MSDS 9502

Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: 813-248-0585

                     Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name:      IMPERIAL 9502 HEAVY DUTY THREADLOCKER PERMANENT 36ML
Item No:           12413
Product Type:      Anaerobic

2. COMPOSITION/INFORMATION ON INGREDIENTS
Component                   Weight%          ACGIH TLV: TWA       OSHA PEL:
                           
POLYGLYCOL DIMETHACRYLATE    60-80           Not Listed           Not Listed
25852-47-5
                       
POLYESTER RESIN              20-40            Not Listed          Not Listed
MIXTURE
                        
DIMETHYLBENZYL                 <3             Not Listed          Not Listed
HYDROPEROXIDE
80-15-9
                                       
SACCHARIN                  0.5-2.0        10mg/m3 nuisance dust   Not Listed
81-07-2


3. HAZARDS IDENTIFICATION
Toxicity:       At elevated temperatures may cause irritation of the      
                respiratory tract. Irritates mucous membranes.
                Ingestion may irritate digestive tract and cause nausea,  
                vomiting and diarrhea. High concentrations may
                cause central nervous system (CNS) depression. May cause  
                eye and skin irritation. May cause skin
                sensitization. Note: This product does not contain
                microcyrstalline silica.
Primary Routes of Entry:   Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure:  Repeated skin contact may cause allergic skin  
                    reactions. Skin redness. Ingestion may cause nausea and
                    vomiting. Inhalation overexposure may cause irritation,   
                    coughing and flu-like symptoms. May cause pain,
                    redness or swelling of the eyes and excessive blinking    
                    and tear production.

Component      Weight%        NTP                  ACGIH             IARC
                                                Carcinogens
SACCHARIN      0.5-2.0    Delisted April 2000                       Group 3:    
81-07-2                                                             Vol 73, 
                                                                    Page 517:
                                                                    1999

Medical Conditions Recognized as    Preexisting skin disorders
Being Aggravated by Exposure:

4. FIRST AID MEASURES
Ingestion:       If swallowed, DO NOT induce vomiting. Keep individual calm.    
                 Obtain medical attention.
Inhalation:      Move to fresh air in case of accidental inhalation of vapours. 
                 Obtain medical attention.
Skin Contact:    Wash off with soap and water. If skin irritation persists,
                 call a physician.
Eye Contact:     In case of contact, immediately flush eyes with plenty of
                 water for at least 15 minutes and get medical
                 attention if irritation persists.

5. FIRE FIGHTING MEASURES                                       
Flash Point (°F/C):                >200 degrees C
Recommended Extinguishing Media:   Dry chemical, Carbon dioxide, foam
Special Fire-Fighting Procedures:  Firefighters should wear self-contained      
                                   breathing apparatus. Water spray             
                                   may be ineffective on flames but should
                                   be used to keep fire-exposed containers cool.
Hazardous Products of Combustion:  Oxides of carbon
Unusual Fire/Explosion Hazards:    Closed containers may rupture or explode
                                   when exposed to extreme heat.
                                   May polymerize exothermically.

                                     
Lower Explosive Limit:             Not determined
Upper Explosive Limit:             Not determined
                                                                       
         
6. ACCIDENTAL RELEASE MEASURES
Spill Procedures:  Maintain good ventilation. Take up with an inert absorbent.
                   Store in a closed waste container until disposal.            
       

7. HANDLING AND STORAGE
Storage:           Store away from heat. Store away from water or moisture.
                   Protect from contamination. Keep containers                  
                   tightly closed in a cool, well-ventilated place.
Handling:          Avoid prolonged skin contact. Keep away from eyes.


8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Eyes:             Safety glasses
Skin:             Rubber or plastic gloves.
Ventilation:      General; local exhaust ventilation as necessary to control
                  any air contaminants to within their exposure
                  limits (or to the lowest feasible levels when limits have
                  not been established) during the use of this
                  product.
Respiratory Protection:  An approved respirator (i.e. NIOSH, etc.) should be    
                  worn when exposures are expected to exceed the
                  applicable limits.


9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:              Red liquid
Odor:                    MILD
Boiling Point:           > 150 degrees C
pH:                      Does not apply                  
Solubility in Water:     Insoluble                  
Specific Gravity:        1.1
VOC Content(Wt.%):       <2% by weight
Vapor Pressure:          Not determined
Vapor Density (Air=1):   Heavier than air
Evaporation Rate:        Not Determined

10. STABILITY AND REACTIVITY
Chemical Stability:         Stable at normal conditions.
Hazardous Polymerization:   Will not occur
Incompatabilities:          Strong oxidizers, free radical initiators,
                            inert gases. Peroxides, Reducing agents.
                            Oxygen scavengers.
Conditions to Avoid         Heat
Hazardous Products of Combustion: Oxides of carbon

11. TOXICOLOGICAL INFORMATION
 See Section 3

12. ECOLOGICAL INFORMATION
No data available

13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with
federal, state and local regulations.
US EPA Waste Number:   NH - Not a RCRA Hazardous Waste Material

14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Domestic Ground Transport
      DOT Shipping Name:     Unrestricted
      Hazard Class:          None
      UN/ID Number:          None
      Marine Pollutant:      None

IATA
      Proper Shipping Name:  Not regulated
      Class or Division:     None
      UN/NA Number:          None
        

IMDG
      Proper Shipping:       Unrestricted
      Hazard Class:          None
      UN Number:             None

15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313
Toxic Chemical.

DIMETHYLBENZYL HYDROPEROXIDE

CALIFORNIA PROP 65:
No California Prop 65 chemicals are known to be present at or above the No
Significant Risk Level.

TSCA Inventory Status:
Listed on Inventory: YES All components of this product are listed (or exempt)
on the EPA TSCA inventory.

16. OTHER INFORMATION
Estimated NFPA Rating:           HEALTH 2, FLAMMABILITY 1 , REACTIVITY 1
Estimated HMIS Classification:   HEALTH 2, FLAMMABILITY 1, PHYSICAL HAZARD 0
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.



Prepared By: Denise Boyd, Health and Safety Manger                              
           Revision Date: August/13/2007
Company:     Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 06106            
            Revision  1
             Number:

                            




                                

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.