![]() |
![]() |
![]() |
|
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 73224 -- [Back] | |||
|
MSDS 73224 73224: Imperialok R 3"Med Surfdsc Mrn [10]MSDS Last updated: 04/12/2006
SHARK
Division of Shark Industries Ltd.
6700 Bleck Drive
Rockford, Minnesota 55373
SANDMATE-MATERIAL SAFETY DATA SHEET
Date Revised; Nov 1, 1996
1. GENERAL INFORMATION; PRODUCT; Sandtex discs
--------------------------------------------------------------------------------
CHEMICAL NAME & SYNONYMS; TRADE NAME & SYNONYMS;
Sanding disc Sandtex Surface Conditioning discs.
CHEMICAL FAMILY; N/A FORMULA; N/A
PROPER DOT SHIPPING NAME; DOT HAZARD CLASSIFICATION;
Not restricted Not restricted
PRODUCT Range; Rolls, discs and belts MANUFACTURERS PHONE;
# 800-537-4275
CHEMTREC PHONE #; Not used
2. INGREDIENTS
--------------------------------------------------------------------------------
PRINCIPAL HAZARDOUS COMPONENTS % OEL/TLV
Abrasive Aluminum Oxide 10mg/m3
Binder Polyurethane
Scrim Polyester
Fiber Nylon
Proprietary
3. PHYSICAL DATA
--------------------------------------------------------------------------------
BOILING POINT; SPECIFIC GRAVITY;
NA NA
VAPOR PRESSURE; PERCENT VOLATILE BY VOLUME %;
NA NA
VAPOR DENSITY; EVAPORATION RATE ( =1)
NA NA
SOLUBILITY IN WATER;
Not soluble in water
APPEARANCE & ODOR;
Grinding disc No odor
4. FIRE & EXPLOSION HAZARD DATA
--------------------------------------------------------------------------------
FLASH POINT (TEST METHOD):
NA
AUTO IGNITION TEMPERATURE;
LEL; NA
UEL; NA
FLAMMABLE LIMITS;
NA
EXTINGUISHING MEDIA;
Water, CO2, foam extinguisher
SPECIAL FIRE FIGHTING PROCEDURES;
None
UNUSUAL FIRE & EXPLOSION HAZARDS;
Burns readily-gives off toxic fumes.
Breathing apparatus should be worn to fight serious fires in confined spaces.
5. HEALTH HAZARD DATA PRODUCT; Sandtex discs
--------------------------------------------------------------------------------
THRESHOLD VALUE; OSHA THRESHOLD ACGIH THRESHOLD
VALUE LIMIT VALUE
NA NA NA
CARCINOGEN-NTP PROGRAM; CARCINOGEN-LARC PROGRAM
NA NA
SYMPTOMS OF EXPOSURE;
NA
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE;
NA
PRIMARY ROUTES OF ENTRY;
NA
EMERGENCY FIRST AID;
NA
6. REACTIVITY DATA;
--------------------------------------------------------------------------------
STABILITY; CONDITIONS TO AVOID;
NA NA
INCOMPATIBILITY; MATERIALS TO AVOID;
NA NA
HAZARDOUS POLYMERIZATION; CONDITIONS TO AVOID;
Will not occur NA
HAZARDOUS DECOMPOSITION PRODUCTS;
NA
7. ENVIRONMENTAL PROTECTION PROCEDURE
--------------------------------------------------------------------------------
SPILL RESPONSE;
NA
WASTE DISPOSAL METHOD;
Ordinary waste which can be dumped at normal Disposal.
For dumping to Incinerators under controlled conditions.
OTHER PRECAUTIONS
Use eye and body protection during grinding.
8. SPECIAL PROTECTION INFORMATION
--------------------------------------------------------------------------------
EYE PROTECTION; SKIN PROTECTION;
Yes Protective gloves
RESPIRATORY PROTECTION (SPECIFIC TYPE) VENTILATION RECOMMENDED;
Good ventilation
OTHER PROTECTION;
Full body protection and observe recommended running speeds.
9. SPECIAL PRECAUTIONS
--------------------------------------------------------------------------------
HYGIENIC PRACTICES IN HANDLING & STORAGE;
Normal and clean work practices are recommended.
PRECAUTIONS FOR REPAIR & MAINTENANCE OF CONTAMINATED EQUIPMENT;
NA
OTHER PRECAUTIONS;
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |