Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 71239 -- [Back] | |||
|
MSDS 71239 71239: Piggy Back Non-Insulated 16-14 [50]71810: Dual Male/Feml Adptr [100] MSDS Last updated: 03/23/2010
IMPERIAL SUPPLIES LLC MSDS SHEET FOR 71239 & 71810
K.S. TERMINALS INC.
Section 1. Product and Company Identification
Product Name: NON-INSULATED CONNECTORS (BRASS)
Company Name: K.S. TERMINALS INC.
Company Address: 8, E. 3rd Road, Chang Pin Ind. Park,
Hsien Shi Chang Hwa, Taiwan
Company Phone: 886-47580001
Fax: 886-47580003
Revised: 2009/2/5
Section 2 Composition/information on Ingredients
Brass (Copper & Zinc)
CAS No. 7440-50-8 & 7440-66-6
Chemical Components: Cu: 68.5~71.5% (CAS No. 7740-50-8)
Zn: Margin ( CAS No. 7440-66-6)
Section 3. Hazardous Identification
3.1 Endanger effect the most importantly
(1) POTENTIAL HEALTH EFFECTS: There is not any danger on the solid.
(2) Environmental Impact: No.
(3)Physics and Chemistry Danger:
(4) Endanger specially: No.
3.1.2 Main Symptom: No.
3.1.3 Articles are endangered and No.
classified:
Section 4. First Aid Measures:
1. Expose the way first aid method differently:
Eye Contact: Do not need.
Skin Contact: Do not need.
Ingestion: Do not need.
2. The most important symptom and No.
danger effect:
3. Shelter to the first aid personnel: Do not need.
4. Suggestion to Doctor: Do not need.
Section 5. Fire Fighting Measures
Extinguishing Media: For localized power fires, smother
with dry sand, dry dolomite, Sodium
chloride of soda ash. Use fire
extinguishing media appropriate to
fight surrounding fire.
Section 6. Accidental Release Measures:
Individual is in conformity with the Solid material is not suitable.
precautions:
Environmental precautions: Solid material is not suitable.
Clear up the method: Will let out the end son and pack the
container into, in order to prevent
personnel from slipping.
Section 7. Handling and Storage
Handle: This product does not belong to the
dangerous wastes, can trust retrieving
trader to give reclaiming to deal with
when must abandon.
Store: 1. Putting will ventilate the good
indoor place to the dryness.
2. Forbid expose on outdoors or warm
humidity high airtight space, avoid
with sour, soda, saline material store
together.
3. Keep away from heat source, spark,
and flame.
Section 8. Exposure controls/Personal Protection.
Project is controlled: No
Biological index: No
Personal Safeguard: No
Section 9. Physical and Chemical Properties.
Brass
Appearance: Solid
Melting Point: 954 C
Boling Point: 2595 C
Specific Gravity: 8.53
Section 10. Stability and Reactivity
10.1 Is stable: Quite stable under the general
environment, the activation is little
possible danger reacts under.
10.2 Special States: No
10.3 States that should be avoided: Contact sour, soda and salt.
10.4 Endangers and resolves things: No
Section 11. Toxicological Information
11.1 Urgent toxicity: No
11.2 Some effects: No
11.3 Causes the sensitiveness No
11.4 Slow toxicity or long term No
toxicity:
11.5 Special effects: No
Section 12. Ecological Information
12.1 Possible environment impact/the This product is unable to be resolved
environment: by the living beings, but can pass
proper way and retrieve.
Section 13. Disposal Considerations
This product is not harmfulness offal, can trust retrieving trader to give
reclaiming to deal with when must abandon.
Section 14. Transport Information
While transporting a product, should pay attention to not exposing under the
sunshine directly, avoid touching with water directly.
Section 15. Regulatory Information
Suitable Regulation: Usually have no regulation of a
specific degree
Section 16. Other Information
This data is offered in good faith as typical values and not as product
specifications. No warranty, either expressed or implied, is made. The
recommended industrial hygiene and safe handling procedures are believed to be
generally applicable. However, each user should review these recommendations
in the specific context of the intended use and determination whether they are
appropriate.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
