Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 7701 -- [Back] | |||
|
MSDS 7701 7701: Structural Adhesive 5 Min [6]7701-1: Structural Adhesive 5 Min [1] MSDS Last updated: 02/24/2010
MATERIAL SAFETY DATA SHEET | |
PART # 63642504616
DATE PRINTED: DEC 10, 2009
MSDS NO. 04616A OUTBOUND
SpeedGrip Structural Adhesive- 5 minute- Part 1
(Part 2 is available as MSDS #
04616B)
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
PRODUCT NAME
SpeedGrip Structural Adhesive-5
minute-Part 1
(Part 2 is available as MSDS# 04616B)
TRADE NAME
MANUFACTURER(4)
Saint-Gobain Abrasives, Inc.
1 New Bond Street
Worcester, MA 01615
(254) 968-4161
EMERGENCY CONTACT
EMERGENCY TELEPHONE #1
REVISION DATE
6/12/2009
MSDS PRINT FORMAT
AUTOUSA
SECTION 2. COMPOSITION/INFORMATION ON INDGREDIENTS
SUBSTANCE DESCRIPTION PERCENT CAS#
Calcium Sodium 7.000-12.000 1344-01-0
aluminosilicate
Colloidal Silica 1.000-5.000 68611-44-9
MDI Polymer 7.000-12.000 39310-05-9
Polyurethane polymer 31.000-46.000 68400-67-9
@Crystalline Silica, 0.100 14808-60-7
Quartz
Talc (no asbestos) 7.000-12.000 14807-96-6
4, 4 DiPhenylmeth. 35.000 101-68-8
DiIsocyanate
OTHER
SECTION 3. HAZARDS IDENTIFICATION
INHALATION ACUTE EXPOSURE EFFECTS
Irritation of the respiratory tract, vomiting, nausea, cough, tightness
in chest, headache
INHALATION CHRONIC EXPOSURE EFFECTS
May aggravate existing conditions of respiratory sensitization
SKIN CONTACT ACUTE EXPOSURE EFFECTS
May cause irritation of the skin.
EYE CONTACT ACUTE EXPOSURE EFFECTS
May irritate eyes.
INGESTION ACUTE EXPOSOSURE EFFETCS
ND
MEDICAL CONDITIONS AGGRAVATED
Asthma and any other respiratory disorders (bronchitis, emphysema,
hyperreactivity).
SECTION 4. FIRST AID MEASURES
INHALATION
Remove victim to fresh air. Provide CPR and oxygen, if necessary.
Contact Physician.
SKIN CONTACT
Rinse effected areas with mild soap and water. Remove contaminated
clothing. Wash clothing before reuse.
EYE CONTACT
Flush eyes with gentle stream of water for at least 15 minutes. Contact
Physician.
INGESTION
Do not induce vomiting. If vomiting is spontaneous, keep head below
waist to prevent entry into lungs.
SECTION 5. FIRE FIGHTING MEASURES
FIRE FIGHTING PROCEDURES
Fire fighters close enough to be in contact with fumes should wear
self-contained breathing apparatus. Use fog spray to cool down
containers.
HAZARDOUS PRODUCTS/COMBUSTION
Oxides of carbon, hydrogen cyanide, nitrogen compounds
FIRE AND EXPLOSION HAZARDS
Flammability-On contact with ignition source, flame or temperature above
flashpoint
EXTINGUISHING METHOD
Carbon dioxide, dry chemical, fog spray
FLASH POINT
203.00 F 95.00 C
FLASH METHOD
UPPER EXPLOSION LIMIT
N/A
LOWER EXPLOSION LIMIT
N/A
HAZARD RATING SOURCE
HMIS
HEALTH
1
FLAMMABILITY
0
REACTIVITY
0
OTHER
SECTION 6. ACCIDENTAL RELEASE MEASURES
CLEAN-UP
Remove all ignitions sources, turn off all electric motors, absorb with
inert material ventilate area. Avoid breathing vapours or dust.
Neutralize with aqueous ammonia solution.
SECTION 7. HANDLING AND STORAGE
HANDLING
Sensitive to heat and moisture. Avoid contamination and keep away from
all possible ignition sources.
STORAGE
Store in flammable goods area away from direct heat and ignition
GENERAL COMMENTS
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
VENTILATION PROTECTION
Handle with adequate ventilation. See OSHA 29 CFR 1910.94 (ventilation)
and 29 CFR 1910.1000 (Air contaminants).
RESPIRATORY PROTECTION
Self contained respirator if ventilation is inadequate.
