![]() |
![]() |
![]() |
|
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 7600 -- [Back] | |||
|
MSDS 7600 7600: Grease Stick [2]MSDS Last updated: 01/14/2005
MATERIAL SAFETY DATA SHEET
Product: DE-3 Note: The information herein is
given in good faith. No warranty,
expressed or implied, is made.
Printed:
Printed For:
Original Issue Date: 11/08/85 Approved By: Chuck Hiddema
Revision No. 5 Date; 06/22/01 V.P. Technical Operations
SECTION 1 - IDENTIFICATION
Manufacturer; AGS Company
Street Address: 2651 Hoyt Street
City/State/Zip Muskegon Hts., MI 49444
Phone: 800-253-0403
Phone: 231-733-2101
FAX; 231-733-1784
Transportation Emergency; CHEM-TEL
Phone; 800-255-3924
Trade Name: Door-Ease Stick Lubricant
Catalog No.: DE-3
Common Name: Door-Ease
Container/Size: Stick, 1.68 oz.
NFPA - Health: 0
Flammability: 1
Reactivity: 0
Specific Hazard:
HMIS - Health: 0
Flammability: 1
Reactivity: 0
Protective Equipment: A
SECTION II - HAZARDOUS INGREDIENTS
Hazardous Ingredient CAS No. Wgt. % TLV
--------------------------------------------------------------------------------
1 Paraffin Wax 64742-51-4 30-45% 2 cu. M (fume)
2 Petroleum Oil* Not Assigned 30-45% 5 cu. M (mist)
3 Microcrystalline Wax Not Assigned 15-20% Not Assigned
4 Tallow 61790-97-7 5-10% Not Assigned
5 Carnauba Wax 8015-86-9 1-5% Not Assigned
6 Polyethylene 9002-88-4 1-5% Not Assigned
7 Naphthenic acid, zinc salt 12001-85-3 1-5% Not Assigned
8
9
10
NOTES:
· Petroleum oil is severely hydrotreated or solvent refined. It does not require
labeling as a carcinogen.
SECTION III - PHYSICAL DATA
pH - Supplied: Not Determined
pH - Diluted: Not Determined
Water Solubility: Insoluble
Specific Gravity: (Water=1) 0.75
Melting Point: 162 F. ASTM D127
Boiling Point; Not Determined
% Volatiles: Nil
Vapor Pressure: Negligible
Vapor Density: Not Applicable
Evaporation Rate: Not Applicable
Appearance; Tan waxy solid with bland petroleum odor.
SECTION IV FIRE & EXPLOSION DATA
Flash Point: 380ºF.
Method: C.O.C.
Auto Ignition Temperature: Not Determined
Flammable Limits in air: LEL: Not Determined
UEL: Not Determined
Extinguishing Media: Dry chemical, foam, carbon dioxide or water fog
Special Procedures: Wear self-contained breathing apparatus.
Use water fog to minimize vapors in air.
Unusual Hazards; None
SECTION V - REACTIVITY DATA
Unstable and/or Auto Reactive: Stable
Incompatible Materials: Strong oxidizers
Hazardous Decomposition Products: Oxides of carbon and zinc.
SECTION VI - EMERGENCY FIRST AID
Eyes: Flush with water for at least 15 minutes. Consult a physician.
Skin: Wash with soap and water. Get medical attention if adverse
effects arise.
Ingestion; Do not induce vomiting. Consult a physician.
Inhalation; Remove to fresh air. Administer artificial respiration as needed.
SECTION VII - HEALTH EFFECTS
Eyes; May cause irritation.
Skin: In molten state, may cause severe burns.
Ingestion: Not known.
Inhalation: Aspiration or inhalation of fumes or mist may cause respiratory
problems.
Other Effects: Not known.
SECTION VIII - VENTILATION AND PROTECTIVE MEASURES
Ventilation Requirement; Local exhaust when using product in molten state
Eyes: Yes
Gloves: No
Clothing; No
Respiratory: No
Other: Eye wash in work area.
SECTION IX - STORAGE AND HANDLING PROCEDURES
Conditions to Avoid; Avoid excess heat and ignition sources. Store in cool
areas.
SECTION X - SPILL PROCEDURES AND WASTE DISPOSAL
Spill Procedure: Dike area to contain spill. Allow to cool, scrape material
up and place in container for disposal.
Disposal Method: Removal by an approved, licensed waste hauler
EPA Waste I.D. NO.: Not. Reg.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |