LOGIN
Login E-mail:
Password:

Apply for an account! »
Product Search
Bottom
 

MSDS 7791

7791: Leak Finding Dye For Coolants [1]
MSDS Last updated: 01/23/2009
TRACER PRODUCTS                     
MATERIAL SAFETY DATA SHEET                            Effective: 05/09/08       
                                                     Supersedes: 02/10/06


Section 1. Identification of the Substance/Preparation and Company
PRODUCT NAME: TP-3900
DESCRIPTION: Fluorescent Dye for Coolant Systems and Auto Body Inspection       
       USE: Leak Detection
EMERGENCY TELEPHONE #: 800-424-9300 (24 HOURS) CHEMTREC; Call collect outside
continental U.S.: 703-527-3887.
PRODUCT INFORMATION: Spectronics Corporation, 956 Brush Hollow Road, Westbury,
NY 11590, 800-641-1133.
                 For calls originating outside continental U.S.: 516-333-4840.


Section 2. Composition/Information on Ingredients

Product   Common Name/Chemical Name   CAS Number    %W   PEL(mg/m3)  TLV(mg/m3)

           Fluorescent Dye             See Below    5-25     NE         NE
           Water, deionized            7732-18-5    75-95    None       None

Fluorescent Dye: The specific identity has been withheld as a trade secret. 
New Jersey Trade Secret Registry Number NJ EIN 80100312-5002P.

Section 3. Hazards Identification
EMERGENCY OVERVIEW: May cause eye, skin and respiratory system irritation.
Primary Routes of Exposure: Eye; Skin; Ingestion; Inhalation.
Eye Contact: Can cause irritation, however based on animal toxicity testing we
consider this product to be nonirritating to the eye (see section 11). Skin
Contact: Irritation can occur following prolonged or repeated contact, however,
based on animal toxicity testing we consider this product to be nonirritating
to the skin (see section 11). Ingestion (swallowing): Ingestion can cause
gastrointestinal irritation, however, based on animal testing we would consider
this product to be nontoxic (see section 11). Inhalation: May cause respiratory
tract irritation resulting in coughing, sore throat and runny nose. Aggravation
of Existing Conditions: A person with impaired pulmonary function may be more
susceptible to the effects of this product.

Carcinogenicity:        ACGIH            IARC           NTP            OSHA
Fluorescent Dye           No              No            No             No
HMIS HAZARD RATING: Health: 1, Fire: 0, Reactivity: 0.


Section 4. First-Aid Measures
Eye Contact: Flush eyes with water for 15 minutes. If irritation develops,
consult a physician. Skin Contact: Wash affected area with soap and water. If
irritation develops, consult a physician. Inhalation (breathing): Remove to
fresh air. If symptoms develop, seek immediate medical attention. If not
breathing, give artificial respiration. Ingestion (swallowing): Call a physician
immediately. Induce vomiting only as directed by medical personnel.


Section 5. Fire-Fighting Measures
Flash Point: >200F (93.3C); Explosive Limit: LEL(%): Not Determined; UEL(%): 
Not Determined; Autoignition Temperature: Not Determined.
Unusual Fire and Hazardous Combustion and Decomposition Products: Smoke, soot,
and toxic/irritating fumes (i.e., carbon dioxide, carbon monoxide,
etc.). Fire and Explosion Hazards: May liberate irritating or toxic vapors
during combustion or decomposition. Extinguishing Media: Based on the
NFPA guide, use dry chemical, carbon dioxide, or alcohol foam. Use water to cool
containers exposed to fire. For large fires, use water spray or fog,
thoroughly drenching the burning material; Fire-Fighting Procedures/Equipment:
Fire fighters and others who may be exposed to the products of
combustion should be equipped with NIOSH-approved, positive-pressure,
self-contained breathing apparatus (SCBA) and full protective clothing.

Section 6. Accidental Release Measures
Spill Containment and Recovery: Use an absorbent and place contaminated material
in a suitable container for disposal. Disposal Methods: Disposal
must be in accordance with applicable governmental regulations. However, the
recommended dilution poses no adverse threat to the environment so that it
can be flushed to the sewers.

Storage Conditions: Store in a cool, dry, well-ventilated area away from heat,
ignition sources, and direct sunlight. Always keep containers tightly closed.
Keep from freezing. Personal Hygiene: Wash thoroughly after handling, especially
before eating, drinking, smoking, or using restroom facilities. Empty
Container Precautions: Do not reuse empty container for any purpose.