SKIN PROTETCION
Rubber gloves when handling
EYE PROTECTION
Wear goggles
OTHER PROTECTION
Faceshield
EXPOSURE LIMITS/REGULATORY INFORMATION
SUBSTANCE UNITS OSHA ACGIH MOL
DESCRIPTION
Calcium sodium 0.0000 0.0000 0.0000
aluminosilicate
Colloidal Silica 0.0000 0.0000 0.0000
MDI Polymer 0.0000 0.0000 0.0000
Polyurethane 0.0000 0.0000 0.0000
polymer
@Crystalline PPM 0.1000 0.1000 0.0000
Silica, Quartz
Talc (no MG/M3 0.0000 0.0000 0.0000
asbestos)
4, 4 0.0000 0.0000 0.0000
DiPhenylmeth. Di
Isocyanate
LEGEND:
EXPOSURE LIMIT DESCRIPTIONS
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE & ODOR
Liquid, N/D
SPECIFIC GRAVITY
1.288
VAPOR PRESSURE (mm Hg)
N/D
VAPOR DENSITY (Air=1.0)
1.0
EVAPORATION RATE
SECTION 10. STABILITY AND REACTIVITY
INCOMPATIBILITIES
Strong acids, bases, water and excessive heat
DECOMPOSITION
Oxides of carbon, nitrogen compounds, hydrogen cyanide, various
hydrocarbons
POLYMERIZATION
CONDITIONS TO AVOID
Water, heat and oxidizing agents
STABILITY
Stable.
SECTION 11. TOXICOLOGICAL INFORMATION
INHALATION EFFECTS
Overexposure may cause respiratory sensitization
DERMAL EFFETCS
No significant signs or symptoms of any adverse health effects are
expected to occur.
INGESTION EFFECTS
N/A
SECTION 12. ECOLOGICAL INFORMATION
CHEMICAL FATE
Not Established
SECTION 13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL
Incinerate in accordance with local regulation.
SECTION 14. TRANSPORT Information
DOT SHIPPING NAME
SECTION 15. OTHER INFORMATION
CARCINOGENICITY
Crystalline Silica, Quartz- IARC-1, NIOSH-X, NTP-R; Amorphous Silica,
Fused IARC-3, NIOSH-X
CA PROP 65
This product contains a chemical (Silica) known to the State of
California to cause cancer and/or birth defects or other reproductive
harm.
TSCA
Section 8 (b)-Inventory Status
All components of this product are registered under the regulations of
the Toxic Substance Control Act.
DOMESTIC SUBSTANCE LIST
All components of this product are found on the domestic Substance List
of the country of Canada.
DISCLAIMER
The information provided in this Safety Data Sheet is correct to the
best of our knowledge. Information and belief at the date of its
publication. The information given is designed only as guidance for safe
handling, use, processing, storage, transportation, disposal and release
and is not to be considered a warranty or quality specification. The
information relates only to the specific material designated and may not
be valid for such material used in combination with any other materials
or in any process unless specified in the text.
KEY TO ABBREVIATIONS:
EQ=Equal LT=Less Than GT=Greater Than
AP=Approximately TR=Trace ND=No Data available
MATERIAL SAFETY DATA SHEET
PART # 63642504616
DATE PRINTED: DEC 10, 2009
MSDS NO. 04616B OUTBOUND
SpeedGrip Structural Adhesive- 5 minute- Part2
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
PRODUCT NAME
SpeedGrip Structural Adhesive-5
minute-Part 2
TRADE NAME
MANUFACTURER(4)
Saint-Gobain Abrasives, Inc.
1 New Bond Street
Worcester, MA 01615
(254) 968-4161
EMERGENCY CONTACT
EMERGENCY TELEPHONE #1
REVISION DATE
06/12/2009
MSDS PRINT FORMAT
AUTOUSA
SECTION 2. COMPOSITION/INFORMATION ON INDGREDIENTS
SUBSTANCE DESCRIPTION PERCENT CAS#
Oxirane, methyl-, 38.000-42.000 9082-00-2
polymer with
Polyol 4.000-9.000 ND
Polyurethane polymer 31.000-46.000 68400-67-9
Silica, Amorphous, 1.000-3.6000 112926-00-8
Percipitate
@Crystalline Silica, 0.100-2.200 14808-60-7
Quartz
Talc (no asbestos) 7.000-12.000 14807-96-6
OTHER
SECTION 3. HAZARDS IDENTIFICATION
INHALATION ACUTE EXPOSURE EFFECTS
Irritation of the respiratory tract, vomiting, nausea, cough, tightness
in chest, headache. Swallowing large amounts may be harmful.
INHALATION CHRONIC EXPOSURE EFFECTS
May aggravate existing conditions of respiratory sensitization
SKIN CONTACT ACUTE EXPOSURE EFFECTS
May cause irritation of the skin.
EYE CONTACT ACUTE EXPOSURE EFFECTS
May irritate eyes.
INGESTION ACUTE EXPOSOSURE EFFETCS
ND
MEDICAL CONDITIONS AGGRAVATED
Asthma and any other respiratory disorders (bronchitis, emphysema,
hyperreactivity).
SECTION 4. FIRST AID MEASURES
INHALATION
Remove victim to fresh air. Provide CPR and oxygen, if necessary.
Contact Physician.
SKIN CONTACT
Rinse effected areas with mild soap and water. Remove contaminated
clothing. Wash clothing before reuse.
