MSDS 71466

JOHNSON ABRASIVES            MATERIAL SAFETY DATA SHEET
COATED ABRASIVES FOR THE CRAFTSMAN
49 Fitzgerald Drive    Jaffrey, NH 03452      603-532-4434                  
Date;  8/30/01

SECTION 1 - MATERIAL IDENTIFICATION AND USE
Name/Identifier; A/O E-Z Cut Cloth    Flammability; 0       Reactivity; 0
Material; Aluminum Oxide Cloth            Health;       1    Personal:   0

SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIAL

                                  Exposure Limits
Hazardous       Approximate        C.A.S.N.A. or   ACGIH TLV  OSHA PEL  LC50/LC50
Ingredients  Concentration %  U.N. Numbers                         Specify       
                                                                 Species & Route

Aluminum           10-30         1344-28-1      10 mg/M3      N/A      N/A
Oxide (AL 203)

Cured Urea -    10-30          50-00-0      1 ppm (as gas) N/A      N/A
Formaldehyde Resin

SECTION 3 - PHYSICAL DATA OF MATERIAL

Physical State     Odor & Appearance      Odor Threshold (ppm)     Coeff. Of 
Water/Oil
Gas __               Brown abrasive on
Liquid __
Solid  X

Vapor Pressure(mm) Vapor Density(Air=1)  Evaporation rate   Boiling Point© 
     N/A                                    N/A                 N/A
Freezing Point (C)                                                   

Solubility Water (20)         % Volatile (by vol.)       pH     Density (g/ml    
    N/A

Specific Gravity
   N/A                                                                           
                                                

SECTION 4 - FIRE AND EXPLOSION HAZARD OF MATERIAL

Flammability; No  Yes  X   
If YES, under what conditions; Combustion when exposed to direct flame.        
Extinguishing Media;  ANY  ( chemical extinguishers not required)
Means of Extinction; Dry chemical.     Foam CO2. Water
Special Procedures; None

Flash Point © and Method;         UEL (% by vol.):        LEL (% by vol.):
   N/A                                          N/A                       N/A

Auto ignition Temperature ©:     TDG Flammability Classification;
   N/A                                           N/A

Hazardous Combustion Products;
Combustion products may be toxic. No explosion hazard. 

Explosion Data sensitive to impact;        Rate of burning;      Explosive Power;  
   N/A                                               N/A                    N/A
Sensitivity to Static Change;
   N/A

SECTION 5 - REACTIVITY DATA

Chemical Stability; Yes  X       No  __    If NO, under what conditions?
Incompatibility to other substances?  Yes __       No  X  If so which ones?
Reactivity and under what conditions; Grain will not burn, Adhesive may char. 
Backing is combustible. 
Hazardous Decomposition Products; NAIF

SECTION 6 - TOXICOLOGICAL PROPERTIES OF PRODUCT

Route of Entry;  Skin Contact  X      Skin Absorption __     Eye Contact   X
                 Inhalation Acute  X  Inhalation Chronic  X  Ingestion __

Effects of Chronic Exposure to Product; Dust may irritate eyes. Inhalation may 
cause coughing and shortness of breath. Skin may cause physical abrasion. 
Inhalation may effect breathing capacity. 
Emergency First Aid Procedures;
Sensitization to Product;    Synergistic Materials;  Irritancy of Product; 
Exposure limits to Products         N/A                    N/A
      N/A                                                                        
                        
Carcinogenicity;  Reproductive Effects; Tertongenicity;   Mutagenicity;
                       N/A              N/A                  N/A

SECTION 7 - PREVENTIVE MEASURES

Personal Protective Equipment
Gloves: Leather  Respiratory: NIOSH/MSHA  Eye; Safety glasses Footwear: None
                                    Dust masks 

Clothing(Specify);  Long sleeves to minimize   
Other (Specify): Hearing protection may be required.
Engineering Controls (eg ventilation): Local ventilation to keep dust below TLV 
levels. 
Leak and Spill Procedure; Normal clean up procedures (vacuum dust to prevent air 
borne particles).
Waste Disposal; Standard landfill methods consistent with Federal, Provincial 
and Local laws. 
Handling Procedures and Equipment;  NAIF
Storage Requirements; Recommend storage at 40-90 F and 30-80% R.H.
Special Shipping Information; WHMIS Controlled Product Class D28

SECTION 8 - FIRST AID MEASURES

Skin; Wash area thoroughly and cover abraded area with sterile bandage.
      Seek first aid for serious abrasions. 

Eye;  Flush with water for 15 minutes. Obtain First Aid or Medical
      Assistance, if needed. 

Inhalation; Remove to fresh air. Apply artificial respiration as needed.
      Obtain First Aid or Medical Assistance.

Ingestion; No known adverse effects. 

Other Potential Health Risks & General Advise; Good health and safety practice 
requires that MSDS information for the article being sanded be used in 
conjunction with this data in order to provide a full and complete understanding 
of the potential hazards involved. 

SECTION 9 - PREPARATION DATE OF M.S.D.S.

ADDITIONAL INFORMATION COMMENTS. The information contained herein is based on 
data considered accurate. However, no warranty is expressed or implied regarding 
the accuracy of this data or the results to be obtained from the use thereof. 
Vendor assumes no responsibility for injury to vendee third person approximately 
caused by the material if reasonable safety procedures are not adhered to as 
stipulated in the data sheet. Additionally, vendor assumes no responsibility for 
injury to vendee or third persons proximately cased by abnormal use of the 
material even if reasonable safety procedures are followed. Furthermore, vendee 
assumes all risks in the use of this material. 
Sources Used;
MSDS information from original supplier; ACGIH booklet for TLV.

Key; NAIF=No applicable information found        NA=Not applicable

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.