MSDS 7568

MSDS DOCUMENT

Product Dynatex(R) 49582 Copper Anti-Seize & Lubricating Compound

1.  Chemical Product and Company Identification
    Trade Name of this Product Dynatex(R) 49582 Copper Anti-Sieze & Lubricating 
    Compound MSDS ID  DYN49582
    Manufacturer                        Phone Number
    Dynatex Inc.                        (270) 769-3385
    350 Ring Road                       Emergency Phone
    Elizabethtown, KY 42701             CHEMTREC  (800) 424-9300
                                        Revision Date  6/25/2005

Health:     1
Fire:       1
Reactivity: 1
Specific  PPE: B

2. Composition and Information Ingredients

Ingredient          CAS Number      Weight %    ACGIH TLV   PEL      STEL
Petroleum oil       64741-96-4      50%-60% 

NJTSRN              Trade Secret    15%-20%        
80100362-5013P

NJTSRN              Trade Secret    15%-20%
80100362-5012P

Copper, as fume or  7440-50-8       5%-10%      1 mg/m     1 mg/m
dust

NJTSRN              Trade Secret    1%-5%
80100362-5004P

Graphite  (natural) 7782-42-5       1%-5%       2.0 mg/m    resp dust 5 mg/m

NJTSRN              Trade Secret    0.5%-1%
80100362-5018P

NJTSRN              Trade Secret    0.5%-1%
80100362-5014P

3. Hazard Identification

   Symptoms of Overexposure
   May cause irritation to eyes and skin on sensitive individuals.

   Existing Conditions Aggravated by Exposure
   Prolonged or repeated contact may produce mild skin irritation and
   inflammation. Personnel with pre-existing skin disorder should avoid
   contact.

4. First Aid Information

   Eye Contact
   Immediately flush eyes with water for at least 15 minutes. Get medical
   attention if irritation develops. 

   Skin Contact
   Wash with soap and water. If irritation occurs, seek medical attention.

   Inhaltion
   Remove to fresh air. If symptoms persist, obtain appropriate 
   medical attention.

   Ingestion
   Do not induce vomiting. Keep warm. Get medical attention.

5. Fire Fighting Measures

   Flash Point          420F
   FP Method            COC

   Extinguishing Media
   Carbon Dioxide, Dry Chemical,Foam

   Hazardous Decomposition Products
   Thermal breakdown of this product druing fire or very high heat 
   conditions may evolve the following hazardous decomposition products:
   Carbon Dioxide
   Carbon Monoxide
   Trace metal oxides

   Special Fire Fighting Procedures
   Fight like a fuel oil fire. Cool fire exposed containers with water
   spray. Fire fighter should wear OSHA/NIOSH approved self-contained
   breathing apparatus.

   Unusual Fire or Explosion Hazards
   None known

6. Accidental Release Measures
   
   Steps to be taken in case of spill or release
   Stop flow, scrape, wipe, mop up or absorb with diatomaceous earth
   or other inert material. 
   Disposal should be in accordance with local, state, and federal regulations.

7. Handling and Storage
   Handling
   Spills may cause slippery floors. Proper footwear required.
   Remove contaminated clothing and launder before reuse.
   Wash hands with soap and water before eating, drinking or smoking.
   Discard contaminated leather gloves and shoes.

   Storage
   Avoid storage near open flame or other sources of ignition.

8. Exposure Controls and Personal Protection

   Eye Protection
   Safety goggles or glasses with side shields are recommended. 

   Skin Protection
   Use neoprene, nitrile, or rubber gloves to prevent skin contact.

   Respiratory Protection
   No special requirements under ordinary conditions of use and with
   adequate ventilation.

   Other Protective Clothing or Equipment
   None under normal use: however, use of solvent resistant aprons or
   other clothing is recommended. Use of chemically resistant boots is
   recommended. 

   Other Precautions
   Have emergency shower and eye wash available.

9. Physical and Chemical Properties

   Physical State           Paste
   Specific Gravity         1.27
   Color/Appearance         Copper color
   Odor                     Petroleum odor
   Boiling/Cond. Point      Not applicable
   Melting/Freezing Point   None
   Solubility               Insoluble in water
   Evaporation Rate         Not applicable
   Percent Volatile         None
   Vapor Density            Not applicable
   Vapor Pressure           Not applicable

   Note
   The above information is not intended for use in preparing product
   specifications. Contact Accumetric LLC before writing specifications.

10. Stability and Reactivity

    Chemical Stability
    Stable

    Hazardous Polymerization
    Will not occur

    Materials to Avoid / Incompatibilities  
    Keep away from strong oxidizing agents. 

    Conditions to Avoid
    Do not heat above flash point.  Do not weld.

11. Toxicological Information

    Carcinogenicity
    This product is not known to be a carcinogen. 

    Sensitizer
    This product is not known to be a sensitizer.

    Mutagenicity
    This product is not known to be a mutagen.

    Teratogenicity
    This product is not known to be a teratogen. 

    Reproductive Toxin
    This product is not known to be a reproductive toxin.

12. Ecological Information

    Environmental Fate and Distribution
    Complete information is not yet available. 

    Environmental Effects
    Complete information is not yet available.

    Fate and Effects in Waste Water Treatment Plants
    Complete information is not yet available.

13. Disposal Considerations

    Waste Disposal Method
    We make no guarantee or warranty of any kind that the use or disposal of
    this product complies with all local, state, or federal laws.  
    It is also the obligation of each user of the product mentioned herein
    to determine and comply with the requirements of all applicable statutes.

    This product is not known to be regulated under RCRA regulations, but
    contains SARA regulated substances. Disposal of unused portions of this
    product and process waste containing this product should be done only
    after a careful evaluation  and in compliance with all federal, local
    and state laws.

14. Transportation Information

15. Regulatory information
    The contents of this MSDS comply with the OSHA Hazard Communication
    Standard 29 CFR 1910.1200.

    TSCA Status
    All chemical substances in this material are included on or exempted
    from listing on the TSCA Inventory of Chemical  Substances. 

    SARA Title III Section 302 Extremely Hazardous Substances. 
    None

    SARA Title III Section 304 CERCLA Hazardous Substances.
    Copper Powder  (7440-50-8)

    SARA Title III Section 313 Toxic Chemicals
    Copper Powder  (7440-50-8)

    California Proposition 65
    This product contains the following chemical(s) listed by the State of
    California under the Safe Drinking Water and Toxic Enforcement Act of 
    1986 (Proposition 65) as being known to cause cancer, birth defects or    
other reproductive harm:
    None known.

    New Jersey
    Copper Powder  (7440-50-8)

    Pennsylvania 
    Graphite Powder  (7782-42-5)
    Copper Powder  (7440-50-8)

16. Other Information

    Disclaimer
    The data contained herein is based upon information that Accumetric
    LLC believes to be reliable. Users of this product have the responsibility
    to determine that suitability of use and to adopt all necessary precautions
    to ensure the safety and protection of property and persons involved
    in said use. All statements to suggestions are made without warranty,
    expressed or implied, regarding the accuracy of the information, the
    hazards connected with the use of the material or the results to be
    obtained from the use therof. 

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.