EYE CONTACT
Flush eyes with gentle stream of water for at least 15 minutes. Contact
Physician.
INGESTION
Do not induce vomiting. If vomiting is spontaneous, keep head below
waist to prevent entry into lungs.
SECTION 5. FIRE FIGHTING MEASURES
FIRE FIGHTING PROCEDURES
Fire fighters close enough to be in contact with fumes should wear
self-contained breathing apparatus. Use fog spray to cool down
containers.
HAZARDOUS PRODUCTS/COMBUSTION
Oxides of carbon, hydrogen cyanide, nitrogen compounds
FIRE AND EXPLOSION HAZARDS
Flammability-On contact with ignition source, flame or temperature above
flashpoint
EXTINGUISHING METHOD
Carbon dioxide, dry chemical, fog spray
FLASH POINT
203.00 F 95.00 C
FLASH METHOD
UPPER EXPLOSION LIMIT
N/A
LOWER EXPLOSION LIMIT
N/A
HAZARD RATING SOURCE
HMIS
HEALTH
1
FLAMMABILITY
0
REACTIVITY
0
OTHER
SECTION 6. ACCIDENTAL RELEASE MEASURES
CLEAN-UP
Remove all ignitions sources, turn off all electric motors, absorb with
inert material ventilate area. Avoid breathing vapours or dust.
Neutralize with aqueous ammonia solution.
SECTION 7. HANDLING AND STORAGE
HANDLING
Sensitive to heat and moisture. Avoid contamination and keep away from
all possible ignition sources.
STORAGE
Store in flammable goods area away from direct heat and ignition
GENERAL COMMENTS
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
VENTILATION PROTECTION
Handle with adequate ventilation. See OSHA 29 CFR 1910.94 (ventilation)
and 29 CFR 1910.1000 (Air contaminants).
RESPIRATORY PROTECTION
Self contained respirator if ventilation is inadequate.
SKIN PROTETCION
Rubber gloves when handling
EYE PROTECTION
Wear goggles
OTHER PROTECTION
Faceshield
EXPOSURE LIMITS/REGULATORY INFORMATION
SUBSTANCE UNITS OSHA ACGIH MOL
DESCRIPTION
Oxirane, 0.00000 0.0000 0.0000
methyl-,
polymer with
oxir
Polyol 0.0000 0.0000 0.0000
Polyurethane PPM 0.0000 0.0000 0.0000
polymer
Silica, 0.0000 0.0000 0.0000
Amorphous,
Percipitated
@Crystalline 0.1000 0.1000 0.0000
Silica, Quartz
Talc (no MG/M3 0.0000 0.0000 0.0000
asbestos)
LEGEND:
EXPOSURE LIMIT DESCRIPTIONS
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE & ODOR
Liquid, N/d
SPECIFIC GRAVITY
1.288
VAPOR PRESSURE (mm Hg)
N/D
VAPOR DENSITY (Air=1.0)
1.0
EVAPORATION RATE
SECTION 10. STABILITY AND REACTIVITY
INCOMPATIBILITIES
Strong acids, bases, water and excessive heat
DECOMPOSITION
Oxides of carbon, nitrogen compounds, hydrogen cyanide, various
hydrocarbons
POLYMERIZATION
CONDITIONS TO AVOID
Water, heat and oxidizing agents
STABILITY
Stable.
SECTION 11. TOXICOLOGICAL INFORMATION
INHALATION EFFECTS
Prolonged breathing of dust may result in progressive lung disease
(Fibrosis).
DERMAL EFFETCS
No significant signs or symptoms of any adverse health effects are
expected to occur.
INGESTION EFFECTS
N/A
SECTION 12. ECOLOGICAL INFORMATION
CHEMICAL FATE
Not Established
SECTION 13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL
Incinerate in accordance with local regulation.
SECTION 14. TRANSPORT Information
DOT SHIPPING NAME
SECTION 15. OTHER INFORMATION
CARCINOGENICITY
Crystalline Silica, Quartz- IARC-1, NIOSH-X, NTP-R; Amorphous Silica,
fused IARC-3, NIOSH-X
CA PROP 65
This product contains a chemical (Silica) known to the State of
California to cause cancer and/or birth defects or other reproductive
harm.
TSCA
Section 8 (b)-Inventory Status
All components of this product are registered under the regulations of
the Toxic Substance Control Act.
DOMESTIC SUBSTANCE LIST
All components of this product are found on the domestic Substance List
of the country of Canada.
DISCLAIMER
The information provided in this Safety Data Sheet is correct to the
best of our knowledge. Information and belief at the date of its
publication. The information given is designed only as guidance for safe
handling, use, processing, storage, transportation, disposal and release
and is not to be considered a warranty or quality specification. The
information relates only to the specific material designated and may not
be valid for such material used in combination with any other materials
or in any process unless specified in the text.
KEY TO ABBREVIATIONS:
EQ=Equal LT=Less Than GT=Greater Than
AP=Approximately TR=Trace ND=No Data available
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
