MSDS 71256

MATERIAL SAFETY           3M
DATA SHEET                3M CENTER
                            St. Paul, Minnesota
                            55144-1000
                            1-800-364-3577 or (651) 737-6501  (24 hours)
 
Copyright, 1998, Minnesota Mining and Manufacturing Company
All rights reserved. Copying and/or downloading of this information for the 
purpose of properly utilizing 3M products is allowed provided that:
1) the information is copied in full with no changes unless prior agreement is
obtained from 3M, and 
2) neither the copy nor the original is resold or otherwise distributed with the
intention of earning a profit thereon. 
 
DIVISION;  ELECTRICAL PRODUCTS DIVISION

TRADE NAME:
5087 INSULATING GREASE (804 CONNECTOR)

ID NUMBER/U.P.C.:
80-6105-9660-5   00-54007-06134-2   80-6105-9661-3   00-54007-06135-9
80-6107-3140-0   00-54007-50187-9   80-6107-3141-8   00-54007-50188-6

ISSUED;  February 04, 1998

SUPERSEDES;  September 13, 1995   

DOCUMENT; 11-4653-9
 
Imperial part #71256
 

1.  INGREDIENT                      C.A.S. NO.           PERCENT

 
White Mineral Oil (Petroleum)      8042-47-5             50.0   -   65.0
Polybutylene                         9003-29-6             25.0   -   40.0
Silane Treated Silica                68611-44-9           5.0   -   10.0
Hydrocarbon Polymer                  68648-89-5           1.0   -     5.0
   

2.  PHYSICAL DATA   

 
Boiling Point               N/A
Vapor Pressure            N/A
Vapor Density               N/A
Evaporation Rate         N/A
Solubility in Water      Nil
Specific Gravity         ca. 1.000 Water=1
Percent Volatile         N/D
pH                          N/A
Viscosity                    N/D
Melting Point               N/D
 
Appearance And Odor:
Gel, amber, mild odor
 
Abbreviations: N/D - Not Determined
      N/A -  Not Applicable
      CA -   Approximately
 

3.  FIRE AND EXPLOSION HAZARD DATA

 
Flash Point:         > 300.00  F  TCC
Flammable Limits - LEL:   N/D
Flammable Limits - UEL:   N/D
Autoignition Temperature:   N/D
 
Extinguishing Media:
Carbon dioxide, Dry chemical, Foam
 
Special Fire Fighting Procedures:
Wear full protective clothing, including helmet, self-contained, positive 
pressure or pressure demand breathing apparatus, bunker coat and pants, bands 
around arms, waist and legs, face mask, and protective covering for exposed 
areas of the head. 
 
Unusual Fire and Explosion Hazards;
None known.
 
NFPA Hazard Codes:   Health: 1   Fire:  1      Reactivity;   0
         Unusual Reaction Hazard:  none
 
OSHA Fire Hazard Class:  Class 111B Combustible Liquid
 

4.  REACTIVITY DATA

 
STABILITY;  Stable
INCOMPATIBILITY - Materials/Conditions To Avoid:
Strong Oxidizing Agents.
 
Hazardous Polymerization:  Hazardous polymerization will not occur. 
 
Hazardous Decomposition Products;
Carbon Monoxide and Carbon Dioxide, Hydrogen Chloride, Hydrocarbons.

 
5.  ENVIRONMENTAL INFORMATION

 
SPILL RESPONSE;
Observe precautions from other sections. Collect spilled material. 
Clean up residue with an appropriate organic solvent. Read and follow safety 
precautions on the solvent label and MSDS. Place in an approved metal container.
 
RECOMMENDED DISPOSAL;
Dispose of waste product in a sanitary landfill.
 
ENVIRONMENTAL DATA;
Not determined.
 
REGULATORY INFORMATION
Volatile Organic compounds;  N/D
VOC Less H2O & Exempt Solvents:  N/D..
 
Since regulations vary, consult applicable regulations or authorities before 
disposal. U.S. EPA Hazardous Waste Number = None (Not U.S. EPA Hazardous).
 
EPCRA HAZARD CLASS;
FIRE HAZARD;  No   
PRESSURE; No
REACTIVITY; No
ACUTE;  No
CHRONIC; No

 
6.  SUGGESTED FIRST AID

 
EYE CONTACT; 
Immediately flush eyes with large amounts of water for at least 15 minutes. Get 
immediate medical attention.
 
SKIN CONTACT;
Wash affected area with soap and water.
 
INHALATION;
If signs/symptoms occur, remove person to fresh air. If signs/symptoms continue, 
call a physician. 
 
IF SWALLOWED;
Do not induce vomiting. Drink two glasses of water. Call a physician.

 
7.  PRECAUTIONARY INFORMATION

 
EYE PROTECTION;
Avoid eye contact.
 
SKIN PROTECTION;
Avoid prolonged or repeated skin contact.
 
RECOMMENDED VENTILATION;
Not applicable.
 
RESPIRATORY PROTECTION;
Not applicable.
 
PREVENTION OF ACCIDENTAL INGESTION;
Wash hands after handling and before eating. Do not ingest. 
 
RECOMMENDED STORAGE;
Keep out of the reach of children.
 
FIRE AND EXPLOSION AVOIDANCE;
Keep container tightly closed.
 
            EXPOSURE LIMITS
 
INGREDIENT                       VALUE   UNIT        TYPE     AUTH    SKIN*
--------------------------------------------------------------------------------
White Mineral Oil (Petroleum)   5                  MG/M3    TWA     CMRG
White Mineral Oil (Petroleum)   10                 MG/M3    STEL    CMRG
Polybutylene                      None              None     None    None
Silane Treated Silica             None               None       None    None
Hydrocarbon Polymer               None               None     None    None
 
*Skin Notation:  Listed substances indicated with "Y" under SKIN refer to the 
potential contribution to the overall exposure by the cutaneous route including 
mucous membrane and eye, either by airborne or, more particularly, by direct 
contact with the substance. Vehicles can alter skin absorption.
 
SOURCE OF EXPOSURE LIMIT DATA;
-   -         CMRG;  Chemical Manufacturer Recommended Exposure Guidelines
-   -         NONE:   None Established
 

8.  HEALTH HAZARD DATA

 
EYE CONTACT;
Mild Eye Irritation;  signs/symptoms can include redness, swelling, pain, and 
tearing.
 
SKIN CONTACT;
Mild Skin Irritation  (after prolonged or repeated contact):
Signs/symptoms can include redness, swelling, and itching.
 
INHALATION;
No adverse health effects are expected from inhalation exposure. 
 
IF SWALLOWED;
Swallowing a relatively large amount of this material is unlikely to produce 
serious illness or death. 
 
May produce cathartic action on digestive system. 
 
SECTION CHANGE DATES
 
HEADING       SECTION CHANGES SINCE  September 13,  1995  ISSUE
 
The information in this Material Safety Data Sheet (MSDS) is believed to be 
correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE.  
User is responsible for determining whether the 3M product if fit for a 
particular purpose and suitable for user's method of use or application. Given 
the variety of factors that can affect the use and application of a 3M product, 
some of which are uniquely within the user's knowledge and control, it is 
essential that the user evaluate the 3M product to determine whether it is fit 
for a particular purpose and suitable for user's method of use or application. 
 
3M provides information  in electronic form as a service to its customers. Due 
to the remote possibility that electronic transfer may have resulted in errors, 
omissions or alterations in this information, 3M makes no representations as to 
its completeness or accuracy. In addition, information obtained from a database 
may not be as current as the information in the MSDS available directly from 3M

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.