![]() |
![]() |
![]() |
|
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 7506 -- [Back] | |||
|
MSDS 7506 7506: HH-66 Vinyl Cement 8 Oz. [1]7507: HH-66 Vinyl Cement 32 Oz. [1] 7508: HH-66 Vinyl Cement 16 Oz. [1] MSDS Last updated: 01/28/2010
Material Safety Data Sheet U.S. Department of Labor
May be used to comply with OSHA's Occupational Safety and Health
Hazard Communication Standard, 29 Administration (Non-Mandatory Form)
CFR 1910 1200. Standard must be Form Approved
consulted for specific OMB No. 1218-0072
requirements.
IDENTITY (as Used on Label and Note: Blank spaces are not
List) permitted. If any item is not
HH-66 Vinyl Cement applicable or no information is
available, the space must be marked
to indicate that.
Section I
Manufacturer's name Emergency Telephone Number
R-H Products Co. Inc. 1-800-535-5053
Address (Number, Street, City, Telephone Number for Information
State and ZIP Code)
308 Old High St. 1-978-897-8000
Acton, MA USA 01720 Date Prepared
March 13,2009
Signature of Preparer (optional)
Section II-Hazardous Ingredients/Identity Information
Hazardous (Specific OSHA PEL ACGIH TLV Other Limits By Weight %
Components Chemical Recommended (optional)
Identity,
Common
Name(s))
Methyl CAS# 200 ppm 200 ppm 46%
Ethyl 78-93-3
Ketone
Acetone CAS# 750 ppm 750 ppm 21.5%
67-64-1
Toluene CAS# 100 ppm 100 ppm 50 ppm Skin 19%
108-88-3
Toluene and Methyl Ethyl Ketone are subject to the reporting
requirements of section 313 of SARA Title III.
OSHA Hazard-Flammable, Irritant
DOT Information: UN 1133, ADHESIVES, 3, PGII (option: Consumer
Commodity, ORM-D)ERG#128
HMIS Ratings: Health-1; Flammability-3; Reactivity-0
NFPA Rating: Health-2; Flammability-3; Reactivity-0
Key: 4-Extreme 3-High 2-Moderate 1-Slight
Abbreviations used in N/D- not determined N/A- not applicable
MSDS:
Regulated V.O.C.'s 4.7 lbs/Gal (4.62 average)-554 g/l
Section III-Physical/Chemical Characteristics
Boiling Point 132 F Specific Gravity .87-.88
Acetone (H2O=1)
Vapor Pressure 180 mm Melting Point N/D
(mm Hg) at 68 F
Vapor Density Heavier Evaporation Rate Slower
(AIR=1) (Butyl Acetate=1)
Solubility in Insoluble in
Water water
Appearance and Clear liquid; aromatic odor with sharp mint like
Odor fragrance
Section IV-Fire and Explosion Hazard Data
Flash Point (Method Used) -5.5C (22F) ASTM D-56 9/21/2008
Flammable Limits LEL 1% UEL 12%
Extinguishing Media FOAM, DRY CHEMICAL, CO2
Special Fire Fighting Procedures Fire Fighters should be equipped
with self-contained breathing
apparatus when fighting fires
involving this material.
Unusual Fire and Explosion Hazards Extremely Flammable. Overheated,
closed container near a fire could
explode due to pressure buildup.
Section V-Reactivity Data
Stability Unstable Conditions to
Avoid
Stable X N/A
Incompatibility (Materials to Strong Oxidizing Agents
Avoid)
Hazardous Decomposition or CO2 and CO when subjected to flames
Byproducts or excessive heat
Hazardous May Occur Conditions to
Polymerization Avoid
Will Not Occur X N/A
Section VI-Health Hazard Data
Route(s) of Entry Inhalation? Skin? Ingestion?
Primary Yes Yes Yes
Health Hazards (Acute and Chronic)
Eyes-Liquid mildly irritating. Overexposure may also cause irritation.
Skin-Prolonged contact can cause irritation and possible dermatitis.
Breathing-Overexposure may cause irritation to respiratory system.
Extreme overexposure to vapors could result in central nervous system,
liver and kidney damage. Ingestion-May cause gastrointestinal
irritation.
Carcinogenicity None (No)
NTP? N/A
IARC Monographs? N/A
OSHA Regulated? N/A
Signs and symptoms of Exposure
Eyes-Redness, tearing and swelling. Skin- Dryness of skin including
cracking. Breathing- Overexposure includes dizziness, headache, nausea,
and light headedness. Swallowing-Nausea, vomiting, and diarrhea
Medical Conditions Generally
Aggravated by Exposure
Skin-Prolonged contact will irritate and may cause dermatitis.
Breathing-Extreme overexposure of Toluene vapors may cause nervous
system damage.
Swallowing-May cause nausea, vomiting and diarrhea. Aspiration into the
lungs as a result of vomiting may cause lung damage. Emergency and First
Aid Procedures. Eye Contact-
Flush immediately with water. Call a physician. Skin Contact-
Wash area with soap and water. Breathing-
Move affected person to fresh air at once. Restore breathing. Call a
physician if difficulties persist. If swallowed-DO NOTINDUCE VOMITING.
Call a physician. Give water to victim. If vomiting occurs, prevent
aspiration into lungs by lowering head between knees.
Section V11-Precautions for Safe Handling and Use
Steps to Be Taken in Case Material Extinguish all sources of ignition
is Released or Spilled in area. Collect spilled material
and place in a closed container for
disposal or salvage.
Waste Disposal Method Dispose in accordance with local
and current U.S. E.P.A.
regulations.
U.S. E.A.P. Hazardous Waste D035 (Ignitable) (MEK-1/91)
Number:
Precautions to Be Taken in Handling Keep away from heat; open flames
and Storing and sparks. Use and store with
adequate ventilation to prevent
vapor buildup. Vapors released by
product can easily ignite.
Other Precautions Avoid contact with skin and eyes.
Avoid prolonged breathing of
vapors. Keep container closed when
not in use. KEEP OUT OF THE REACH
OF CHILDREN
Section VII- Control Measures
Respiratory Protection (Specify If exposure exceeds occupational
Type) exposure limits use a NIOSH
approved respirator to prevent
overexposure. Per 29 CFR 1910.134
CCROV or SA types recommended.
Ventilation
Local Exhaust Should be used to maintain exposure
below TLV(s)
Special Explosion proof ventilation maybe
required to control vapor
concentrations.
Mechanical (General) Should be used to maintain exposure
below TLV(s)
Other N/D
Protective Gloves Impervious gloves; (for Solvent)
Eye Protection chemical goggles or safety glasses
Other Protective Clothing or Work apron to avoid contact with
Equipment personal clothing and skin.
Work/Hygienic Practices Keep area clean. Wash hands
thoroughly after working with
product.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |