:
Conditions to be avoided: Do not allow the can to exceed 120 degrees
Fahrenheit. Stable at normal temperatures.
Possibility of Hazardous
Reactions: No dangerous reactions known.
11. TOXICOLOGICAL INFORMATION:
Primary effect on the skin: No irritant effect.
Primary effect on the eye: No irritating effect.
Sensitization: No sensitizing effects known.
Additional toxicological
information: Harmful
12. ECOLOGICAL INFORMATION
Other information; This product does not contain any chlorinated solvents or
lead. No specific ecological data is available for this product.
Aquatic toxicity; Harmful to aquatic organisms.
Hazardous for water, do not empty into drains.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of in accordance with local, state, and federal
regulations. Do not puncture, incinerate, or compact. Partially empty cans
cannot be disposed of with regular trash. Do not heat or cut empty containers
with electric or gas torches.
Recommendation; Empty cans should be recycled.
14. TRANSPORT INFORMATION
Hazard class: 2.1
Identification number; N/A
ADR/RID class; 2 Gases
Item: 5 F
UN-Number; 1950
IMDG Class: 2
Page; 2102
Packaging group: II
EMS Number; 2-13
MFAG: 620
Marine pollutant; No
ICAO/IATA Class: 2.1
Proper shipping name; Aerosols, Flammable
Consumer Commodity ORM-D
15. REGULATIONS
SARA Section 355 (extremely hazardous substances):
None of the ingredients in this product are listed.
SARA Section 313 (Specific toxic chemical listings):
108-88-3 toluene
TSCA (Toxic Substances Control Act): All ingredients are listed.
PROPOSITION 65 Chemicals known to cause cancer:
None of the ingredients in this product are listed.
PROPOSITION 65 Chemicals known to cause reproductive toxicity:
108-88-3 toluene
EPA:
108-88-3 toluene D
67-64-1 acetone D
IARC: Group 2B: The ingredient is possibly carcinogenic to humans.
There is limited evidence of carcinogenicity.
Group 3: The ingredient is unclassifiable as to its carcinogenicity
to humans.
108-88-3 toluene 3
ACGIH TLVs: A1-designates a confirmed human carcinogen.
A2-designates a suspected human carcinogen.
A3- designates an animal carcinogen.
A4-designates "not classifiable as a human carcinogen".
108-88-3 toluene A4
67-64-1 acetone A4
NIOSH:
None of the ingredients is listed.
16. OTHER INFORMATION
This information is based on our present knowledge. However, this shall not
constitute a guarantee for any specific product features and shall not establish
a legally valid contractual relationship.
Contact; Craig Swafford, Regulatory Affairs.
Email: cswafford@seymourpaint.com
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |