Start an Order |
|
|
|
| |
Start an Order |
||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 73622 -- [Back] | |||
|
MSDS 73622 73622: 3M Cut Off Whl 3x1/32x3/8 [5]73623: 3M Cut Off Whl 3x1/16x3/8 [5] 73624: 3M Cut Off Whl 4x1/32x3/8 [5] 73626: 3M Grinding Wheel 3x3/16x3/8 [5] MSDS Last updated: 10/29/2009
MATERIAL SAFETY DATA SHEET
3M Green Corps Cut-Off Wheels, All Sizes 04/13/09
3M
Material Safety Data Sheet
Copyright, 2009, 3M Company. All rights reserved. Copying and/or downloading
of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from 3M, and (2) neither the copy
nor the original is resold or otherwise distributed with the intention of
earning a profit thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME 3M Green Corps Cut-Off Wheels, All Sizes
MANUFACTURER 3M
DIVISION: Abrasives Systems Division
ADDRESS 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 04/13/09
Supercedes Date: 03/05/09
Document Group: 11-5827-8
Product Use:
Intended Use: Abrasive Product
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
Cubitron 66402-68-4 50-70
Fiber Glass Cloth Screen None 10-30
Cured Adhesive Mixture 10-20
Inorganic Fluoride 15096-52-3 10-20
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: Solid Abrasive Product
General Physical Form Solid
Immediate health, physical, This document covers only the 3M
and environmental hazards: product. For complete assessment, when
determining the degree of hazard, the
material being abraded must also be
considered.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Mechanical eye irritation: Signs/symptoms may include pain, redness,
tearing and corneal abrasion.
Dust created by cutting, grinding, sanding, or machining may cause eye
irritation. Signs/symptoms may include redness, swelling, pain, tearing,
and blurred or hazy vision.
Skin Contact:
Mechanical Skin irritation: Signs/symptoms may include abrasion,
redness, pain, and itching.
Inhalation:
Dust from cutting, grinding, sanding or machining may cause irritation
of the respiratory system. Signs/symptoms may include cough, sneezing,
nasal discharge, headache, hoarseness, and throat pain.
Prolonged or repeated exposure may cause:
Pneumoconiosis: Sign/symptoms may include persistent cough,
breathlessness, chest pain, increased amounts of sputum, and changes in
lung function tests.
May be absorbed following inhalation and cause target organ effects.
Ingestion:
No health effects are expected.
Target Organ Effects:
Prolonged or repeated exposure may cause:
Hard Tissue Effects: Sign/symptoms may include color changes in the
teeth and nails; changes in development of bone, teeth or nails;
weakening of the bones; and/or hair loss.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that
appropriate personal and industrial hygiene practices are followed.
Eye Contact: Flush eyes with large amounts of water. If
signs/symptoms persist, get medical attention.
Skin Contact: Wash affected area with soap and water. If
signs/symptoms develop, get medical attention.
Inhalation: Remove person to fresh air. If signs/symptoms develop,
get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of
water. Never give anything by mouth to an unconscious
person. Get immediate medical attention. No need for
first aid is anticipated.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Autoignition temperature Not Applicable
Flash Point Not Applicable
Flammable Limits-LEL Not Applicable
Flammable Limits-UEL Not Applicable
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A
extinguishing agents (e.g., water, foam).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker
Gear) and a self-contained breathing
apparatus (SCBA).
Unusual Fire and Explosion Not applicable. None inherent in this
Hazards: product.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and
thermal decomposition information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Not applicable.
In the event of a release of this material, the user should determine if
the release qualifies as reportable according to local, state, and
federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
For industrial or professional use only. Avoid breathing of dust created by
sanding, grinding or machining. Damaged product can break apart during use and
cause serious injury to face or eyes. Check product for damage such as cracks
or nicks prior to use. Replace if damaged. Always wear eye and face protection
when working at or sanding or grinding operations or when near such operations.
Sparks and particles flying from the product during sanding or grinding can
cause injury and fire.
7.2 STORAGE
Store in a cool, dry place.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Provide appropriate local exhaust for cutting, grinding, sanding or
machining. Use general dilution ventilation and/or local exhaust ventilation to
control airborne exposures to below Occupational Exposure Limits and/or control
dust, fume, or airborne particles. If ventilation is not adequate, use
respiratory protection equipment.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact. To minimize the risk of injury to face and eyes, always wear
eye and face protection when working at sanding or grinding operations or when
near such operations.
