MSDS Sheet 6629

• All Products
• Fasteners
   » Grade 8
   » Grade 5
   » Threaded Fasteners
• Hardware
• Rivet & Rivet Guns
• Vehicle Lighting
   » Cross Reference
• Electrical Products
• Tubing & Tube Fittings
• Air Brake Products
• Hose & Hose Ends
• Cutting Tools
• Abrasives
• Safety Products &
  Welding Supplies
• Chemicals & Paint
   » MSDS Information
   » CA/OTC Information
• Shop Supplies
• Vehicle Parts &
  Accessories
• Assortments &
  Steel Equipment
   » Assortment Listing

• Online Catalog Index
• Discontinued &
Overstock Specials

MSDS Document Product Dynatex® 49595 White Lithium Grease 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Trade Name of this Product - Dynatex® 49595 White Lithium Grease MSDS ID DYN49595 MANUFACTURER PHONE NUMBER Dynatex Inc. (270) 769-3385 350 Ring Road EMERGENCY PHONE Elizabethtown, KY 42701 CHEMTREC (800) 424-9300 Revision Date: 6/8/2005 Fire 1 Health 0 Reactivity 0 Specific PPE: B 2. COMPOSITION AND INFORMATION ON INGREDIENTS INGREDIENT CAS # WEIGHT % ACGIH TLV PEL STEL Petroleum 64742-65-0 70-100% 0 distillates, solvent dewaxed heavy paraffinic Distillates, 64742-54-7 70-100% 5 mg/m3 5 mg/m3 10 mg/m3 hydrotreated heavy paraffinic Zinc Oxide 1314-13-2 1-5% 2 mg/m dust 5 mg/m dust 10 mg/m 3. HAZARD IDENTIFICATION PRIMARY ROUTES OF ENTRY Eye contact, skin contact. EYE CONTACT May cause eye irritation SKIN CONTACT May cause skin irritation EXISTING CONDITIONS AGGRAVATED BY EXPOSURE No known applicable information. 4. FIRST AID INFORMATION EYE CONTACT Immediately flush eyes with water for at least 15 minutes. Get medical attention if irritation develops. SKIN CONTACT Wash affected area thoroughly with soap and water. Remove contaminated clothing and launder before re-use. Get medical attention if irritation develops. INHALATION Vapor inhalation under ambient conditions is normally not a problem. If overcome by vapor from hot product, immediately remove from exposure and seek medical attention. If breathing has stopped, start resuscitation; administer oxygen if breathing is irregular. If overexposed to oil, remove from further exposure until excessive mist conditions subside. INGESTION DO NOT INDUCE VOMITING. Seek medical attention. 5. FIRE FIGHTING MEASURES Flash Point 475F Lowest Oil FP Method COC LEL 0.9 UEL 7 EXTINQUISHING MEDIA Use water spray, dry chemical, foam or carbon dioxide. Water or foam may cause frothing. Use water to keep fire-exposed containers cool. Water spray may be used to flush spills away from exposure. Minimize breathing gases, vapor, fumes or decomposition products. Use supplied-air breathing equipment for enclosed or confined spaces, or as otherwise needed. UNUSUAL FIRE OR EXPLOSION HAZARDS Pressure will increase in over-heated, closed containers. SPECIAL FIRE FIGHTING PROCEDURES Self-contained breathing apparatus and protective clothing should be worn when fighting fires involving chemicals. 6. ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE OF SPILL OR RELEASE Recover free product. Add sand, earth or other suitable absorbent to spill area. Minimize skin contact. Keep product out of sewers and watercourses by diking or impounding. Advise authorities if product has entered or may enter sewers, watercourses or extensive land areas. Assure conformity with applicable governmental regulations. Spilled material, unused contents and empty containers must be disposed of in accordance with local, state and federal regulations. 7. HANDLING AND STORAGE HANDLING Do not store or mix with strong oxidizers. Avoid eye contact. STORAGE Do not store sealed container near extreme heat. Do not reuse container. PRECAUTIONARY MEASURES Always wash hands well before touching face or eating. 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION EYE PROTECTION Use splash goggles or face shield when eye contact may occur. SKIN PROTECTION Use chemical resistant gloves, if needed, to avoid prolonged or repeated skin contact. RESPIRATORY PROTECTION No special requirements under ordinary conditions of use and with adequate ventilation. OTHER PROTECTIVE EQUIPMENT Use chemical-resistant apron or other impervious clothing, if needed, to avoid contaminating regular clothing, which could result in prolonged or repeated skin exposure. 9. PHYSICAL AND CHEMICAL PROPERTIES Specific Gravity 0.89 Color/Appearance White Odor Mild, bland petroleum odor Boiling/Cond. Point Not applicable Melting/Freezing Point Not determined Solubility Negligible in water Evaporation Rate <0.1 (butyl alcohol=1) Vapor Density >5 (air=1) Vapor Pressure <0.1 mm Hg @ 20C NOTE: The above information is not intended for use in preparing product specifications. Contact Accumetric LLC before writing specifications. 10. STABILITY AND REACTIVITY CHEMICAL STABILITY Stable HAZARDOUS POLYMERIZATION Will not occur MATERIAL TO AVOID Strong oxidants such as liquid chlorine, concentrated oxygen, sodium hypochlorite or calcium hypochlorite. 11. TOXICOLOGICAL INFORMATION COMPONENT TOXICOLOGY INFORMATION No known applicable information. SPECIAL HAZARD INFORMATION ON COMPONENTS No known applicable information. 12. ECOLOGICAL INFORMATION ENVIRONMENTAL FATE AND DISTRIBUTION Complete information is not yet available. ENVIRONMENTAL EFFECTS Complete information is not yet available. FATE AND EFFECTS IN WASTE WATER TREATMENT PLANTS Complete information is not yet available. 13. DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD We make no guarantee or warranty of any kind that the user or disposal of this product complies with all local, state, or federal laws. It is also the obligation of each user of the product mentioned herein to determine and comply with the requirements of all applicable statutes. This product is not known to be regulated under RCRA regulations. Disposal of unused portions of this product and process waste containing this product should be done only after a careful evaluation and in compliance with all federal, local and state laws. 14. TRANSPORTATION INFORMATION DOT ROAD SHIPMENT INFORMATION Not subject to DOT. 15. REGULATORY INFORMATION The contents of this MSDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200. TSCA STATUS All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances. CALIFORNIA PROPOSITION 65 This product contains the following chemical(s) listed by the State of California under the Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause cancer, birth defects or other reproductive harm: None known SARA TITLE III SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES None SARA TITLE III SECTION 304 CERCLA HAZARDOUS SUBSTANCES None SARA TITLE III SECTION 313 TOXIC CHEMICALS None present or none present in regulated quantities. 16. OTHER INFORMATION DISCLAIMER The data contained herein is based upon information that Accumetric LLC believes to be reliable. Users of this product have the responsibility to determine that suitability of use and to adopt all necessary precautions to ensure the safety and protection of property and persons involved in said use. All statements to suggestions are made without warranty, expressed or implied, regarding the accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.