Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 7704 -- [Back] | |||
|
MSDS 7704 7704: Speed Grip Seam Sealer 220 Ml [6]7704-1: Speed Grip Seam Sealer 220 Ml [1] (DISCONTINUED) MSDS Last updated: 02/23/2010
MATERIAL SAFETY DATA SHEET
PART # 63642597120
DATE PRINTED: NOV 26, 2007
MSDS NO. 97120A OUTBOUND
Epoxy Seam Sealer - Part 1
(Part 2 is available as MSDS #
97120B)
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
PRODUCT NAME
Epoxy Seam Sealer-Part 1
(Part 2 is available as MSDS# 97120B)
TRADE NAME
MANUFACTURER(4)
Saint-Gobain Abrasives, Inc.
1 New Bond Street
Worcester, MA 01615
(254) 968-4161
EMERGENCY CONTACT
Infotrac
EMERGENCY TELEPHONE #1
1 800 535-5053
REVISION DATE
2/08/2007
MSDS PRINT FORMAT
AUTOUSA
SECTION 2. COMPOSITION/INFORMATION ON INDGREDIENTS
SUBSTANCE DESCRIPTION PERCENT CAS#
Bisphenol A Diglycidyl 40.000-70.000 25085-99-8
Ether R
Butyl Benzyl Phthalate(*) 10.000-30.000 85-68-7
Dimethyl Siloxane, 3.000-7.000 67762-90-7
Reaction Pr
Iron oxide 0.500-1.000 1309-37-1
OTHER
(*) This substance is regulated under section 313 of the Emergency
Planning and Community Right-to-Know Act of 1986 and the Canadian
National Pollution Reduction Initiative (NPRI).
SECTION 3. HAZARDS IDENTIFICATION
INHALATION ACUTE EXPOSURE EFFECTS
INHALATION CHRONIC EXPOSURE EFFECTS
SKIN CONTACT ACUTE EXPOSURE EFFECTS
EYE CONTACT ACUTE EXPOSURE EFFECTS
INGESTION ACUTE EXPOSOSURE EFFETCS
MEDICAL CONDITIONS AGGRAVATED
SECTION 4. FIRST AID MEASURES
INHALATION
If affected by inhalation of vapor or spray mist, move to fresh air.
SKIN CONTACT
For skin, wash thoroughly with soap and water. If irritation develops,
get medical attention.
EYE CONTACT
In case of eye contact, immediately flush eyes with running water for a
minimum of 15 minutes. Hold eyelids open during flushing. If irritation
persists, repeat flushing. Obtain medical attention IMMEDIATELY.
INGESTION
If swallowed, do not induce vomiting. Rinse the mouth. Drink 1-2 glasses
of milk to dilute product. Water may be used instead but not as
effective. Obtain medical attention IMMEDIATELY.
SECTION 5. FIRE FIGHTING MEASURES
FIRE FIGHTING PROCEDURES
HAZARDOUS PRODUCTS/COMBUSTION
Carbon monoxide, Silicon Dioxide.
FIRE AND EXPLOSION HAZARDS
EXTINGUISHING METHOD
Appropriate for surrounding area.
FLASH POINT
F C>150 (TCC deg. C)
FLASH METHOD
UPPER EXPLOSION LIMIT
LOWER EXPLOSION LIMIT
HAZARD RATING SOURCE
HMIS
HEALTH
1
FLAMMABILITY
0
REACTIVITY
0
OTHER
SECTION 6. ACCIDENTAL RELEASE MEASURES
CLEAN-UP
Ventilate enclosed spaces. Collect product for disposal. Notify
applicable government authority if release is reportable or could
adversely affect the environment.
SECTION 7. HANDLING AND STORAGE
HANDLING
STORAGE
Keep away from heat, sparks and open flames.
GENERAL COMMENTS
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
VENTILATION PROTECTION
Exhaust ventilation is recommended if used indoors on continuous basis.
RESPIRATORY PROTECTION
If exposure exceeds occupational limits (Butyl Benzyl Phthalate 5 ppm),
wear a NIOSH approved air-purifying respirator with organic vapor
cartridge for mists and vapors.
SKIN PROTETCION
Rubber gloves.
EYE PROTECTION
Chemical safety goggles with side shields.