Section 8. Exposure Controls/Personal Protection
Engineering Controls/Ventilation: General (dilution) ventilation should be
acceptable. Eye Protection: Wear safety goggles. An eye wash facility should
be readily available. Skin Protection: Wear protective clothing and appropriate
impervious gloves. Respiratory Protection: Avoid breathing vapor and/or
mist. If occupational exposure limits are exceeded wear NIOSH/OSHA approved
equipment. High airborne concentrations may necessitate the use of self-
contained breathing apparatus (SCBA) or a supplied air respirator. Respiratory
protection programs must be in compliance with 29 CFR 1910.134.


Section 9. Physical and Chemical Properties
Appearance: Brown; Odor: None; Physical State: Liquid; Specific Gravity
(Water=1): ~ 1; Vapor Pressure 68 F (20 C): NA; Vapor Density
(Air=1): NA; Percent Volatile by Volume (%): 0; Evaporation Rate (Butyl
Acetate=1): NA; Solubility in Water: 100%; pH: 9; Boiling Range: >
212 F (100 C).
Note: The physical data presented above are typical values and should not be
construed as a specification.


Section 10. Stability And Reactivity
Chemical Stability: Stable under normal conditions of storage and use;
Conditions to Avoid: High temperatures. Incompatibility With Other
Materials: Oxidizers and reducers; Hazardous Polymerization: Will not occur.
Hazardous Decomposition Products: Combustion may produce carbon monoxide and
carbon dioxide.


Section 11. Toxicological Information
                           Fluorescent Dye*
Oral LD50        Rat       >5,000 mg/kg
Dermal LD50      Rabbit    >3,000 mg/kg
Inhalation LC50  Rat       >17,600 mg/m3
Eye Irritation   Rabbit    Nonirritating
Skin Irritation  Rabbit    Nonirritating

*Results are based on tests performed on a similar product.


Section 12. Ecological Information
                                            Fluorescent Dye*
Aquatic Toxicity LC50 (96h) Bluegill         >1,000 mg/l
Aquatic Toxicity LC50 (48h) Leuciscus idus   >100 mg/l

*Results are based on tests performed on a similar product.


Section 13. Disposal Considerations
Disposal: Dispose of in accordance with all local, state, and federal
regulations. General Statements: Federal regulations may apply to empty
container. State and/or local regulations may be different. Special
Instructions: Be sure to contact the appropriate government environmental
agencies if further guidance is required.


Section 14. Transport Information
DOT Shipping Name: Liquid ink; DOT Label: Not Applicable; DOT Identification
No.: Not Applicable; Nonregulated shipments by air under 49 CFR,
IATA/ICAO AND IMO.
  

Section 15. Regulatory Information
U.S. Federal Regulatory Information:
This product is not considered hazardous under the OSHA Hazard Communication
Standard (29 CFR 1910.1200).
SARA Title III Information:
Ozone-Depleting Chemicals: No regulated ingredients. Section 302-Extremely
Hazardous Substances: No regulated ingredients. Section 302-
Reportable Quantity: None. Section 311/312-Hazard Categories: Fire Hazard: No;
Sudden Release of Pressure Hazard: No; Reactivity Hazard: No;
Immediate (Acute) Health Hazard: Yes; Delayed (Chronic) Health Hazard: No.
Section 313-Toxic Chemicals: No regulated ingredients.
TSCA: The chemical components of this product are contained on the Section 8(B)
Chemical Substance Inventory List (40 CFR 710).
CERCLA: No regulated ingredients.

State Right-To-Know:
Pennsylvania - New Jersey R-T-K:

NAME                          CAS No.             %W
Fluorescent Dye               Proprietary         5-25
Water, De-ionized             7732-18-5           75-95

California - California Proposition 65 - No regulated ingredients.


Section 16. Other Information
USER'S RESPONSIBILITY: A bulletin such as this cannot be expected to cover all
possible individual situations. As the user has the responsibility to
provide a safe workplace, all aspects of an individual operation should be
examined to determine if, or where, precautions (in addition to those described
herein) are required. Any health hazard and safety information contained herein
should be passed on to your customers or employees, as the case may be.
DISCLAIMER OF LIABILITY: The information contained herein is, to the best of our
knowledge and belief, accurate. However, since the conditions of
handling and use are beyond our control, we make no guarantee of results, and
assume no liability for damages incurred by use of this material. All chemicals
may present unknown health hazards and should be used with caution. Although
certain hazards are described herein, we cannot guarantee that these are the
only hazards which exist. Final determination of suitability of the chemical is
the sole responsibility of the user. No representations or warranties, either
expressed or implied, of merchantability, fitness for a particular purpose or
any other nature are made hereunder with respect to the information contained
herein or the chemical to which the information refers. It is the responsibility
of the users to comply with all applicable federal, state and local laws and
regulations.

NA = Not Available


                                 End of Material Safety Data Sheet

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

For more product information by email, click here

Imperial Supplies LLC does not provide services and products outside the United States

credit card logos