LOGIN
Login E-mail:
Password:

Apply for an account! »
Product Search
Bottom
 

MSDS 7708

7708: Speed Grip Tpo Adhesion Promo [2]
MSDS Last updated: 10/22/2004
                            MATERIAL SAFETY DATA SHEET


PART #  63642504624
DATE PRINTED:  FEB 19, 2003
MSDS NO. 04624      OUTBOUND
TPO Adhesion Promoter

Imperial Part #7708


               SECTION 1.  CHEMICAL PRODUCT AND COMPANY INFORMATION


PRODUCT NAME
TPO Adhesion Promoter

MANUFACTURER (4)
Saint-Gobain Abrasives, Inc.
1 New Bond Street
Worcester, MA 01615
(254) 968-4161

EMERGENCY CONTACT
Infotrac

EMERGENCY TELEPHONE #1
1-800-535-5053

REVISION DATE
11/14/2002

MSDS PRINT FORMAT
AUTOUSA


                SECTION 2.  COMPOSITION/INFORMATION ON INGREDIENTS


SUBSTANCE DESCRIPTION          PERCENT               CAS#
--------------------------------------------------------------------------------
Acetone                        7.000 - 11.000        67 - 64 - 1
n-Butyl Alcohol                3.000                 71 - 36 - 3
Chlorinated Olefin Polymer     3.000 - 7.000         ND
Toluene (*)                    83.000                108 - 88 - 3
OTHER

(*) This substance is regulated under section 313 of the Emergency Planning and
Community Right - to- Know Act of 1986 and the Canadian National Pollution
Reduction Initiative (NPRI).


                        SECTION 3.  HAZARDS IDENTIFICATION


INHALATION ACUTE EXPOSURE EFFECTS
May cause dizziness or narcosis in high vapor concentrations. May irritate
respiratory tract.

INHALATION CHRONIC EXPOSURE EFFECTS
May cause liver and kidney damage. Repeated overexposure may cause central
nervous system injury.

SKIN CONTACT ACUTE EXPOSURE EFFECTS
Will cause defatting of skin.

EYE CONTACT ACUTE EXPOSURE EFFECTS
May cause severe eye irritation.

INGESTION ACUTE EXPOSURE EFFECTS
ND

MEDICAL CONDITIONS AGGRAVATED
N/E  (not established)


                          SECTION 4.  FIRST AID MEASURES


INHALATION
Remove victim to fresh air. Provide CPR and oxygen, if necessary.  Contact
Physician.

SKIN CONTACT
Rinse effected areas with mild soap and water. Remove contaminated clothing.
Wash clothing before reuse.

EYE CONTACT
Flush eyes with gentle stream of water for at least 15 minutes.  Contact
Physician.

INGESTION
Do not induce vomiting. If vomiting is spontaneous, keep head below waist to
prevent entry into lungs.


                        SECTION 5.  FIRE FIGHTING MEASURES


FIRE FIGHTING PROCEDURES
Fire fighters close enough to be in contact with fumes should wear
self-contained breathing apparatus. Use fog spray to cool down containers.

HAZARDOUS PRODUCTS/COMBUSTION
Oxides of carbon, hydrogen cyanide, nitrogen compounds

FIRE AND EXPLOSION HAZARDS
Closed containers exposed to high temperatures, such as fire conditions may
rupture.

EXTINGUISHING METHOD
Carbon dioxide, dry chemical, fog spray

FLASH POINT
   41.00  F      5.00  C

FLASH METHOD
TAG

UPPER EXPLOSION LIMIT
   N/A
LOWER EXPLOSION LIMIT
   1.2

HAZARD RATING SOURCE
   HMIS
      HEALTH
      1
      FLAMMABILITY
      4
      REACTIVITY
      0
      OTHER


                     SECTION 6.  ACCIDENTAL RELEASE MEASURES


CLEAN-UP
Remove all ignition sources, turn off all electric motors, absorb with inert
material. Keep spills away from municipal sewers.