OTHER PROTECTION
EXPOSURE LIMITS/REGULATORY INFORMATION
SUBSTANCE UNITS OSHA ACGIH MOL
DESCRIPTION
Bisphenol A 0.0000 0.0000 0.0000
Diglycidyl Ether
Resin
Butyl Benzyl MG/M3 0.0000 0.0000 0.0000
Phthalate(*)
Dimethyl 0.0000 0.0000 0.0000
Siloxane,
Reaction Product
Iron oxide MG/M3 10.0000 5.0000 5.0000
LEGEND:
EXPOSURE LIMIT DESCRIPTIONS
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE & ODOR
Black Paste, Epoxy
SPECIFIC GRAVITY
1.1
VAPOR PRESSURE (mm Hg)
Not Available
VAPOR DENSITY (Air=1.0)
>1
EVAPORATION RATE
n-Butyl Acetate=1
SECTION 10. STABILITY AND REACTIVITY
INCOMPATIBILITIES
No, with strong acids, strong bases, strong oxidizing materials.
DECOMPOSITION
Carbon monoxide, Silicon dioxide.
POLYMERIZATION
Will not occur.
CONDITIONS TO AVOID
STABILITY
Yes, under normal conditions.
SECTION 11. TOXICOLOGICAL INFORMATION
INHALATION EFFECTS
Vapors are not considered a problem at normal temperature.
DERMAL EFFETCS
Skin contact may cause irritation. Prolonged contact may lead to
dermatitis.
INGESTION EFFECTS
Swallowing may cause burning of the mouth and stomach. Other possible
effects are abdominal pain, nausea and diarrhea.
SECTION 12. ECOLOGICAL INFORMATION
CHEMICAL FATE
SECTION 13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL
SECTION 14. TRANSPORT Information
DOT SHIPPING NAME
Not regulated
SECTION 15. OTHER INFORMATION
CARCINOGENICITY
No information is available and no adverse Carcinogenic effects are
anticipated.
CA PROP 65
TSCA
Section 8 (b)-Inventory Status
All components of this product are registered under the regulations of
the Toxic Substance Control Act.
DOMESTIC SUBSTANCE LIST
All components of this product are found on the domestic Substance List
of the country of Canada.
DISCLAIMER
The information provided in this Safety Data Sheet is correct to the
best of our knowledge. Information and belief at the date of its
publication. The information given is designed only as guidance for safe
handling, use, processing, storage, transportation, disposal and release
and is not to be considered a warranty or quality specification. The
information relates only to the specific material designated and may not
be valid for such material used in combination with any other materials
or in any process unless specified in the text.
KEY TO ABBREVIATIONS:
EQ=Equal LT=Less Than GT=Greater Than
AP=Approximately TR=Trace ND=No Data available
MATERIAL SAFETY DATA SHEET
PART # 63642597120
DATE PRINTED: NOV 26, 2007
MSDS NO. 97120B OUTBOUND
Epoxy Seam Sealer - Part2
(Part 1 is available as MSDS
#97120A)
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
PRODUCT NAME
Epoxy Seam Sealer-Part 2
(Part 1 is available as MSDS #97120A)
TRADE NAME
MANUFACTURER(4)
Saint-Gobain Abrasives, Inc.
1 New Bond Street
Worcester, MA 01615
(254) 968-4161
EMERGENCY CONTACT
Infotrac
EMERGENCY TELEPHONE #1
1 800 535-5053
REVISION DATE
2/08/2007
MSDS PRINT FORMAT
AUTOUSA
SECTION 2. COMPOSITION/INFORMATION ON INDGREDIENTS
SUBSTANCE DESCRIPTION PERCENT CAS#
Dimethyl Siloxane, 3.000-7.000 67762-90-7
reaction Pr
Phenol, 2,4,6-tris 7.000-13.000 90-72-2
[dimethylami
Poly Alkoxylated 60.000-90.000
Hydroxyalkyl
OTHER
SECTION 3. HAZARDS IDENTIFICATION
INHALATION ACUTE EXPOSURE EFFECTS
INHALATION CHRONIC EXPOSURE EFFECTS
SKIN CONTACT ACUTE EXPOSURE EFFECTS
EYE CONTACT ACUTE EXPOSURE EFFECTS
INGESTION ACUTE EXPOSOSURE EFFETCS
MEDICAL CONDITIONS AGGRAVATED
SECTION 4. FIRST AID MEASURES
INHALATION
If affected by inhalation of vapor or spray mist, move to fresh air.
SKIN CONTACT
For skin, wash thoroughly with soap and water. If irritation develops,
get medical attention.
EYE CONTACT
In case of eye contact, immediately flush eyes with running water for a
minimum of 15 minutes. Hold eyelids open during flushing. If irritation
persists, repeat flushing. Obtain medical attention IMMEDIATELY.
