MSDS Sheet 71470

• All Products
• Fasteners
   » Grade 8
   » Grade 5
   » Threaded Fasteners
• Hardware
• Rivet & Rivet Guns
• Vehicle Lighting
• Electrical Products
• Tubing & Tube Fittings
• Air Brake Products
• Hose & Hose Ends
• Cutting Tools
• Abrasives
• Safety Products &
  Welding Supplies
• Chemicals & Paint
   » MSDS Information
   » CA/OTC Information
• Shop Supplies
• Vehicle Parts &
  Accessories
• Assortments &
  Steel Equipment
   » Assortment Listing

• Online Catalog Index
• Discontinued &
Overstock Specials

Printer-Friendly View

MATERIAL SAFETY DATA SHEET PART No. # A04-084-0022 MSDS 71470 DATE PRINTED: March 22, 2007 MSDS N. ALCOAT001 OUTBOUND CARBORUNDUM ALUMINUM OXIDE COATED ABRASIVE SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION PRODUCT NAME: Aluminum Oxide Coated Abrasive MANUFACTURER (1): SELF REAL IZATION CO. LTD #107-1 LANE 580, YUNHUEI SECTION 1, YUNLIN JEN, CHANG HWA CITY, TAIWAN, R.O.C. TEL: (+886) -4- 8337992 FAX: (+886) -4- 8334305 REVISION DATE: 03/23/2007 MSDS PRINT FORMAT: CANAUSA SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS SUBSTANCE DESCRIPTION PERCENT CAS# Aluminum Oxide, Non-Fibrous 25.000 - 35.000 1344-28-1 Cloth or Paper Backing 36.000 - 46.000 N/A Binder System 18.000 - 28.000 N/A Calcium Carbonate 10.000 - 20.000 1317-65-3 . SUBSTANCE IS A COMPOUND AND/OR MIXTURE OTHER: Not Applicable SECTION 3. HAZARDS IDENTIFICATION INHALATION ACUTE EXPOSURE EFFECTS Dust may be slightly irritation to eyes and respiratory tract at high concentrations. INHALATION CHRONIC EXPOSURE EFFECTS Chronic: May affect breathing capacity. For products containing phenol / formaldehyde resin, dust generated from intended use may contain trace amounts of phenol and formaldehyde which under excessive exposure may cause skin sensitization and airway obstruction. For products containing inorganic fluorides: Excessive exposure to inorganic fluorides has been shown to increase bone density. EYE CONTACT ACUTE EXPOSURE EFFECTS Dust may irritate eyes. SKIN CONTACT ACUTE EXPOSURE EFFECTS Some may experience skin irritation from dust. INGESTION ACUTE EXPOSURE EFFECTS No known adverse effects, but ingestion not recommended. SECTION 4. FIRST AID MEASURES INHALATION Remove to fresh air. If breathing has stopped, give artificial respiration. Get medical attention immediately. SKIN CONTACT: Wash affected areas with soap and water. Obtain medical assistance. EYE CONTACT: Wash with large amounts of water. Obtain first aid and medical assistance, if needed. INGESTION: Call poison control center, hospital emergency room or physician immediately. SECTION 5. FIRE FIGHTING MEASURES FIRE FIGHTING PROCEDURES: Not Applicable FLASH POINT: F C NA HAZARDOUS PRODUCTS / COMBUSTION: NONE HAZARD RATING SOURCE: NFPA HEALTH: 1 FLAMMABILITY: 0 REACTIVITY: 0 OTHER: 0 SECTION 6. ACCIDENTAL RELEASE MEASURES CLEAN-UP: Follow normal clean up procedures. SECTION 7. HANDLING AND STORAGE HANDLING: Handle with adequate ventilation for nuisance dust. SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION VENTILATION PROTECTION Recommend using local exhaust ventilation when general ventilation is not keeping the airborne concentration below the TLV. RESPIRATORY PROTECTION Respirators are required when airborne contaminant levels exceed the TLV(S). EYE PROTECTION Always wear safety glasses or some type of eye protection while sanding. OTHER PROTECTION Use of this product may create elevated sound levels. Hearing protection should be worn where required (as OSHA 29 CFR 1910.134 and other applicable regulations). SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE & ODOR: Solid article, Odorless SECTION 10. STABILITY AND REACTIVITY INCOMPATIBILITIES: Avoid acids of all types with a PH < 4.0 DECOMPOSITION: In use, dust and decomposing odors may be generated. In most cases, the material removed from the workplace will be significantly greater than the sandpaper components. Coolants may produce other decomposition products. For products containing phenol and formaldehyde resin, thermal decomposition may produce trace amounts of phenol and formaldehyde. For products containing inorganic fluorides, thermal composition may produce amounts of fluorides. SECTION 11. TOXICOLOGICAL INFORMATION CARCINOGENICITY: Not applicable LD50 / LC50 Values are not appropriate or available. SECTION 12. ECOLOGICAL INFORMATION CHEMICAL FATE: Not Applicable SECTION 13. DISPOSAL CONSIDERATIONS WASTE DISPOSAL: Use standard landfill methods consistent with applicable federal, State, Provincial and local laws. SECTION 14. TRANSPORT INFORMATION HAZARD CLASS: This product is not hazardous as defined by the Department of Transportation. (USA) This product is "Not Regulated" under the Transportation of Dangerous Goods Act. (CAN). SECTION 15. REGULATORY INFORMATION EXPOSURE LIMITS / REGULATORY INFORMATION SUBSTANCE DESCRIPTION UNIT OSHA ACGIH MOL Aluminum Oxide, Non-Fibrous MG/M3 15.0000 10.0000 10.0000 Cloth or paper Backing PPM 0.0000 0.0000 0.0000 Binder System PPM 0.0000 0.0000 0.0000 Calcium Carbonate MG/M3 15.0000 10.0000 10.0000 LEGEND: EXPOSURE LIMIT DESCRIPTIONS CA PROP 65 Not Applicable TSCA SECTION 8. (b) - Inventory Status All components of this product are registered under the regulations of the Toxic Substance Control Act. DOMESTIC SUBSTANCE LIST All components of this product are found on the Domestic Substance List. SECTION 16. OTHER INFORMATION KEY TO ABBREVIATIONS EQ = Equal LT = Less Than GT = Greater Than AP = Approximately TR = Trace ND = No Data Available DISCLAIMER The information and recommendations set forth herein are taken from sources believed to be accurate as of the date hereof: the company makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability to any user thereof.