MSDS 71425

  MATERIAL SAFETY DATA SHEET
 
JOHNSON ABRASIVES                  Date: 01/03/01
Coated Abrasives For the Craftsman
49 Fitzgerald Drive
Jaffrey, NH 03452
603-532-4434
 

                   SECTION 1 - MATERIAL IDENTIFICATION AND USE

 
Name/Identifier: RESIN FIBER DISC   Flammability: ______   Reactivity:______
Material;  Type "C" & Type "Z"      Health:       ______  Personal:  ______
 
                  SECTION 2 -  HAZARDOUS INGREDIENTS OF MATERIAL

 
                                             Exposure LimitsLD50/LC50
Hazardous    Approximate  C.A.S.N.A or  ACGIH TLV    OSHA PEL    Specify Species
Ingredients  Concentration%    U.N. Numbers                         & Route
--------------------------------------------------------------------------------
Vulcanized 
Fiber         93           N/A              N/A         N/A         N/A
Aluminum
Oxide A1203   15mg/m3      N/A           10mg/m3     15mg/m3     N/A
Binder System N/A          N/A           N/A         N/A         N/A
Zirconia 
Cryolite
 

                      SECTION 3 - PHYSICAL DATA OF MATERIAL

 
Physical State              Odor & Appearance        Odor Threshold (ppm)     
Coeff Of Water/Oil
 
Gas__Liquid__Solid_X_  Cloth coated with      N/A         N/A
                          abrasive materials

Vapor Pressure-Vapor Density-Evaporation rate-Boiling Point©-Freezing Point©
(mm)           (Air=1)    
 N/A           N/A           N/A                N/A            N/A 
        
Solubility Water-% Volatile  pH -       Density (g/ml)-Specific Gravity
(20)              (20)        (by vol.)              
N/A              N/A         N/A        N/A            N/A


                SECTION 4 -  FIRE AND EXPLOSION HAZARD OF MATERIAL

 
Flammability: Yes   If YES, under what conditions: Combustion when exposed to 
direct flame.    

Extinguishing Media: Water Spray, CO2, Foam, Dry chemical or any class A 
extinguishing agent. 

Means of Extinction:
Special Procedures: Backings will burn and/or decompose, use respiratory 
protection.

Flash Point © and Method:      UEL (% by vol.):      LEL (% by vol.):      
   N/A                            N/A                 N/A

Autoignition Temperature ©:      TDG Flammability Classification:
    N/A                              N/A

Hazardous Combustion Products:  Combustion products may be toxic only in 
restricted, non-ventilated enclosures. No explosion hazard will occur. 

Explosion Data sensitive to impact:        Rate of burning:   Explosive Power:
   N/A                                         N/A               N/A

Sensitivity to Static Change:
   N/A
 

                           SECTION 5 -  REACTIVITY DATA

 
Chemical Stability:  Yes   If NO, under what conditions?  No N/A information 
found. 

Incompatibility to other substances?: Yes __    No __ If so which ones?  N/A

Reactivity and under what conditions: Polymerization will not occur

Hazardous Decomposition Products: Dust use, dust and fumes are generated, 
generally more from material being ground. 
 

                 SECTION 6 -  TOXICOLOGICAL PROPERTIES OF PRODUCT

 
Route of Entry:    Skin contact __      Skin Absorption __      Eye Contact _X
          Inhalation acute X fumes/dust during use abrasion
          Inhalation Chronic X fumes/dust during use abrasion
          Ingestion __ N/A

Effects of Acute Exposure to Product: Nuisance dust, resirable - 5m3 total - 15 
m3,  may irritate eyes, elevated sound level during use on some metal/jobs. 
Effects of Chronic Exposure to Product: Could cause coughing and shortness of 
breath due to dust, may affect breathing, may cause abrasion on skin, dust may 
irritate eyes. 

Sensitization to Product:   Synergistic Materials:      Irritancy of Product:
    N/A                          N/A                            N/A

Exposure limits to Products:
   N/A

Carcinogen city;   Reproductive Effects:         Tertongenicity:       Mutagenicity:
   N/A                 N/A                             N/A                     N/A
 

                         SECTION 7 -  PREVENTIVE MEASURES

 
Personal Protective Equipment:

Gloves; As desired by user   Respiratory;  N/A   Eye:  None   Footwear; None

Clothing (Specify): N/A   Other (Specify):  N/A

Engineering Controls (eg ventilation): Handle with adequate ventilation. See 
OSHA 29CFR1910.94 (Ventilation) and OSHA 29CFR1910.1000 (air Contaminates)

Leak and Spill Procedures:  Normal clean up procedures. 

Waste Disposal: Standard landfill methods consistent with Federal, Provincial 
and local laws. 

Handling Procedures and Equipment: OSHA 29cC FR 1910.94 (ventilation) and OSHA
29c FR 1910.1000 (air contaminates). 

Storage Requirements: Store away from heat source. Ideally at 35%-50% RH and 
60-70 deg. F with ventilation.

Special Shipping Information: N/A
 

                          SECTION 8 - FIRST AID MEASURES

 
Skin:        None

Eye:        Dust may irritate eyes. Wash with water: Obtain first aid.
      Wash with large amounts of water. Obtain first aid or medical assistance
      if needed. 

Inhalation:   REMOVE to fresh air. Obtain First aid or Medical assistance if 
needed. 

Ingestion:   No known adverse effects, but ingestion not recommended.
      Obtain First Aid or Medical assistance if needed. 

Other Potential Health Risks & General Advise: During use on some materials 
elevated sound levels may be created which affect hearing. Obtain First Aid or
medical assistance if needed. 
 

                    SECTION 9 -  PREPARATION DATE OF M.S.D.S.

 
ADDITIONAL INFORMATION COMMENTS.  The information contained herein is based on 
data considered accurate. However, no warranty is expressed or implied regarding 
the accuracy of this data or the results to be obtained from the use thereof. 
Vendor assumes no responsibility for injury to vendee third person approximately 
caused by the material if reasonable safety procedures are not adhered to as 
stipulated in the data sheet. Additionally, vendor assumes no responsibility for 
injury to vendee or third persons proximately caused by abnormal use of the 
material even if reasonable safety
procedures are followed. Furthermore, vendee assumes all risks in the use of 
this material. 

Sources Used:  MSDS information from original supplier.
      ACGIH booklet for TLV.
Prepared by:            Phone number: 603-532-4434
Key:  NAIF=No applicable information found
N/A=Not applicable

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.