MSDS 7650

                                HARD CAST PRODUCTS                               
                    CARLISLE COATINGS AND WATERPROOFING, INC.
                        Subsidiary of Carlisle Corporation
                  903 W. Kirby, P.O. Box 1239 Wylie, Texas 75098

 
Business Hours 8;00 am - 5;00 pm
Emergency Telephone Number
214/442/6545
For Transportation Emergencies Call CHEMTREC  800-454-8000
 

                                    SECTION I

 
Product Name and Synonyms
AFT 701          Aluminum foil backed tape with gray butyl adhesive/sealant
BRT 801          Black high density polyethylene tape with gray butyl 
                 adhesive/sealant
TRT 851          Terracotta high flexibility polyethylene tape with gray butyl 
                 adhesive/sealant. 
CRT 1602         Light gray polyester fabric tape with gray butyl 
                 adhesive/sealant.
SST 3301         White PVF film backed tape with gray butyl adhesive/sealant.
RMR 6312 / 6325  White self curing EPDM tape / patch with gray butyl adhesive / 
                 sealant
TGM 3300         Gray, very sticky putty like ribbon of butyl adhesive between   
                2 release liners. 
Product Use                   Chemical Family                 Formula
--------------------------------------------------------------------------------
Roofing Repair Compounds      Rubber                          Proprietary
 

                       SECTION II A - HAZARDOUS INGREDIENTS

 
HAZARDOUS           CAS #      %   OSHA   PEL    SKIN      LD50       LC50
INGREDIENTS                         (ppm)        of ingredient     of ingredient
                     YWA  STEL  Ceiling Designation       mg/kg       ppm/4H
Calcium Carbonate  1317-65-3   5-10  N/A  N/A     N/A     Orl -rat: 6,450  N/A
 

                  SECTION II B - ADDITIONAL INGREDIENTS (> 3 %)

 
Additional Ingredients (>3%); Inert Fillers and Hydrocarbon Resins
N/A = Not applicable
N/E = Not established
 

                           SECTION III - PHYSICAL DATA

 
Specific Gravity Boiling Point    % Volatiles By Wt        Vapor Density 
1.25      314? F  (157 ?C)        None                     Not Applicable
 
Vapor Pressure        Freezing Point    Solubility in Water   Evaporation Rate   
-------------------------------------------------------------------------------
Not Applicable        Not Established   Not Soluble           Not Applicable
 
pH                    Physical State    Odor Threshold        Corrosivity
--------------------------------------------------------------------------------
Not Applicable        Solid             Not Applicable        Not Applicable
 
VOC            Odor & Appearance      
None           Gray tacky compound on backing or panel with mild rubber odor. 
 

                   SECTION IV - FIRE AND EXPLOSION HAZARD DATA

 
Flammability                  If yes, under what conditions.
Not Flammable
 
Flashpoint     Auto ignition Temperature     Lower Flammable Limit     
--------------------------------------------------------------------------------
None - TCC     Not Applicable                Not Applicable   

Upper Flammable Limit
--------------------------------------------------------------------------------
Not Applicable
 
Hazardous Combustion Products
Carbon Monoxide and Carbon Dioxide
 
Extinguishing Media
Water, dry chemicals, foam, Carbon dioxide
 
Special Firefighting Procedures
Follow normal fire fighting procedures. Firefighters should wear self-contained 
breathing apparatus, especially in enclosed areas. Will not burn unless 
preheated. 
 
Unusual Fire & Explosion Hazards
There is no evidence that this product is sensitive to physical shock or static 
discharge. 
 

                           SECTION V - REACTIVITY DATA

 
This product is chemically stable.  Hazardous polymerization will not occur. 
Conditions to Avoid
Keep away from excessive heat. 
 
Incompatibility
Avoid strong acids or strong oxidizing agents. 
 
Hazardous Decomposition Products
Combustion may yield a variety of compounds such as CO, CO2, simple 
hydrocarbons, acids, aldehydes, ketones.
 

                      SECTION VI - TOXICOLOGICAL PROPERTIES

 
Effects of Acute Exposure to Product
No known effects. Considered nontoxic and non injurious. 
Eye Contact: May cause mild mechanical irritation to eyes. 
Skin Contact; May cause mild mechanical irritation on skin.
Ingestion or Inhalation very unlikely. Low order of acute oral toxicity.
 
Irritation, as noted above.
 
All evidence indicates that large polymer molecules are not biologically 
inactive. 
 
Effects of Chronic Exposure To Product
None Known
 
Exposure Limits    Sensitization  Irritancy of Product    Synergistic Products
--------------------------------------------------------------------------------
Not Established    None Known     None Known              None Known
 
Carcinogenicity    Mutagenicity & Tumorigenicity    Reproductive Toxicity     
--------------------------------------------------------------------------------
No evidence        No evidence                      No evidence

Teratogenicity 
--------------------------------------------------------------------------------
No evidence    
 

                        SECTION VII - PREVENTIVE MEASURES

 
Eye Protection   Gloves
Not Required     Cotton or other protective gloves
 
Respirator       Respirator
Not Needed       Industrial shoes to prevent contact
 
Other
Long sleeves & long trousers to prevent skin contact. 
 
Engineering Controls
Not Applicable
 
Leak Or Spill Procedures
Not Applicable
 
Waste Disposal
Dispose of in accordance with all local, state, and federal regulations. 
 
Handling Procedures & Equipment
Keep out of reach of children.
Wash with soap and water after use, especially before eating, smoking, or 
drinking.
 
Storage Requirements
Keep away from excessive heat. Material may flow and could create a duration 
contact burn on hand. 
 
Special Shipping Information
Item 35240 Class 55
 

                        SECTION VIII - FIRST AID MEASURES

 
Eye Contact
Do not remove. Get Medical Attention.
 
Skin Contact
Care should be taken in the removal of the hot melt adhesive.
Get medical attention if too sensitive. 
 
Inhalation
Not Applicable
 
Ingestion
Unlikely, but if ingested, it could create a blockage. Get medial attention.
 

               SECTION IX - SARA SECTION 313 SUPPLIER NOTIFICATION

 
Chemical Name       CAS #      %     Chemical Name    CAS #              %
 
 

                       SECTION X - PREPARATION INFORMATION

 
Prepared by             Date          Revision #         Supersedes All Previous
Research & Development  13 June 1994  # 4                Publications
 

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.