Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 71258 -- [Back] | |||
|
MSDS 71258 71258: Quick-Lock W/Nyk Gel [50]MSDS Last updated: 02/09/2010
IMPERIAL SUPPLIES LLC MSDS SHEET FOR 71258 | |
Copyright, 2009, 3M Company. All rights reserved. Copying and/or downloading
of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from 3M, and (2) neither the copy
nor the original is resold or otherwise distributed with the intention of
earning a profit thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SCOTCHLOK CONNECTORS: 314 AND 316 (EG-3 SEALANT)
MANUFACTURER: 3M
DIVISION: Electrical Markets Division
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 05/18/09
Supercedes Date: 02/24/09
Document Group: 06-1417-2
Product Use:
Intended Use: Electrical
Specific Use: LOW VOLTAGE AUTOMOTIVE WIRE CONNECTOR WITH SEALANT
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
SOLID CONNECTOR Mixture 75 - 85
WHITE MINERAL OIL 8042-47-5 1 - 10
DIMETHYL SILOXANE, REACTION PRODUCT WITH SILICA 67762-90-7 1 - 10
POLYBUTYLENE 9003-29-6 1 - 10
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Viscous Sealant
Odor, Color, Grade: LIGHT COLORED GREASE, SLIGHT AROMATIC ODOR, BLACK OR BLUE
CAP
General Physical Form: Solid Connector
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.
Skin No health effects are expected.
Contact:
Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and
throat pain.
Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal
pain, stomach upset, nausea, vomiting and diarrhea.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that
appropriate personal and industrial hygiene practices are followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms
persist, get medical attention.
Skin No need for first aid is anticipated.
Contact:
Inhalation: Remove person to fresh air. If signs/symptoms develop, get
medical attention.
If Do not induce vomiting unless instructed to do so by medical
Swallowed: personnel. Give victim two glasses of water. Never give anything
by mouth to an unconscious person. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Autoignition temperature No Data Available
Flash Point >=300 ºF [Test Method: Tagliabue Closed Cup]
Flammable Limits - LEL No Data Available
Flammable Limits - UEL No Data Available
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A
extinguishing agents (e.g., water, foam).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Wear full protective equipment (Bunker Gear) and
Procedures: a self-contained breathing apparatus (SCBA).
Unusual Fire and Explosion Not applicable.
Hazards:
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Not applicable.
In the event of a release of this material, the user should determine if the
release qualifies as reportable according to local, state, and federal
regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid prolonged or repeated skin contact. Do not eat, drink or smoke when
using this product. Wash exposed areas thoroughly with soap and water. For
industrial or professional use only.
7.2 STORAGE
Store away from oxidizing agents.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use in a well-ventilated area.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection Avoid eye contact.
The following eye protection(s) are recommended:
Safety Glasses with side shields.
8.2.2 Skin Protection Gloves are not required.
8.2.3 Respiratory Under normal use conditions, airborne exposures
Protection are not expected to be significant enough to
require respiratory protection.
8.2.4 Prevention of Do not eat, drink or smoke when using this
Swallowing product. Wash exposed areas thoroughly with soap
and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional
Informatio
n
DIMETHYL SILOXANE, REACTION CMRG CEIL 5 mg/m3
PRODUCT WITH SILICA
OIL MIST, MINERAL ACGIH TWA, as 5 mg/m3
mist
OIL MIST, MINERAL ACGIH STEL, as 10 mg/m3
mist
OIL MIST, MINERAL OSHA TWA, as 5 mg/m3 Table Z-1
mist
WHITE MINERAL OIL CMRG TWA 5 mg/m3
WHITE MINERAL OIL CMRG STEL 10 mg/m3
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental
Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form: Viscous Sealant
Odor, Color, Grade: LIGHT COLORED GREASE, SLIGHT AROMATIC ODOR,
BLACK OR BLUE CAP
General Physical Form: Solid Connector
Autoignition temperature No Data Available
Flash Point >=300 ºF [Test Tagliabue Closed Cup]
Method:
Flammable Limits - LEL No Data Available
Flammable Limits - UEL No Data Available
Boiling point No Data Available
Density No Data Available
Vapor Density No Data Available
Vapor Pressure No Data Available
Specific Gravity 0.91 [Ref Std: WATER=1] [Details: (Sealant)]
pH Not Applicable
Melting point No Data Available
Solubility in Water Nil
Evaporation rate No Data Available
Volatile Organic Compounds No Data Available
Percent volatile No Data Available
VOC Less H2O & Exempt No Data Available
Solvents
Viscosity No Data Available
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to None known
Avoid:
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition: Carbon dioxide and carbon monoxide and
unidentified hydrocarbons.
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for
Toxicological Information on this material and/or its components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of waste product in a permitted hazardous
waste facility.
EPA Hazardous Waste Number D008 (Lead)
(RCRA):
Since regulations vary, consult applicable regulations or authorities before
disposal.
SECTION 14:TRANSPORT INFORMATION
ID Number(s):
80-6102-5366-0, 80-6102-5367-8, 80-6107-3453-7
Please contact the emergency numbers listed on the first page of the MSDS for
Transportation Information for this material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard
- Yes Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical
notification requirements of TSCA.
Contact 3M for more information.
Additional Information: (1) New Jersey Trade Secret Registry No.
04499600-5114P
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 1 Flammability: 1 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for
use by emergency response personnel to address the hazards that are presented
by short-term, acute exposure to a material under conditions of fire, spill,
or similar emergencies. Hazard ratings are primarily based on the inherent
physical and toxic properties of the material but also include the toxic
properties of combustion or decomposition products that are known to be
generated in significant quantities.
Revision Changes:
Section 15: Inventories information was modified.
Section 2: Ingredient table was modified.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is
believed to be correct as of the date issued. 3M MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE
OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user's method of use or
application. Given the variety of factors that can affect the use and
application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular
purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due
to the remote possibility that electronic transfer may have resulted in
errors, omissions or alterations in this information, 3M makes no
representations as to its completeness or accuracy. In addition, information
obtained from a database may not be as current as the information in the MSDS
available directly from 3M.
3M MSDSs are available at www.3M.com
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