INGESTION
If swallowed, do not induce vomiting. Rinse the mouth. Drink 1-2 glasses
of milk to dilute product. Water may be used instead but not as
effective. Obtain medical attention IMMEDIATELY.
SECTION 5. FIRE FIGHTING MEASURES
FIRE FIGHTING PROCEDURES
HAZARDOUS PRODUCTS/COMBUSTION
Carbon monoxide, Nitrogen oxides, Sulphur oxides.
FIRE AND EXPLOSION HAZARDS
EXTINGUISHING METHOD
FLASH POINT
F C 149 (TCC deg. C)
FLASH METHOD
UPPER EXPLOSION LIMIT
LOWER EXPLOSION LIMIT
HAZARD RATING SOURCE
HMIS
HEALTH
1
FLAMMABILITY
0
REACTIVITY
0
OTHER
SECTION 6. ACCIDENTAL RELEASE MEASURES
CLEAN-UP
Ventilate enclosed spaces. Collect product for disposal. Notify
applicable government authority if release is reportable or could
adversely affect the environment.
SECTION 7. HANDLING AND STORAGE
HANDLING
STORAGE
Keep away from heat, sparks and open flames.
GENERAL COMMENTS
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
VENTILATION PROTECTION
Exhaust ventilation is recommended if used indoors on continuous basis.
RESPIRATORY PROTECTION
If exposure exceeds occupational limits (Butyl Benzyl Phthalate 5 ppm),
wear a NIOSH approved air-purifying respirator with organic vapor
cartridges for mists and vapors.
SKIN PROTETCION
Rubber gloves.
EYE PROTECTION
Chemical safety goggles with side shields
OTHER PROTECTION
EXPOSURE LIMITS/REGULATORY INFORMATION
SUBSTANCE UNITS OSHA ACGIH MOL
DESCRIPTION
Dimethyl 0.00000 0.0000 0.0000
Siloxane,
Reaction
Product
Phenol, 0.0000 0.0000 0.0000
2,4,6-tris
[dimethylamno]
me
Poly 0.0000 0.0000 0.0000
Alkoxylated
Hydroxyalkl
Thiol
LEGEND:
EXPOSURE LIMIT DESCRIPTIONS
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE & ODOR
Grey, Paste, Mercaptan
SPECIFIC GRAVITY
1.2 (estimate)
VAPOR PRESSURE (mm Hg)
Not Available
VAPOR DENSITY (Air=1.0)
>1
EVAPORATION RATE
n-Butyl Acetate=1
SECTION 10. STABILITY AND REACTIVITY
INCOMPATIBILITIES
No, with strong oxidizing agents, strong bases, epoxies.
DECOMPOSITION
Carbon monoxide, Oxides of nitrogen, Oxides of sulphur, Hydrogen
POLYMERIZATION
Will not occur.
CONDITIONS TO AVOID
STABILITY
Yes, under normal conditions.
SECTION 11. TOXICOLOGICAL INFORMATION
INHALATION EFFECTS
Vapors might be irritating to throat and respiratory tract.
DERMAL EFFETCS
Skin contact may cause irritation. Prolonged contact may lead to
dermatitis.
INGESTION EFFECTS
Swallowing may cause burning of the mouth and stomach. Other possible
effects are abdominal pain, nausea and diarrhea.
SECTION 12. ECOLOGICAL INFORMATION
CHEMICAL FATE
SECTION 13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL
SECTION 14. TRANSPORT Information
DOT SHIPPING NAME
Not regulated
SECTION 15. OTHER INFORMATION
CARCINOGENICITY
No information is available and no adverse Carcinogenic effects are
anticipated.
CA PROP 65
TSCA
Section 8 (b)-Inventory Status
All components of this product are registered under the regulations of
the Toxic Substance Control Act.
DOMESTIC SUBSTANCE LIST
All components of this product are found on the domestic Substance List
of the country of Canada.
DISCLAIMER
The information provided in this Safety Data Sheet is correct to the
best of our knowledge. Information and belief at the date of its
publication. The information given is designed only as guidance for safe
handling, use, processing, storage, transportation, disposal and release
and is not to be considered a warranty or quality specification. The
information relates only to the specific material designated and may not
be valid for such material used in combination with any other materials
or in any process unless specified in the text.
KEY TO ABBREVIATIONS:
EQ=Equal LT=Less Than GT=Greater Than
AP=Approximately TR=Trace ND=No Data available
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
