Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 71150 -- [Back] | |||
|
MSDS 71150 71150: Sealed Red 4-6 Ring [50]71151: Sealed Red 8-10 Ring [50] 71152: Sealed Red 12-1/4 Ring [50] 71153: Sealed Red 5/16-3/8 Ring [50] 71154: Sealed Blue 4-6 Ring [50] 71155: Sealed Blue 8-10 Ring [50] 71156: Sealed Blue 12-1/4" Ring [50] 71157: Sealed Blue 5/16-3/8 Ring [50] 71158: Sealed Yellow 8-10 Ring [50] 71159: Sealed Yellow 12-1/4 [50] 71160: Sealed Yellow 1/4-5/16 [50] 71161: Sealed Yellow 5/16-3/8 [50] 71168: Sealed Yellow 7/16-1/2 [50] 71170: Sealed Blue #6 Spade [50] 71171: Sealed Blue #8 Spade [50] 71172: Sealed Blue #10 Spade [50] 71175: Sealed Yel #6 Spade [50] 71176: Sealed Yel #8 Spade [50] 71177: Sealed Yel #10 Spade [50] 71183: Sealed Red #6 Spade [50] MSDS Last updated: 03/09/2010
K.S. TERMINALS INC.
MATERIAL SAFETY DATA SHEET No. MSDS-025
Page: 1-3
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: HEAT SHRINKABLE TERMINALS
Company name: K.S. TERMINALS INC.
Company address: 8, E. 3rd ROAD, CHANG PIN IND.
PARK, HSIEN SHI CHANG HWA, TAIWAN
Company Phone: TEL: 886-47580001
FAX: 886-47580003
Revised: 2010/02/08
2. COMPOSITION/INFORMATION ON INGREDIENTS
2.1 COPPER (Cu)
CAS NO: 7440-50-8
Chemical components: Cu: 99.9% (CAS No. 7440-50-8)
P: 0.015%-0.04% (CAS No. 7723-14-0)
2.2 Tin Plated
CAS No: 7440-31-5
Chemical components: TIN SN: 99.9%
LEAD (PB): 0.01%
2.3 Polyolefin (PE)
Chemical components: 95-100%
3. HAZARDS IDENTIFICATION
3.1 Endanger the effect the most
importantly
(1) POTENTIAL HELATH EFFECTS: There is not any danger on the
solid.
(2) Environmental impact: No
(3) Physics and chemistry danger:
(4) Endanger specially: No
3.1.2 Main symptom: No
3.1.3 Articles are endangered and No
classified:
4. FIRST AID MEASURES
1. Expose the way first aid method
differently:
(1) Eyes contact: Do not need.
(2) Skin contact: Do not need.
(3) Ingestion: Do not need.
2. The most important symptom and No
danger effect:
3. Shelter to the first-aid Do not need
personnel:
4. Suggestion to the doctor: Do not need
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: For localized power fires, smother
with dry sand, dry dolomite, Sodium
chloride of soda ash. Use
fire-extinguishing media
appropriate to fight surrounding
fire.
6. ACCIDENTAL RELEASE MEASURES
Individual is in conformity with Solid material is not suitable
the precautions:
Environmental precautions: Solid material is not suitable
Clear up the method: Will let out the end son and pack
the container into, in order to
prevent personnel from slipping.
7. HANDLING AND STORAGE
Handle: This product does not belong to the
dangerous wastes, can trust the
retrieving trader to give
reclaiming to deal with when must
abandon.
Store:
1. Putting will ventilate the good indoor place to the dryness.
2. Forbid expose on outdoors or warm humidity high airtight space, avoid
with sour, soda, saline material store together.
3. Keep away from heat source, spark, flame.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
1, Project is controlled: No
2, Biological index: No
3, Personal safeguard: No
9. PHYSICAL AND CHEMICAL PROPERTIES
Sn PE Copper
Appearance Solid Solid Solid
Melting point 231 C 140 C 1083 C
Boiling point 2875 C - 2595 C
Specific 7.3 >1.0 8.94
gravity
10. STABILITY AND REACTIVITY
10.1 Is stable: Quite stable under the general
environment, the activation is
little possible danger reacts
under.
10.2 Special states: No
10.3 States that should be avoided: Contact sour, soda and salt
10.4 Endangers and resolves things: No
11. TOXICOLOGICAL INFORMATION
11.1 Urgent toxicity: No
11.2 Some effects: No
11.3 Causes the sensitiveness: No
11.4 Slow toxicity or long-term No
toxicity:
11.5 Special effects: No
12. ECOLOGICAL INFORMATION
12.1 possible environmental impact/the environment.
This product is unable to be resolved by the living beings, but can pass
proper way and retrieve.
13. DISPOSAL CONSIDERATIONS
This product is not a harmfulness offal, can trust the retrieving trader
to give reclaiming to deal with when must abandon.
14. TRANSPORT INFORMATION
While transporting a product, should pay attention to not exposing under
the sunshine directly, avoid touching with water directly.
15. REGULATORY INFORMATION
Suitable regulation: Usually have no regulation of a
specific decree.
16. OTHER INFORMATION
These data are offered in good faith as typical values and not as
product specifications. No warranty, either expressed or implied, is
made. The recommended industrial hygiene and safe handling procedures
are believed to be generally applicable. However, each user should
review these recommendations in the specific context of the intended use
and determine whether they are appropriate.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
