MSDS 71463

JOHNSON ABRASIVES                                      MATERIAL SAFETY DATA 
SHEET
COATED ABRASIVES FOR THE CRAFTSMAN
49 Fitzgerald Drive    Jaffrey, NH 03452     603-532-4434     Date: 8/30/01

SECTION 1 - MATERIAL IDENTIFICATION AND USE
--------------------------------------------------------------------------------
Name/Identifier:   E-Z Clean Cloth    Flammability:  0        Reactivity:  0
Material:  Aluminum Oxide Cloth       Health:        1        Personal:    0

SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIAL
                                     
                                                                                
--------------------------------------------------------------------------------
Exposure Limits
Hazardous      Approximate      C.A.S. N.A or   ACGIH      OSHA    LD50/LC50
Ingredients    Concentration %  U.N. Numbers     TLV        PEL  Specify Species
                                                                    & Route

Aluminum         10-30           1344-28-1     10mg/m3      N/A     N/A
Oxide (AL 203) 

Cured Urea -     10-30            50-00-0    1ppm (as gas)  N/A                
N/A
Formaldehyde Resin

SECTION 3 - PHYSICAL DATA OF MATERIAL

--------------------------------------------------------------------------------
Physical State     Odor & Appearance     Odor Threshold (ppm)   Coeff. Of
Gas __  Liquid__   Brown abrasive on                            Water/Oil        
   Solid  X

Vapor Pressure  Vapor Density      Evaporation      Boiling      Freezing        
   (mm)          (Air=1)             Rate           Point ©       Point ©
   N/A                               N/A             N/A

Solubility     % Volatile         pH        Density        Specific
Water (20)      (by vol.)                   (g/ml)         Gravity
   N/A                                                       N/A

SECTION 4 - FIRE AND EXPLOSION HAZARD OF MATERIAL

--------------------------------------------------------------------------------
Flammability: No  __  Yes  X  If Yes, under what conditions: Combustion when   
                                      exposed to direct flame.                  
Means of Extinction:  Dry chemical. Foam CO2,  Water.
Special Procedures:  None
Extinguishing Media:  ANY
(chemical extinguishers not required)

Flash Point © and Method:       UEL  (% by vol.):       LEL  (% by vol.):
        N/A                          N/A                    N/A

Auto ignition Temperature ©: TDG Flammability  Hazardous Combustion Products: 
                             Classification:  Combustion products may be toxic. 
                                               No explosion hazard. 
     N/A                          N/A                  
                                                                

Explosion Data sensitive  Rate of burning:  Explosive Power:   Sensitivity to 
to impact:                                                     Static change.
     N/A                        N/A           N/A                N/A

SECTION 5 - REACTIVITY DATA

--------------------------------------------------------------------------------
Chemical Stability:  Yes  X   No __  If NO, under what conditions?
Incompatibility to other substances?:  Yes __   No  X  If so which ones?
Reactivity and under what conditions: Grain will not burn. Adhesive may char. 
Backing is combustible. 
Hazardous Decomposition Products:  NAIF

SECTION 6 - TOXICOLOGICAL PROPERTIES OF PRODUCT

--------------------------------------------------------------------------------

Route of Entry: Skin Contact     X    Skin Absorption    __   Eye Contact  X
                Inhalation Acute X    Inhalation Chronic X    Ingestion   __

Effects of Chronic Exposure to Product: Dust may irritate eyes. Inhalation may 
cause coughing and shortness of breath.
Skin may cause physical abrasion.
Inhalation may effect breathing capacity. 

Emergency First Aid Procedures:

Sensitization  Synergistic     Irritancy of         Exposure limits to 
To Product:     Materials:       Product:              Products:
  N/A             N/A             N/A                    N/A

Carcinogenicity:  Reproductive Effects:   Tertongenicity:    Mutagenicity: 
                    N/A                       N/A                N/A

SECTION 7 -  PREVENTIVE MEASURES

--------------------------------------------------------------------------------
Personal Protective Equipment
Gloves-Leather  Respiratory-NIOSH/MSHA  Eye-Safety glasses  Footwear-none
                            dust masks

Clothing (Specify): Long sleeves to minimize  Other (Specify):Hearing protection
                                                              may be required. 

Engineering Controls (eg. Ventilation):  Local ventilation to keep dust below 
                                         TLV levels.

Leak and Spill Procedure:  Normal clean up procedures (vacuum dust to prevent 
air borne particles).

Waste Disposal: Standard landfill methods consistent with Federal, Provincial 
and local laws. 

Handling Procedures and Equipment:  NAIF

Storage Requirements: Recommend storage at 40-90 F and 30-80% R.H. 

Special Shipping information: WHMIS Controlled Product Class D28

SECTION 8 - FIRST AID MEASURES

--------------------------------------------------------------------------------
Skin:   Wash area thoroughly and cover abraded area with sterile bandage.
        Seek first aid for serious abrasions. 

Eye:    Flush with water for 15 minutes. Obtain First Aid or Medical 
        Assistance, if needed. 

Inhalation:
        Remove to fresh air. Apply artificial respiration as needed.
        Obtain First Aid or Medical Assistance.

Ingestion:
        No known adverse effects. 

Other Potential Health Risks & General Advise:
        Good health and safety practice requires that MSDS information for the
        article being sanded be used in conjunction with this data in         
        order to provide a full and complete understanding of the potential      
        hazards involved. 

SECTION 9 - PREPARATION DATA OF M.S.D.S. 

--------------------------------------------------------------------------------
ADDITIONAL INFORMATION COMMENTS. The information contained herein is based on 
data considered accurate. However, no warranty is expressed or implied regarding 
the accuracy of this data or the results to be obtained from the use thereof. 
Vendor assumes no responsibility for injury to vendee third person approximately 
caused by the material if reasonable safety procedures are not adhered to as 
stipulated in the data sheet. Additionally, vendor assumes no responsibility for 
injury to vendee or third persons proximately caused by abnormal use of the 
material even if reasonable safety procedures are followed. Further more, vendee 
assumes all risks in the use of this material. 

Sources Used:
MSDS information from original supplier.     ACGIH booklet for TLV.

Key:  NAIF=No applicable information found.   N/A=Not applicable

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.