Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 71259 -- [Back] | |||
|
MSDS 71259 71259: Blue Scotch Lock 18-14GA [100]71259-1: Yellow Scotch Lock 12-10GA [100] 71260-1: Black Scotch Lock 18-14GA [100] 71358: Red T-Tap [100] 71359: Blue T-Tap [100] 71365: Yellow T-Tap [100] MSDS Last updated: 03/08/2010
K.S. TERMINALS INC
MATERIAL SAFETY DATA SHEET
1. PRODUCT AND COMPANY IDENIFICATION
Product Name: PP-INSULATED QUICK CONNECTORS
Company Name: K.S. Terminals INC.
Company Address: 8, E. 3rd ROAD, CHANG PIN IND. PARK, HSEIN CHANG HWA,
TAIWAN.
Company Phone: TEL: 886-47580001 FAX: 886-47580003
Revised: 2010/01/29
2. COMPOSITION / INFORMATION ON INGREDIENTS:
2.1 BRASS (Copper & Zinc)
CAS No: 7440-50-8 & 7440-66-6
Chemical Components: Cu: 6.5~71.5% CAS No: 7440-50-8)
Zn: Margin (CAS No: 7440-66-6)
2.2 Tin Plated
CAS No: 7440-31-5
Chemical Compounds: TIN (SN): 99.9%
LEAD (PB): 0.01%
2.3.1 Polypropylene Homopolymer (PP)
CAS No: 9003-07-0
Chemical Components: 95%
2.3.2 Stabilizers (Trade Secret) : 5%
3. HAZARDS IDENTIFICATION
3.1 Endanger the effect the most importantly
POTENTIAL HEALTH EFFECTS: There is not any danger on the solid.
Environmental Impact: No
Physics and chemistry
danger:
Endanger Especially: No
3.1.2 Main Symptom: No
3.1.3 Articles are endangered and classified: No
4. FIRST AID MEASURES
4.1. Expose the way first aid method differently
Eyes Contact: Do not need
Skin Contact: Do not need
Ingestions: Do not need
The most important symptom and No
danger effect:
Shelter to the first-aid personnel: Do not need
Suggestions to the Doctor: Do not need
5. FIRE FIGHTING METHODS
Extinguishing Media: For localized power fires, smother with dry sand,
dry dolomite, sodium chloride of soda ash. Use fire-extinguishing media
appropriate to fight surrounding fire.
6. ACCIDENTAL RELEASE MEASURES:
Individual is in conformity Solid material is not suitable.
with the precautions:
Environmental Precautions; Solid material is not suitable.
Clear up the method: Will let out the end son and pack the
container into, in order to prevent
personnel from slipping.
7. HANDLING AND STORAGE
Handle: This product does not belong to the dangerous wastes, can trust
the retrieving trader to give reclaiming to deal with when must abandon.
Store:
1. Putting will ventilate the good indoor place to the dryness.
2. Forbid expose on outdoors or warn humidity high airtight space,
avoid with sour, soda, saline material store together.
3. Keep away from heat source, spark, and flame.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Project is No
controlled:
Biological Index: No
Personal Safeguard: No
9. PHYSICAL AND CHEMICAL PROPERTIES
Brass Sn PP
Appearance Solid Solid Solid
Melting Point 954 C 231 C >150 C
Boiling Point 2595 C 2875 C -
Specific Gravity 8.53 7.3 0.88 - 0.92
10. STABILITY AND REACTIVITY
10.1 Is Quite stable under the general environment, the
Stable: activation is little possible danger reacts under.
10.2 Special States: No
10.3 States that should be Contact Sour, soda and salt
avoided:
10.4 Endangers and resolves No
things:
11. TOXICOLOGICAL INFORMATINO
11.1 Urgent toxicity: No
11.2 Some effects: No
11.3 Causes the sensitiveness: No
11.4 Slow toxicity or long-term No
toxicity:
11.5 Special effects: No
12. ECOLOGICAL INFORMATION:
12.1 Possible environmental impact / the environment
This product is unable to be resolved by the living beings, but can pass
proper way and retrieve.
13 DISPOSAL CONSIDERATIONS
This product is not a harmfulness offal, can trust the retrieving trader
to give reclaiming to deal with when must abandon.
14. TRANSPORT INFORMATION
While transporting a product, should pay attention to not exposing under
the sunshine directly, avoid touching with water directly.
15. REGULATORY INFORMATION
Suitable regulation: Usually have no regulation of a special decree.
16. OTHER INFORMATION
These data offered in good faith as typical values and not as product
specifications. NO warranty, either expressed or implied, is made. The
recommended industrial hygiene and safe handling procedures are believed
to be generally applicable. However, each user should review these
recommendations in the specific context of the intended use and
determine whether they are appropriate.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
