Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 6616 -- [Back] | |||
|
MSDS 6616 6616: M1 Moly Chain & Cable Lube [12]6616-1: M1 Moly Chain & Cable Lube [6] MSDS Last updated: 09/04/2009
Claire
MATERIAL SAFETY DATA SHEET
1. Product and Company Identification
Product number 291
Product name Moly Chain & Cable
Effective date 31-Mar-2009
Company information Sprayway, Inc.
484 Vista Ave.
Addison, IL 60101 United States
Company phone General Assistance 1-630-628-3000
Emergency telephone US 800-424-9300
Emergency telephone outside US 703-527-3887
Version # 04
Supersedes date 06-Dec-2007
2. Hazards Identification
Emergency overview FLAMMABLE
CONTENTS UNDER PRESSURE. Aerosol. Pressurized
container may explode when exposed to heat or flame.
Harmful in contact with eyes. Prolonged exposure may
cause chronic effects.
Potential health effects
Routes of exposure Inhalation. Ingestion. Skin contact. Eye contact.
Eyes Contact may irritate or burn eyes. Eye contact may
result in corneal injury.
Skin Prolonged or repeated contact can result in
defatting and drying of the skin which may result in
skin irritation and dermatitis (rash).
Inhalation Intentional misuse by concentrating and inhaling the
product can be harmful or fatal. Prolonged
inhalation may be harmful.
Ingestion Exposure by ingestion of an aerosol is unlikely. May
cause delayed lung damage. Components of the product
may be absorbed into the body by ingestion.
Target organs Kidney. Central nervous system. Lungs.
Chronic effects Conjunctiva. Kidney injury may occur. May cause
central nervous system disorder (e.g., narcosis
involving a loss of coordination, weakness, fatigue,
mental confusion, and blurred vision) and/or damage.
May cause delayed lung damage.
3. Composition / Information on Ingredients
Components CAS# Percent
Heavy Paraffinic Petroleum Distillate 64741-88-4 70-80
Propane 74-98-6 10-15
Mineral Spirits (64742-47-8 / 8052-41-3) Mixture 3-5
Stoddard Solvent 8052-41-3 1-3
Non-hazardous and other components below reportable levels 2.5-10
4. First Aid Measures
First aid procedures
Eye contact Immediately flush eyes with plenty of water for at
least 15 minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Get medical
attention immediately.
Skin contact Immediately take off all contaminated clothing. Wash
off with warm water and soap. Get medical attention if
irritation develops or persists.
Inhalation Move to fresh air. Oxygen or artificial respiration if
needed. Do not use mouth-to-mouth method if victim
inhaled the substance. Induce artificial respiration
with the aid of a pocket mask equipped with a one-way
valve or other proper respiratory medical device. Get
medical attention immediately.
Ingestion If material is ingested, immediately contact a poison
control center. Rinse mouth. Do not induce vomiting
without advice from poison control center. If vomiting
occurs naturally, have victim lean forward to reduce
risk of aspiration. Do not use mouth-to-mouth method
if victim ingested the substance. Induce artificial
respiration with the aid of a pocket mask equipped
with a one-way valve or other proper respiratory
medical device.
5. Fire Fighting Measures
Flammable properties Vapor or gas may spread to distant ignition
sources and flash back. Runoff to sewer may
cause fire or explosion hazard. Containers may
explode when heated.
Extinguishing media
Suitable extinguishing media Water. Water spray. Water fog. Dry chemical.
Carbon dioxide (CO2).
Protection of firefighters
Protective equipment and In the event of fire and/or explosion do not
precautions for firefighters breathe fumes. Wear full protective clothing,
including helmet, self-contained positive
pressure or pressure demand breathing
apparatus, protective clothing and face mask.
Containers should be cooled with water to
prevent vapor pressure build up. For massive
fire, use unmanned hose holders or monitor
nozzles; if this is impossible, withdraw from
area and let fire burn. Cool containers with
flooding quantities of water until well after
fire is out.
6. Accidental Release Measures
Methods for containment Eliminate all ignition sources (no smoking,
flares, sparks, or flames in immediate area). Stop
leak if you can do so without risk. Move the
cylinder to a safe and open area if the leak is
irreparable. Stop the flow of material, if this is
without risk. Use water spray to reduce vapors or
divert vapor cloud drift. Prevent entry into
waterways, sewers, basements or confined areas.
Methods for cleaning up Should not be released into the environment. Use a
non-combustible material like vermiculite, sand or
earth to soak up the product and place into a
container for later disposal.
Small Spills: Wipe up with absorbent material
(e.g. cloth, fleece). Clean contaminated surface
thoroughly. After removal flush contaminated area
thoroughly with water.
7. Handling and Storage
Handling Pressurized container: Do not pierce or burn, even after
use. Do not handle or store near an open flame, heat or
other sources of ignition. Use only in area provided with
appropriate exhaust ventilation. Do not use if spray
button is missing or defective. Do not get this material
in contact with eyes. Do not get this material in contact
with skin. Avoid prolonged exposure.
Storage Level 1 Aerosol.
Level 3 Aerosol.
Contents under pressure. Do not puncture, incinerate or
crush. The pressure in sealed containers can increase
under the influence of heat. Keep away from heat, sparks,
and flame. Avoid exposure to long periods of sunlight.
Store in cool place. Keep in an area equipped with
sprinklers. Keep out of the reach of children. Do not
store, incinerate, or heat this material above 120
degrees Fahrenheit.