                         SECTION 7.  HANDLING AND STORAGE


HANDLING
Sensitive to heat and moisture. Avoid contamination and keep away from all
possible ignition sources.

STORAGE
Store in flammable goods area away from direct heat and ignition

GENERAL COMMENTS


                SECTION 8.  EXPOSURE CONTROLS/PERSONAL PROTECTION


VENTILATION PROTECTION
Handle with adequate ventilation. See OSHA 29 CFR 1910.94
(ventilation) and 29 CFR 1910.1000  (Air contaminants).

RESPIRATORY PROTECTION
Self contained respirator if ventilation is inadequate.

SKIN PROTECTION
Rubber gloves when handling

EYE PROTECTION
Wear goggles.

OTHER PROTECTION
Faceshield

      EXPOSURE LIMITS/REGULATORY INFORMATION
SUBSTANCE DESCRIPTION        UNITS       OSHA        ACGIH   MOL
--------------------------------------------------------------------------------
Acetone
                   PPM       750.0000    750.0000    0.0000
n-Butyl Alcohol              0.0000      0.0000      0.0000
Chlorinated Olefin Polymer
                             0.0000      0.0000      0.0000
Toluene (*)
                   PPM       100.0000    50.0000     150.0000
LEGEND;
EXPOSURE LIMIT DESCRIPTIONS


                   SECTION 9.  PHYSICAL AND CHEMICAL PROPERTIES


APPEARANCE & ODOR
Liquid, N/D

SPECIFIC GRAVITY
0.85

VAPOR PRESSURE  (mm Hg)
N/D

VAPOR DENSITY  (Air = 1.0)
ND

EVAPORATION RATE


                      SECTION 10.  STABILITY AND REACTIVITY


INCOMPATIBILITIES
Oxidizing Agents

DECOMPOSITION
Oxides of carbon, nitrogen compounds, hydrogen cyanide, various hydrocarbons.

POLYMERIZATION
CONDITIONS TO AVOID
Water, heat and oxidizing agents

STABILITY
Stable.


                      SECTION 11.  TOXICOLOGICAL INFORMATION


INHALATION EFFECTS
Long term exposure (years) vapor may cause lung, liver or kidney damage.

DERMAL EFFECTS
No significant signs or symptoms of any adverse health effects are expected to
occur.

INGESTION EFFECTS
N/A


                       SECTION 12.  ECOLOGICAL INFORMATION


CHEMICAL FATE
Not Established


                       SECTION 13.  DISPOSAL CONSIDERATIONS


WASTE DISPOSAL
Dispose of in accordance with all applicable federal, state, and local
regulations.


                        SECTION 14.  TRANSPORT INFORMATION


DOT SHIPPING NAME


                          SECTION 15.  OTHER INFORMATION


CARCINOGENICITY
Toluene - EPA-D,  IARC-3

CA PROP 65
This product contains a chemical (Toluene) known to the State of California to
cause birth defects or other reproductive harm.

TSCA
Section 8 (b) - Inventory Status
All components of this product are registered under the regulations of the Toxic
Substance Control Act.

DOMESTIC SUBSTANCE LIST
All components of this product are found on the Domestic Substance List of the
country of Canada.

DISCLAIMER
   The information provided in this Safety Data Sheet is correct to the best of
our knowledge. Information and belief at the date of its publication. The
information given is designed only as a guidance for safe handling, use,
processing, storage, transportation, disposal and release and is not to be
considered a warranty or quality specification. The information relates only to
the specific material designated and may not be valid for such material used in
combination with any other materials or in any process unless specified in the
text.

   KEY TO ABBREVIATIONS;
   EQ=EQual      LT=Less Than      GT=Greater Than
   AP=Approximately   TR=TRace      ND=No Data available


The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

For more product information by email, click here

Imperial Supplies LLC does not provide services and products outside the United States

credit card logos