The following eye protection(s) are recommended: Safety Glasses with side
shields.
8.2.2 Skin Protection
Avoid skin contact. Wear appropriate gloves to minimize risk of injury to skin
from contact with dust or physical abrasion from grinding or sanding.
8.2.3 Respiratory Protection
Avoid breathing of dust created by sanding, grinding or machining. Assess
exposure concentrations of all materials involved in the work process. Consider
material being abraded when determining the appropriate respiratory protection.
Select and use appropriate respirators to prevent inhalation overexposure.
Select one of the following NIOSH approved respirators based on airborne
concentration of contaminants and in accordance with OSHA regulations: Half
face piece or fullface air-purifying respirator with N95 particulate filters.
Consult the current 3M Respiratory Selection Guide for additional information
or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Not an expected route of exposure. Wash hands after handling and before eating.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
FLUORIDES ACGIH TWA, as F 2.5 mg/m3 Table A4
FLUORIDES OSHA TWA, as F 2.5 mg/m3 Table Z-1A
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Odor, Color, Grade: Solid Abrasive Product
General Physical Form: Solid
Autoignition temperature Not Applicable
Flash Point Not Applicable
Flammable Limits-LEL Not Applicable
Flammable Limits-UEL Not Applicable
Boiling point Not Applicable
Vapor Density Not Applicable
Vapor Pressure Not Applicable
Specific Gravity Not Applicable
pH Not Applicable
Melting point Not Applicable
Solubility In Water Not Applicable
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Not applicable
Hazardous Polymerization: Hazardous Polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Hydrogen Fluoride During Combustion
Hazardous Decomposition: Under recommended usage conditions, hazardous
decomposition products are not expected. Hazardous decomposition products may
occur as a result of oxidation, heating, or reaction with another material.
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for
Toxicological Information on this material and/or its components.
SECTION 12; ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: The substrate that was abraded must be considered as a
factor in the disposal method for this product. Dispose of waste product in a
sanitary landfill. As a disposal alternative, incinerate in an industrial or
commercial facility in the presence of combustible material. Combustion
products will include HF. Facility must be capable of handling halogenated
materials.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities
before disposal.
SECTION 14: TRANSPORT INFORMATION
Not regulated per U.S. DOT, IATA or IMO.
These transportation classifications are provided as a customer service.
As the shipper YOU remain responsible for complying with all applicable
laws and regulations, including proper transportation classification and
packaging. 3 M's transportation classifications are based on product
formulation, packaging, 3 M policies and 3 M's understanding of
applicable current regulations. 3 M does not guarantee the accuracy of
this classification information. This information applies only to
transportation classification and not the packaging, labeling, or
marking requirements. The original 3 M package is certified for U.S.
ground shipment only. If you are shipping by air or ocean, the package
may not meet applicable regulatory requirements.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3 M for more information.
311/312 Hazard Categories:
Fire Hazard-No Pressure Hazard-No Reactivity Hazard-No Immediate Hazard-Yes
Delayed Hazard-Yes
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
This product is an article as defined by TSCA regulations, and is exempt from
TSCA Inventory listing requirements.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
WHMIS: Hazardous
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 1 Flammability: 1 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use
by emergency response personnel to address the hazards that are presented by
short-term, acute exposure to a material under conditions of fire, spill, or
similar emergencies. Hazard ratings are primarily based on the inherent
physical and toxic properties of the material but also include the toxic
properties of combustion or decomposition products that are known to be
generated in significant quantities.
Revision Changes:
Section 1: Product name was modified.
Section 14: Transportation legal text was modified.
Page Heading: Product name was modified.
Section 2: Ingredient table was modified.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is
believed to be correct as of the date issued. 3M MAKES NO WARRANTIES,
EXPORESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURS OF PERFORMANCE OR
USAGE OF TRADE. User is responsible for determining whether the 3M product is
fit for a particular purpose and suitable for user's method of use or
application. Given the variety of factors that can affect the use and
application of a 3 M product, some of which are uniquely within the user's
knowledge and control, it is essential that the user evaluate the 3M product to
determine whether it is fit for a particular purpose and suitable for user's
method of use or application.
3M provides information in electronic form as a service to its customers. Due
to the remote possibility that electronic transfer may have resulted in errors,
omissions or alteration in this information, 3M makes no representations as to
its completeness or accuracy. In addition, information obtained from a database
may not be as current as the information in the MSDS available directly from
3M.
3M MSDSs are available at www.3M.com
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