8. Exposure Controls / Personal Protection
Exposure Limits
ACGIH
Components CAS# TWA STEL Ceiling
Propane 74-98-6 1000 ppm Not established Not established
Mineral Spirits Mixture 100 ppm Not established Not established
(64742-47-8/8052-41-3)
Stoddard Solvent 8052-41-3 100 ppm Not established Not established
OSHA
Components CAS# TWA STEL Ceiling
Propane 74-98-6 1000 ppm Not established Not established
Mineral Spirits Mixture 500 ppm Not established Not established
(64742-47-8/8052-41-3)
Stoddard Solvent 8052-41-3 500 ppm Not established Not established
Personal protective equipment
Eye/face protection Wear chemical goggles.
Skin protection Wear appropriate chemical resistant gloves. Wear
appropriate chemical resistant clothing.
Respiratory protection Wear positive pressure self-contained breathing
apparatus (SCBA). If permissible levels are exceeded
use NIOSH mechanical filter / organic vapor
cartridge or an air-supplied respirator.
9. Physical & Chemical Properties
Appearance Compressed liquefied gas.
Boiling point 523.4 °F (272.8 °C) estimated
Color Black
Flammability (HOC) 42.7339 kJ/g estimated
Flash back No
Flash point -156 °F (-104.4 °C) estimated
Form Aerosol
Odor Solvent
pH Not applicable
Physical state Liquid
Pressure 65 - 75 psig @ 70F
Solubility Negligible
Specific gravity 0.7908 estimated
10. Chemical Stability & Reactivity Information
Chemical stability Risk of ignition
Conditions to avoid Heat, flames and sparks
Hazardous decomposition products No hazardous decomposition products
are known
11. Toxicological Information
Acute effects Acute LD50: 2606 mg/kg estimated, Rat, Dermal
Sensitization Not expected to be hazardous by OSHA criteria.
Reproductive effects Not expected to be hazardous by OSHA criteria.
Teratogenicity Not expected to be hazardous by OSHA criteria.
12. Ecological Information
Ecotoxicity Components of this product have been identified as
having potential environmental concerns.
LC50 233 mg/L estimated, Fish, 96.00 Hours,
EC50 995 mg/L estimated, Daphnia, 48.00 Hours,
IC50 2977 mg/L estimated, Algae, 72.00 Hours,
13. Disposal Considerations
Waste codes D001: Waste Flammable material with a flash
point <140 F
Disposal instructions Contents under pressure. Dispose of this
material and its container at hazardous or
special waste collection point. Do not
incinerate sealed containers. Do not allow
this material to drain into sewers/water
supplies. If discarded, this product is
considered a RCRA ignitable waste, D001.
Dispose in accordance with all applicable
regulations.
14. Transport Information
Department of Transportation (DOT) Requirements
Basic shipping requirements:
Proper shipping name Consumer commodity
Hazard class ORM-D
Subsidiary hazard class None
Additional information:
Packaging exceptions 156, 306
Packaging non bulk 156, 306
Packaging bulk None
IMDG
Basic shipping requirements:
Proper shipping name AEROSOLS
Hazard class 2.1
UN number 1950
Additional information:
Packaging exceptions LTD QTY
Item 5F
Labels required None
Transport Category 2
IATA
Basic shipping requirements:
Proper shipping name Aerosols, flammable
Hazard class 2.1
UN number 1950
Additional information:
Packaging exceptions LTD QTY
Labels required 2.1
15. Regulatory Information
US federal regulations This product is a "Hazardous Chemical" as
defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
Occupational Safety and Health Administration (OSHA)
29 CFR 1910.1200 hazardous
chemical Yes
CERCLA (Superfund) reportable quantity
None
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate Hazard - Yes
Delayed Hazard - Yes
Fire Hazard - Yes
Pressure Hazard - Yes
Reactivity Hazard - No
Section 302 extremely
hazardous substance No
Section 311 hazardous chemical Yes
Inventory status
Country(s) or region Inventory name On inventory (yes/no)*
China Inventory of Existing No
Chemical Substances in
China (IECSC)
Europe European Inventory of New No
and Existing Chemicals
(EINECS)
Europe European List of Notified No
Chemical Substances
(ELINCS)
Japan Inventory of Existing and No
New Chemical Substances
(ENCS)
Korea Existing Chemicals List No
(ECL)
United States & Puerto Rico Toxic Substances Control Yes
Act (TSCA) Inventory
A "Yes" indicates that all components of this product comply with the inventory
requirements administered by the governing country(s)
State regulations
U.S. - Pennsylvania - RTK (Right to Know) List
Heavy Paraffinic Petroleum 64741-88-4 Present
Distillate
Propane 74-98-6 Present
Stoddard Solvent 8052-41-3 Present
16. Other Information
Further information HMIS® is a registered
trade and service mark of the NPCA
HMIS ratings Health: 2*
Flammability: 4
Physical hazard: 0
Disclaimer The information provided in this Safety Data
Sheet is correct to the best of our knowledge,
information and belief at the date of its
publication. The information given is designed
only as a guidance for safe handling, use,
processing, storage, transportation, disposal
and release and is not to be considered a
warranty or quality specification. The
information relates only to the specific
material designated and may not be valid for
such material used in combination with any
other materials or in any process, unless
specified in the text.
MSDS sections updated This document has undergone significant
changes and should be reviewed in its
entirety.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
