MSDS 82112

                        MATERIAL SAFETY DATA SHEET
This MSDS complies with OSHA'S Hazard Communication Standard 29 CFR 1910.1200 
and OSHA Form 174

               IDENTITY AND MANUFACTURER'S INFORMATION
NFPA Rating:   Health-0:   Flammability-1:     Reactivity 0: Special- 
HMIS Rating:     Health-0:   Flammability-1:      Reactivity-0     Personal Protection-

Manufacturer's Name:    DYNAFLUX, INC.
                              241 Brown Farm Road
                              Cartersville, GA  30120

DOT Hazard Classification: Welding Compound 50390
Identity (trade name as used on label): CREST NOZZLE GEL
                                                  ULTRA NOZZLE GEL

Date Prepared: 5/1/96      Prepared By: GS      MSDS Number 731   Revision: 7/25/02
Information calls: (800) 334-4420
Emergency Response Number:  CHEMTEL  1(800) 255-3924

NOTICE; JUDGMENT BASED ON INDIRECT TEST DATA

SECTION 1 - MATERIAL IDENTIFICATION AND INFORMATION

Components-               CAS      SARA       OSHA PEL      ACGIH      Carcinogen
Chemical Names and      Number   III List    (PPM)        TLV (ppm)  Ref. source*
Common Names
(Hazardous Components
1% or greater. Carcinogens
0.1    % or greater)

No hazardous materials. 

Contents: Petrolatum

SECTION 2- PHYSICAL / CHEMICAL CHARACTERISTICS

Boiling Point: GT 575 F IBP  NA        Specific Gravity (H20=1):  0.831
Vapor Pressure:  (PSIG @ 70 F  (Aerosols):  NA
Vapor Pressure: (Non-Aerosols) (mm Hg and Temperature):  NA
Vapor Density; (Air=1):   NA
Evaporation Rate  (BUAC=1):  NA
Solubility in Water:  Negligible 
Water Reactive;   NO
Appearance and Odor:  Blue paste hydrocarbon:  No odor

SECTION 3 - FIRE AND EXPLOSION HAZARD DATA

FLAMMABILITY as per USA FLAME PROJECTION TEST (aerosols)  NA
Auto Ignition Temperature :  NA
Flammability Limits in air by % in Volume:  % LEL:  NA        % UEL:  NA

FLASH POINT AND METHOD USED (non-aerosols):  425 F TCC
SPECIAL FIRE FIGHT PROCEDURES:  None

EXTINGUISHER MEDIA;  Dry Foam, carbon dioxide

Unusual Fire & Explosion Hazards;  None

SECTION 4 - REACTIVITY HAZARD DATA

Stability:    [X] Stable    [ ] Unstable        
Hazardous Polymerization  [ ] Will        [X] Will Not Occur
Incompatibility (Mat. To Avoid): Strong oxidizing agents
Conditions To Avoid:   None
Hazardous Decomposition Products:  May form carbon monoxide and dioxide.

SECTION 5 - HEALTH HAZARD DATA

Primary Routes of Entry:     [ ] Inhalation   [ ] Ingestion  [ ] Skin Absorption
                                   [ ] Eye     [X] Not Hazardous
ACUTE EFFECTS;
Inhalation:  None
Eye Contact: Reddening of eyes
Skin Contact:  Reddening of skin
Ingestion:  None
CHRONIC EFFECTS;  Mild irritant
Medical conditions Generally Aggravated by Exposure:  None

                     EMERGENCY FIRST AID PROCEDURES
Eye Contact:    Wash with water
Skin Contact:    Wash with water
Inhalation:    NA
Ingestion:    Drink two glasses of water

SECTION 6 - CONTROL AND PROTECTIVE MEASURES

Respiratory Protection (specify type):  Normally not required
Protective Gloves;  Rubber if desired
Eye Protection: Safety glasses or face shield. 
Ventilation Requirements:  NA
Other Protective Clothing & Equipment:  Normally not required
Hygienic Work Practices:  NA

SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE

Steps To Be Taken if Material is Spilled or Released; Sweep up onto paper and 
discard.
Larger spill should be collected and reused. 
Waste Disposal Methods; In accordance with local, state and federal regulations. 
Precautions To Be Taken Handling & Storage: Keep in cool place. Empty containers 
must be considered a fire hazard. 
Other Precautions & / or Special Hazards; KEEP OUT OF REACH OF CHILDREN. 
We believe the statements, technical information and recommendations contained 
herein are reliable, but they are given without warranty or guarantee of any 
kind. 
*Chemical Listed as Carcinogen or Potential Carcinogen. 
[a] NPT [b] IARC Monograph
[c] OSHA [d] Not Listed [e] Animal Data Only. 

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2010 Imperial Supplies LLC Questions or comments? Contact us.