![]() |
![]() |
![]() |
|
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 7635 -- [Back] | |||
|
MSDS 7635 7635: Cutting Oil 1 Oz Bottle [4] (DISCONTINUED)7636: Cutting Oil 4 Oz Bottle [2] MSDS Last updated: 09/05/2007
MATERIAL SAFETY DATA SHEET
MANUFACTURER'S NAME
CHEMICAL SYSTEMS
4310 CRANWOOD PARKWAY
WARRENSVILLE HEIGHTS, OHIO 44128
EMERGENCY TELEPHONE NO.
(216) 663-8110
INFORMATION TELEPHONE NO.
(216) 663-8114
DATE OF PREPARATION
2-19-07
SECTION 1 - PRODUCT IDENTIFICATION
PRODUCT NAME AND NUMBER
IMPERIAL PREMIUM CUTTING FLUID -7635
SECTION II - HAZARDOUS INGREDIENTS
CAS NO. INGREDIENT WT.% ACGIH OSHA UNITS
TLV PEL
9038-95-3 Polyalkylene 40-65 none established
Glycol
102-71-6 Triethanolamine 5-20 5 MG/M3
67989-06-4 Polyether Phosphate 0-10 none established
111-42-2 Diethanolamine 0.5 -2 2 MG/M3 3 PPM
SECTION III - PHYSICAL DATA
PRODUCT WEIGHT - 8.84 lb/gal
SPECIFIC GRAVITY - 1.06 (water = 1.0)
BOILING POINT - >212F (100C)
PH - 9.0
APPEARANCE & ODOR - Amber Liquid, Slight Ammonia
EVAPORATION RATE - <1 (ether=1)
VAPOR DENSITY - <1 water (air=1.0)
MELTING POINT - N/A
SOLUBILITY IN WATER - Miscible
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLAMMABILITY CLASSIFICATION - Non Flammable
FLASH POINT > 212 F
EXTINGUISHING MEDIA - Carbon Dioxide, Dry Chemical, Foam
UNUSUAL FIRE AND EXPLOSION HAZARDS - None known.
HAZARDOUS PRODUCTS FORMED BY FIRE OR THERMAL DECOMPOSITION -
Oxides of carbon, phosphorous.
SPECIAL FIRE FIGHTING PROCEDURES - none known.
Water may be used to cool closed containers to prevent pressure build-up.
SECTION V - HEALTH HAZARD DATA
ROUTES OF EXPOSURE - Inhalation, skin/eye contact
ACUTE HEALTH HAZARDS - Irritation of eyes, skin and respiratory system.
HMIS RATING - Health - 1 Fire - 0 Reactivity - 0
SIGNS & SYMPTOMS OF OVEREXPOSURE - Redness, itching or burning sensation may
indicate eye or excessive skin exposure.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE -
None generally recognized.
EMERGENCY AND FIRST AID PROCEDURES -
Inhalation - Remove to fresh air. If breathing is difficult, have trained
person administer oxygen. Get immediate medical attention.
Skin - Wash affected area with soap and water. Remove contaminated clothing and
launder before re-use.
Eyes - Flush eyes with copious amounts of water for 15 minutes.
Get medical attention.
Ingestion - DO NOT INDUCE VOMITING. Give conscious person several glasses of
water. Get medical attention.
TOXICITY - May be an irritant, toxic by ingestion.
PRIMARY ROUTES OF ENTRY: Inhalation, eyes, skin, ingestion.
SECTION VI - REACTIVITY DATA
STABILITY - Stable
CONDITIONS TO AVOID - Oxidizers
INCOMPATIBILITY - None known.
HAZARDOUS DECOMPOSITION PRODUCTS - Oxides of carbon, phosphorous.
HAZARDOUS POLYMERIZATION - Will not occur.
SECTION VII - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED - Ventilate and
remove with inert absorbent.
WASTE DISPOSAL METHOD - Incineration is the preferred method of disposal.
Package, store, transport and dispose of all waste and contaminated equipment
in accordance with all applicable federal, state and local health and
environmental regulations.
SECTION VIII - PROTECTION INFORMATION
PRECAUTIONS TO BE TAKEN IN USE
VENTILATION - Well ventilated area.
RESPIRATORY PROTECTION - Respirator if adequate ventilation absent.
PROTECTIVE GLOVES - Yes
EYE PROTECTION - Yes
SECTION IX - PRECAUTIONS
STORAGE AND HANDLING CONDITIONS - Store below 120 F. Keep containers tightly
closed.
SECTION X - SHIPPING INFORMATION
PROPER SHIPPING NAME U.S. DOT NON-BULK - NOT REGULATED
U.S. DOT BULK - NOT REGULATED
SECTION XI - FEDERAL / INTERNATIONAL
TSCA STATUS
All components of this product are on the TSCA inventory or are exempt from
inventory requirements.
CERCLA RQ - 40 CFR 302
Component (BULK) RQ (lbs)
DIETHANOLAMINE 5
SARA 302 - 40 CFR 355
NONE
SECTION 311/312 HAZARD CLASS
IMMEDIATE AND DELAYED
SARA 313 COMPONENTS
DIETHANOLAMINE
DSL (CANADA)
The intentional ingredients of this product are listed.
CANADIAN WHMIS
D2B - EYE OR SKIN IRRITANT
CPR - HPA SECTION 13 AND 14
TRIETHANOLAMINE
DIETHANOLAMINE
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |