Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 9113 -- [Back] | |||
|
MSDS 9113 9113: Disc Brake Quiet 4 Oz [12]MSDS Last updated: 01/14/2010
IMPERIAL SUPPLIES LLC MSDS SHEET FOR 9113
Section 1: Product & Company Identification
Product Name: Disc Brake Quiet
Product Number (s): 05015, 05016, 05115, 05116
Manufactured By:
CRC Industries, Inc. General Information (215) 674-4300
885 Louis Drive
Warminster, PA 18974
www.crcindustries.com
Technical Assistance (800) 521-3168
Customer Service (800) 272-4620
24-Hr Emergency (CHEMTREC) (800) 424-9300
Section 2: Hazards Identification
Emergency Overview
Appearance & Odor: Red paste, acrylic odor
As defined by OSHA's Hazard Communication Standard, this product is hazardous.
Potential Health Effects:
EYE: Direct contact with material may cause mild irritation, redness
and stinging.
SKIN: Prolonged or repeated contact may cause mild irritation and
redness of the skin.
INHALATION: Inhalation of vapor or mist can cause irritation to the
respiratory passages, headache, and nausea.
INGESTION: Swallowing this material may cause gastrointestinal discomfort.
CHRONIC EFFECTS: None known
TARGET ORGANS: None
Medical Conditions Aggravated by None known
Exposure:
See Section 11 for toxicology and carcinogenicity information on product
ingredients.
Section 3: Composition/Information on Ingredients
COMPONENT CAS NUMBER % by Wt.
Acrylic polymers proprietary blend 55 - 65
Water 7732-18-5 35 - 45
Ethylene glycol 107-21-1 1 - 3
Pigments 2814-77-9 / 3468-63-1 / 2786-76-7 < 1
Section 4: First Aid Measures
Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a
physician if irritation persists.
Skin Contact: Remove contaminated clothing and wash affected area with soap
and water. Call a physician if irritation persists. Wash
contaminated clothing prior to re-use.
Inhalation: Remove person to fresh air. Keep person calm. If not breathing,
give artificial respiration. If breathing is difficult give
oxygen. Call a physician.
Ingestion: Do not induce vomiting unless instructed by medical personnel.
If victim is conscious, give them a glass of water to drink.
Consult a physician for further instructions.
Note to Treat symptomatically.
Physicians:
Section 5: Fire-Fighting Measures
Flammable Properties: As defined by OSHA, this product is not
flammable.
Flash Point: None (TCC) Upper Explosive ND
Limit:
Autoignition ND Lower Explosive ND
Temperature: Limit:
Suitable Extinguishing As appropriate for surrounding fire.
Media:
Products of Combustion: Thermal decomposition may yield acrylic monomers.
Protection of Firefighters should wear self-contained,
Fire-Fighters: NIOSH-approved breathing apparatus for protection
against suffocation and possible toxic decomposition
products. Proper eye and skin protection should be
provided. Use water spray to keep fire-exposed
containers cool and to knock down vapors which may
result from product decomposition.
Section 6: Accidental Release Measures
Personal Use personal protection recommended in Section 8.
Precautions:
Environmental Take precautions to prevent contamination of ground and
Precautions: surface waters. Do not flush into sewers or storm
drains.
Methods for Dike area to contain spill. Material can create slippery
Containment & conditions. Ventilate the area with fresh air. If in
Clean-up: confined space or limited air circulation area, clean-up
workers should wear appropriate respiratory protection.
Recover or absorb spilled material using an absorbent
designed for chemical spills. Place used absorbents into
proper waste containers.
Section 7: Handling and Storage
Handling Avoid contact with eyes, skin, and clothing. Wash
Procedures: thoroughly after handling. Avoid breathing vapors.
Storage Store in a cool dry area out of direct sunlight. Keep
Procedures: containers closed when not in use. Keep product from
freezing. Product stability may be affected.
Aerosol Storage NA
Level:
Section 8: Exposure Controls/Personal Protection
Exposure Guidelines:
OSHA ACGIH OTHER
COMPONENT TWA STEL TWA STEL TWA SOURCE UNIT
Acrylic NE NE NE NE NE
polymers
Water NE NE NE NE NE
Ethylene glycol NE NE NE 100 (c) NE Mg/m3
Pigments NE NE NE NE NE
N.E. - Not Established (c) - ceiling (s) - skin (v) - vacated
Engineering Area should have ventilation to provide fresh air. Local
Controls: exhaust ventilation is generally preferred because it can
control the emissions of the contaminant at the source,
preventing dispersion into the general work area. Use
mechanical means if necessary to maintain vapor levels
below the exposure guidelines. If working in a confined
space, follow applicable OSHA regulations.
Respiratory None required for normal work where adequate ventilation
Protection: is provided. If engineering controls are not feasible or
if exposure exceeds the applicable exposure limits, use a
NIOSH-approved cartridge respirator with organic vapor and
particulate cartridge. Use a self-contained breathing
apparatus in confined spaces and for emergencies.
Eye/face For normal conditions, wear safety glasses. Where there is
Protection: reasonable probability of liquid contact, wear
splash-proof goggles.
