MSDS 9105

Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106  USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: 813-348-0585
 
            
                            MATERIAL SAFETY DATA SHEET

 
                            1.  PRODUCT IDENTIFICATION

 
Product Name:   78E HYDRAULIC JACK OIL  1QT CN
Item No:      80054
Product Type;      Lubricant
 

                    2.  COMPOSITION/INFORMATION ON INGREDIENTS

 
Ingredients                   Percent      ACGIH 8 Hr. TWA:     OSHA 8 Hr. TWA:
--------------------------------------------------------------------------------
Distillates (Petroleum),   90-100      5mg/m3 mist            5mg/m3 mist
Hydrotreated Heavy
Naphthenic
64742-52-5
Polymethacrylate            1-10        Not Listed            Not Listed
Dispersion
Mixture
 

                            3.  HAZARDS IDENTIFICATION

 
Toxicity;      May cause eye, skin and respiratory irritation. Prolonged skin
         contact may result in dermatitis in sensitive individuals.
         Aspiration hazard if swallowed.

Primary Routes of
Entry:         Eye and skin contact, ingestion, inhalation.

Signs and Symptoms
Of Exposure:      Overexposure may cause eye and skin redness. Inhaling may
         cause mild irritation to the nose, throat and respiratory tract
         and may result in central nervous system (CNS) depression.   

Medical Conditions
Recognized as      Preexisting pulmonary and dermatological disorders
Being Aggravated
By Exposure:
 

                              4.  FIRST AID MEASURES

 
Ingestion:      If swallowed, DO NOT induce vomiting. Keep individual calm.
         Obtain medical attention.

Inhalation;      If inhaled, remove to fresh air. If not breathing give artificial
         respiration, preferably mouth-to-mouth. If breathing is difficult
         give oxygen. Get medical attention.

Skin Contact;      Remove contaminated clothing. Wash area with soap and water.
         If irritation persists, seek medical attention.

Eye Contact;      In case of contact, immediately flush eyes with plenty of water 
for at least 15 minutes and get medical attention if irritation persists.
 

                            5.  FIRE FIGHTING MEASURES

 
Flash Point (°F/C):         Greater than 200 degrees F.
Recommended Extinguishing Media:   Carbon Dioxide, Dry Chemicals, Foam.
Special Fire-Fighting Procedures;   Firefighters should wear self-contained 
breathing apparatus. 

Hazardous Products Formed
By Fire or Thermal         Carbon monoxide, Carbon dioxide.
Decomposition:

Unusual Fire/Explosion Hazards;   Closed containers may rupture or explode when
               exposed to extreme heat.
 
Lower Explosive Limit:      Not determined.
Upper Explosive Limit;      Not determined.
 

                         6.  ACCIDENTAL RELEASE MEASURES

 
Spill Procedures:         Maintain good ventilation. Take up with an inert
               absorbent. Store in a closed waste container until
               disposal. Residues may be cleaned up with soap    
               and water. 
 

                             7.  HANDLING AND STORAGE

 
Storage;            Store away from heat, sparks or open flame. Do not
               store at temperatures above 120 degrees F.

Handling:            Avoid prolonged skin contact. Keep away from 
               eyes. Do not inhale vapors. 
 

                    8.  EXPOSURE CONTROLS/PERSONAL PROTECTION

 
Eyes:            Safety glasses or goggles.
Skin:            Oil resistant neoprene or plastic gloves.
Ventilation;         General: local exhaust ventilation as necessary to 
            control any air contaminants to within their exposure
            limits during the use of this product.   
Respiratory Protection;   An approved respirator (i.e. NIOSH, etc.) should be
            worn when exposures are expected to exceed the
            applicable limits. 
 

                       9.  PHYSICAL AND CHEMICAL PROPERTIES

 
Appearance;          Amber liquid
Odor;            Mild petroleum odor.
Boiling Point (°F):      More than 500 degrees F.
pH:             Does not apply
Solubility in Water:      Nil
Specific Gravity;      0.905 @ 15 degrees C.
VOC Content (Wt.%):   21.6% by weight:  195 g/l
Vapor Pressure;      Less than 5 mm Hg
Vapor Density (Air=1):   Greater than 1
Evaporation Rate:      <1 (butyl acetate = 1)
 

                          10.  STABILITY AND REACTIVITY

 
Chemical Stability:      Stable at normal conditions
Hazardous Polymerization:   WILL NOT OCCUR
Incompatibilities:      Strong oxidizers.
Conditions to Avoid:      High temperatures.
Hazardous Products
Formed by Fire or Thermal
Decomposition;      Carbon monoxide, Carbon dioxide.
 

                          11.  TOXICOLOGICAL INFORMATION

 
See Section 3
 

                           12.  ECOLOGICAL INFORMATION

 
No data available
 

                           13.  DISPOSAL CONSIDERATIONS

 
Recommended Method of Disposal:  Disposal should be made in accordance with 
federal, state and local regulations
US EPA Waste Number;   NH - Not a RCRA Hazardous Waste Material
 

                         14.  TRANSPORTATION INFORMATION

 
DOT (49CFR 172)
 
Domestic Ground Transport
DOT Shipping Name:      Unrestricted
Hazard Class:         NONE
UN/ID Number:      None
Marine Pollutant:      None
 
IATA
Proper Shipping Name:   Unrestricted
Class or Division:      None
UN/NA Number;      None
 
IMDG
Proper Shipping:      Unrestricted
Hazard Class:         None
UN Number;         None
 

                           15.  REGULATORY INFORMATION

 
SARA   313 Chemicals: The following component(s) is listed as a SARA Section 313 
Toxic Chemical.
 
SARA 313 Information
NONE   
 
CALIFORNIA PROP 65;
WARNING: This product contains chemicals known to the State of California to 
cause cancer and birth defects or other reproductive harm.
 
TSCA Inventory Status:
Listed on Inventory:  YES  All components of this product are listed (or exempt) 
on the EPA TSCA inventory.
 

                              16.  OTHER INFORMATION

 
Estimated NFPA Rating:      Health 1,   Flammability 1,   Reactivity 0
Estimated HMIS Classification;   Health 1,   Flammability 1,   Physical Hazard 0
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
 
Prepared By:   Denise Boyd, Health and Safety Manager   Revision Date; 03/03/2004   
Company;   Permatex. Inc.  10 Columbus Blvd. Hartford, CT USA           
Revision 2
      06106                           Number:
 
Telephone Number; 1-87-Permatex  (877) 376-2839

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.