MSDS Sheet 7632

• All Products
• Fasteners
   » Grade 8
   » Grade 5
   » Threaded Fasteners
• Hardware
• Rivet & Rivet Guns
• Vehicle Lighting
• Electrical Products
• Tubing & Tube Fittings
• Air Brake Products
• Hose & Hose Ends
• Cutting Tools
• Abrasives
• Safety Products &
  Welding Supplies
• Chemicals & Paint
   » MSDS Information
   » CA/OTC Information
• Shop Supplies
• Vehicle Parts &
  Accessories
• Assortments &
  Steel Equipment
   » Assortment Listing

• Online Catalog Index
• Discontinued &
Overstock Specials

Printer-Friendly View

MATERIAL SAFETY DATA SHEET WL30067 SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER WL30067 HMIS CODES Health 1 Flammability 0 Reactivity 0 PRODUCT NAME 3006 Original Formula All Purpose Adhesive Caulk, MANUFACTURER'S NAME EMERGENCY TELEPHONE NO. THE SHERWIN-WILLIAMS CO. (216) 566-2917 Consumer Group - Industrial Cleveland, OH 44115 DATE OF PREPARATION INFORMATION TELEPHONE NO. 12-DEC-01 (216) 566-2902 SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS % by WT CAS No. INGREDIENT UNITS VAPOR PRESSURE -------------------------------------------------------------------------------- No ingredients in this product are hazardous as defined by the Department of Labor. SECTION 3 - HAZARDS IDENTIFICATION ROUTES OF EXPOSURE Exposure may be by INHALATION and/or SKIN or EYE contact, depending on conditions of use. To minimize exposure, follow recommendations for proper use, ventilation, and personal protective equipment. EFFECTS OF OVEREXPOSURE Irritation of eyes, skin and upper respiratory system. In a confined area vapors in high concentration may cause headache, nausea or dizziness. SIGNS AND SYMPTOMS OF OVEREXPOSURE Redness and itching or burning sensation may indicate eye or excessive skin exposure. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE None generally recognized. CANCER INFORMATION For complete discussion of toxicology data refer to Section 11. SECTION 4 - FIRST AID MEASURES If INHALED: If affected, remove from exposure. Restore breathing. Keep warm and quiet. If on SKIN: Wash affected area thoroughly with soap and water. If in EYES: Flush eyes with large amounts of water for 15 minutes. Get medical attention. If SWALLOWED:Do not induce vomiting. Get medical attention immediately. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT LEL UEL Not Applicable N.A. N.A. FLAMMABILITY CLASSIFICATION Not Applicable EXTINGUISHING MEDIA Carbon Dioxide, Dry Chemical, Alcohol Foam UNUSUAL FIRE AND EXPLOSION HAZARDS Closed containers may explode (due to the build-up of pressure) when exposed to extreme heat. SPECIAL FIRE FIGHTING PROCEDURES Full protective equipment including self-contained breathing apparatus should be used. Water spray may be ineffective. If water is used, fog nozzles are preferable. Water may be used to cool closed containers to prevent pressure build-up and possible autoignition or explosion when exposed to extreme heat. SECTION 6 - ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED Remove all sources of ignition. Ventilate and remove with inert absorbent. SECTION 7 - HANDLING AND STORAGE DOL STORAGE CATEGORY Not Applicable PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE Keep container closed when not in use. Transfer only to approved containers with complete and appropriate labeling. Do not take internally. Keep out of the reach of children. SECTION 8- EXPOSURE CONTROLS/PERSONAL PROTECTION PRECAUTIONS TO BE TAKEN IN USE Use only with adequate ventilation. Avoid breathing vapor and spray mist. Avoid contact with skin and eyes. Wash hands after using. This coating may contain materials classified as nuisance particulates (listed "as Dust" in Section 2) which may be present at hazardous levels only during sanding or abrading of the dried film. If no specific dusts are listed in Section 2, the applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3 (total dust), 3 mg/m3 (respirable fraction), OSHA PEL 15 mg/m3 (total dust), 5 mg/m3 (respirable fraction). Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. VENTILATION Local exhaust preferable. General exhaust acceptable if the exposure to materials in Section 2 is maintained below applicable exposure limits. Refer to OSHA Standards 1910.94, 1910.107, 1910.108. RESPIRATORY PROTECTION If personal exposure cannot be controlled below applicable limits by ventilation, wear a properly fitted organic vapor/particulate respirator approved by NIOSH/MSHA for protection against materials in Section 2. When sanding or abrading the dried film, wear a dust/mist respirator approved by NIOSH/MSHA for dust which may be generated from this product, underlying paint, or the abrasive. PROTECTIVE GLOVES Wear gloves which are recommended by glove supplier for protection against materials in Section 2. EYE PROTECTION Wear safety spectacles with unperforated sideshields. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES PRODUCT WEIGHT 8.77 lb/gal 1050 g/l SPECIFIC GRAVITY 1.06 BOILING POINT 212 - 213 F 100 -100 C MELTING POINT Not Available VOLATILE VOLUME 51 % EVAPORATION RATE Slower than ether VAPOR DENSITY Heavier than air SOLUBILITY IN WATER N.A. pH 5.5 VOLATILE ORGANIC COMPOUNDS ( VOC Theoretical) 0.26 lb/gal 31 g/l Less Federally ExemptSolvents 0.13 lb/gal 15 g/l Emitted VOC SECTION 10 - STABILITY AND REACTIVITY STABILITY - Stable CONDITIONS TO AVOID None known. INCOMPATIBILITY None known. HAZARDOUS DECOMPOSITION PRODUCTS By fire: Carbon Dioxide, Carbon Monoxide HAZARDOUS POLYMERIZATION Will not occur SECTION 11 - TOXICOLOGICAL INFORMATION CHRONIC HEALTH HAZARDS No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. TOXICOLOGY DATA CAS No. Ingredient Name SECTION 12 - ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION No data available. SECTION 13 - DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD Waste from this product is not hazardous as defined under the Resource Conservation and Recovery Act (RCRA) 40 CFR 261. Incinerate in approved facility. Do not incinerate closed container. Dispose of in accordance with Federal, State/Provincial, and Local regulations regarding pollution. SECTION 14 - TRANSPORT INFORMATION No data available. SECTION 15 - REGULATORY INFORMATION SARA 313 (40 CFR 372.65C) SUPPLIER NOTIFICATION CAS No. CHEMICAL/COMPOUND % by WT % Element -------------------------------------------------------------------------------- No ingredients in this product are subject to SARA 313 (40 CFR 372.65C) Supplier Notification. CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. TSCA CERTIFICATION All chemicals in this product are listed, or are exempt from listing, on the TSCA Inventory. SECTION 16 - OTHER INFORMATION This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all of the information required by the CPR. The above information pertains to this product as currently formulated, and is based on the information available at this time. Addition of reducers or other additives to this product may substantially alter the composition and hazards of the product. Since conditions of use are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information.