Skin Protection: Use protective gloves such as neoprene or nitrile. Also,
use full protective clothing if there is prolonged or
repeated contact of liquid with skin.
Section 9: Physical and Chemical Properties
Physical State: Paste
Color: Red
Odor: Acrylic
Specific Gravity: 1.042
Initial Boiling Point: > 200 F
Freezing Point: ND
Vapor Pressure: ND
Vapor Density: ND (air = 1)
Evaporation Rate: < 1 (ether = 1)
Solubility: Dispersible in water
pH: NA
Volatile Organic Compounds: wt %: 0.7 g/L: 7.29 lbs./gal: 0.06
Section 10: Stability and Reactivity
Stability: Stable
Conditions to Avoid: Freezing temperatures
Incompatible Materials: None known
Hazardous Decomposition Thermal decomposition may yield acrylic
Products: monomers.
Possibility of Hazardous No
Reactions:
Section 11: Toxicological Information
Long-term toxicological studies have not been conducted for this product. The
following information is available for components of this product.
ACUTE EFFECTS
Component Test Result Route Species
Acrylic LD50 > 5000 mg/kg Oral Rat
polymers
Acrylic LD50 > 5000 mg/kg Dermal Rabbit
polymers
CHRONIC EFFECTS
Carcinogenicity:
Component Result
OSHA: None listed
IARC: None listed
NTP: None listed
Mutagenicity No information available
:
Other: None
Section 12: Ecological Information
Ecological studies have not been conducted for this product. The following
information is available for components of this product.
Ecotoxicity: No information available
Persistence / Degradability: No information available
Bioaccumulation / Accumulation: No information available
Mobility in Environment: No information available
Section 13: Disposal Considerations
Disposal: This product is not a RCRA hazardous waste. (See 40 CFR Part 261.20
- 261.33)
All disposal activities must comply with federal, state and local regulations.
Local regulations may be more stringent than state or national requirements.
Section 14: Transport Information
Proper shipping description:
US DOT (ground): Not Regulated
Special Provisions: None
Section 15: Regulatory Information
U.S. Federal
Toxic Substances Control Act (TSCA):
All ingredients are either listed on the TSCA inventory or are exempt.
Comprehensive Environmental Response, Compensation and Liability Act (CERCLA):
Reportable Quantities (RQ's) exist for the following ingredients: ethylene
glycol (5000 lbs)
Spills or releases resulting in the loss of any ingredient at or above its RQ
require immediate notification to the National Response Center (800-424-8802)
and to your Local Emergency Planning Committee.
Superfund Amendments Reauthorization Act (SARA) Title III:
Section 302 Extremely Hazardous Substances None
(EHS):
Section 311/312 Hazard Categories: Fire Hazard No
Reactive Hazard No
Release of Pressure No
Acute Health Hazard No
Chronic Health No
Hazard
Section 313 This product contains the following substances subject to the
Toxic Chemicals: reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372: ethylene glycol (2%)
Clean Air Act:
Section 112 Hazardous Air Pollutants ethylene glycol
(HAPs):
Consumer Product Safety Act General Conformity Certification: This product was
evaluated by CRC
Industries, Inc., and is certified to be in compliance with the provisions of
the Consumer Product Safety Act, the Federal Hazardous Substances Act and the
Poison Prevention Packaging Act, as applicable. This product was manufactured
at the location listed in Section 1 of this MSDS. The date of manufacture is
stamped on the product container. No testing is required to certify compliance
with the above
State Regulations
California Safe Drinking Water and Toxic Enforcement Act (Prop 65):
This product may contain the following D&C Orange #17 (3468-63-1); trace
chemicals known to the state of amounts of acrylonitrile, formaldehyde
California to cause cancer, birth and ethyl acrylate may also be present
defects or other reproductive harm:
State Right to Know:
New Jersey: 107-21-1
Pennsylvania: 107-21-1, 102-71-6
Massachusetts: 107-21-1
Rhode Island: 107-21-1, 102-71-6
Additional Regulatory Information: None
Section 16: Other Information
NFPA: Health: 1 Flammability: 0 Reactivity: 0
HMIS: Health: 1 Flammability: 0 Reactivity: 0 PPE: B
Prepared By: Michelle Rudnick
CRC #: 562A
Revision Date: 11/07/2008
Changes since last Section 15: CPSA Certification added
revision:
The information contained in this document applies to this specific material
as supplied. It may not be valid for this material if it is used in
combination with any other materials. This information is accurate to the best
of CRC Industries' knowledge or obtained from sources believed by CRC to be
accurate. Before using any product, read all warnings and directions on the
label.
CAS: Chemical Abstract Service NA: Not Applicable
ppm: Parts per Million ND: Not Determined
TCC: Tag Closed Cup NE: Not Established
PMCC: Pensky-Martens Closed Cup g/L: grams per Liter
PPE: Personal Protection Equipment lbs./gal: pounds per gallon
TWA: Time Weighted Average STEL: Short Term Exposure Limit
OSHA: Occupational Safety and Health Administration
ACGIH American Conference of Governmental Industrial Hygienists
NIOSH National Institute of Occupational Safety & Health
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
