MSDS 73848

                           MATERIAL SAFETY DATA SHEET

   
    PART# 66261131689
    DATE PRINTED: JUL 31, 2007
    MSDS NO. ALCOAT001ZN           OUTBOUND
    Aluminum Oxide Coated Abrasive


              SECTION   1. CHEMICAL PRODUCT AND COMPANY INFORMATION

  PRODUCT NAME
  Aluminum Oxide Coated Abrasive
  TRADE NAME
  No-Fil ADALOX or METALITE  CAP Codes: A2XX
  MANUFACTURER(4)
  Saint-Gobain Abrasives, Inc.
  One New Bond Street
  Worcester, MA 01615-0008
  (508) 795-5000
  REVISION DATE
   1/22/2007
  MSDS PRINT FORMAT
  NUSA


               SECTION   2. COMPOSITION/INFORMATION ON INGREDIENTS

  SUBSTANCE DESCRIPTION                PERCENT     CAS#
  Aluminum Oxide, Non-fibrous      15.000- 25.000  1344-28-1
  Cloth or Paper Backing           45.000- 55.000  N/A
  Binder System               **    5.000- 27.000  N/A
  Zinc Stearate(*)                  3.000- 13.000  557-05-1

  ** SUBSTANCE IS A COMPOUND AND/OR MIXTURE
  OTHER
  (*) This substance is regulated under section 313 of the Emergency
  Planning and Community Right - to - Know Act of 1986 and the Canadian
   National Pollution Reduction Initiative(NPRI).


                       SECTION   3. HAZARDS IDENTIFICATION

  INHALATION ACUTE EXPOSURE EFFECTS
  Dust may be slightly irritating to eyes and respiratory tract at
  high concentrations.
  INHALATION CHRONIC EXPOSURE EFFECTS
  Chronic: May affect breathing capacity.
  For products containing phenol/formaldehyde resin, dust generated
  from intended use may contain trace amounts of phenol and
  formaldehyde which under excessive exposure may cause skin
  sensitization and airway obstruction.

  For products containing inorganic fluorides:
  Excessive exposure to inorganic fluorides have been shown to
  increase bone density.
  EYE CONTACT ACUTE EXPOSURE EFFECTS
  Dust may irritate eyes.
  SKIN CONTACT ACUTE EXPOSURE EFFECTS
  Some may experience skin irritation from dust.
  INGESTION ACUTE EXPOSURE EFFECTS
  No known adverse effects, but ingestion not recommended.


                         SECTION   4. FIRST AID MEASURES

  INHALATION
  Remove to fresh air. If breathing has stopped, give artificial
  respiration. Get medical attention immediately.
  SKIN CONTACT
  Wash affected areas with soap and water. Obtain medical assistance.
  EYE CONTACT
  Wash with large amounts of water. Obtain first aid and medical
  assistance, if needed.
  INGESTION
  Call poison control center, hospital emergency room or physician
  immediately.


                       SECTION   5. FIRE FIGHTING MEASURES

  FIRE FIGHTING PROCEDURES
  Not Applicable
  HAZARDOUS PRODUCTS/COMBUSTION
  None.
  HAZARD RATING SOURCE
  NFPA
  HEALTH
  1
  FLAMMABILITY
  0
  REACTIVITY
  0
  OTHER


                    SECTION   6. ACCIDENTAL RELEASE MEASURES

  CLEAN-UP
  Follow normal clean up procedures.


                        SECTION   7. HANDLING AND STORAGE

  HANDLING
  Handle with adequate ventilation for nuisance dust.


               SECTION   8. EXPOSURE CONTROLS/PERSONAL PROTECTION

  VENTILATION PROTECTION
  Recommend using local exhaust ventilation when general ventilation is
   not keeping the airborne concentration below the TLV.
  RESPIRATORY PROTECTION
  Respirators are required when airborne contaminant levels exceed the
  TLV(s).
  EYE PROTECTION
  Always WEAR SAFETY GLASSES or some type of eye protection while
  sanding.
  OTHER PROTECTION
  Use of this product may create elevated sound levels. Hearing
  protection should be worn where required (see OSHA 29 CFR 1910.134
  and other applicable regulations).


                  SECTION   9. PHYSICAL AND CHEMICAL PROPERTIES

  APPEARANCE & ODOR
  Solid article. Odorless.


                      SECTION  10. STABILITY AND REACTIVITY

  INCOMPATIBILITIES
  Avoid acids of all types with a pH < 4.0.
  DECOMPOSITION
  In use, dust and decomposing odors may be generated. In most cases,
  the material removed from the workplace will be significantly
  greater than the sandpaper components.


                     SECTION  11. TOXICOLOGICAL INFORMATION

  CARCINOGENICITY
  Not Applicable
  LD50/LC50
  Values are not appropriate or available.


                       SECTION  12. ECOLOGICAL INFORMATION

  CHEMICAL FATE
  Not Applicable


                      SECTION  13. DISPOSAL CONSIDERATIONS

  WASTE DISPOSAL
  Use standard landfill methods consistent with applicable Federal,
  State, Provincial and local laws.


                       SECTION  14. TRANSPORT INFORMATION

  HAZARD CLASS
  This product is not hazardous as defined by the Department of
  Transportation.(USA)
  This product is "Not Regulated" under the Transportation of
  Dangerous Goods Act. (CAN)


                       SECTION  15. REGULATORY INFORMATION

                         EXPOSURE LIMITS/REGULATORY INFORMATION

  SUBSTANCE DESCRIPTION        UNITS           OSHA        ACGIH       MOL
  Aluminum Oxide, Non-fibrous
                               MG/M3        15.0000     10.0000     10.0000
  Cloth or Paper Backing
                               PPM           0.0000      0.0000      0.0000
  Binder System
                               PPM           0.0000      0.0000      0.0000
  Zinc Stearate(*)
                               MG/M3        10.0000     10.0000     10.0000

  LEGEND:

  EXPOSURE LIMIT DESCRIPTIONS
  CA PROP 65
  Not Applicable
  TSCA
  Section 8(b) - Inventory Status

  All components of this product are registered under the regulations
  of the Toxic Substance Control Act.
  DOMESTIC SUBSTANCE LIST
  All components of this product are found on the Domestic Substance
  List.


                         SECTION  16. OTHER INFORMATION

  DISCLAIMER
  The information and recommendations set forth herein are taken
  from sources believed to be accurate as of the date hereof; however,
  the Company makes no warranty with respect to the accuracy of the
  information or the suitability of the recommendations, and assumes
  no liability to any user thereof.

      
___________________________________________________________________________
       KEY TO ABBREVIATIONS:

       EQ=EQual                LT=Less Than            GT=Greater Than
       AP=APproximately        TR=TRace                ND=No Data available

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2010 Imperial Supplies LLC Questions or comments? Contact us.