MSDS 6611-4

Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: 813-248-0585


                     Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name:             SLIK PAK 5TH WHEEL GREASE 350 2OZ
Item No:                  01020
Product Type:             Lubricant

2. COMPOSITION/INFORMATION ON INGREDIENT
Component                     Weight%          ACGIH; TLV-TWA        OSHA PEL:
LITHIUM-CALCIUM PETROLEUM     >60              Not Listed           Not Listed
GREASE BLEND
MIXTURE

GRAPHITE                      <30              2 mg/m3               15 mppcf
7782-42-5                                      (respir)ACGIH         TWA
                                                
MOLYBDENUM DISULFIDE          <5               10 mg/m3              15 mg/m3
1317-33-5                                      (inhalable)        (as insoluble
                                               3 mg/m3             molybdenum)
                                              (resp. as insoluble
                                              molybdenum)

SILICA, QUARTZ                0.1-1.0         0.05 mg/m3          0.1 mg/m3
14808-60-7                                                        TWA
                                                                  respirable


3. HAZARDS IDENTIFICATION
Toxicity:        May cause eye and skin irritation. If ingested, will           
                 irritate esophagus and stomach. May irritate respiratory
                 system upon frequent or prolonged use. This product contains   
                 encapsulated silicon dioxide (quartz silica).
                 No exposure to free respirable silica is anticipated during    
                 normal use of this product. Silica may be released by grinding 
                 or machining of coated material. Use NIOSH-approved dust/mist  
               respirator when grinding or machining.
Primary Routes of Entry:   Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure:  Overexposure may cause eye and skin redness.   
                 Ingestion may cause cramps or diarrhea. Based on
                 testing, this product is not likely to be an inhalation hazard 
                 and is considered to have a low order of acute toxicity.

Component          Weight%          NTP       ACGIH Carcinogens       IARC
SILICA, QUARTZ     0.1-1.0                    A2 - Suspected         Group 1:
14808-60-7                                    Human Carcinogen       Monograph  
                                                                    68, 1997

Medical Conditions Recognized as   Preexisting pulmonary and dermatological
Being Aggravated by Exposure:      disorders.

4. FIRST AID MEASURES
Ingestion:           Do not induce vomiting. Slowly dilute with 1-2 glasses of
                     water or milk and seek medical attention. Never
                     give anything by mouth to an unconscious person.
Inhalation:          Move to fresh air in case of accidental inhalation of 
                     vapors.
Skin Contact:        Wash off immediately with soap and plenty of water
                     removing all contaminated clothes and shoes. If skin
                     irritation persists, call a physician.
Eye Contact:         In case of contact, immediately flush eyes with plenty of
                     water for at least 15 minutes and get medical
                     attention if irritation persists.


5. FIRE FIGHTING MEASURES
Flash Point °F(C°):     380 degrees F.  COC
Recommended Extinguishing Media: Carbon dioxide, Dry chemical, foam
Special Fire-Fighting Procedures:  Use water to cool exposed containers. Water
                        stream directed into fire may cause frothing with       
                 subsequent spread of flame. Firefighters should wear
                        self-contained breathing apparatus.
Hazardous Products of Combustion:   Oxides of carbon
Unusual Fire/Explosion Hazards:     None
                                  
Lower Explosive Limit:        Not determined
Upper Explosive Limit:        Not determined

6. ACCIDENTAL RELEASE MEASURES
Spill Procedures: Absorb spill or leak with sand or cloth.Sweep or shovel into
                  an appropriate waste container until disposal.
                  Prevent from entering waterways or sewers.


7. HANDLING AND STORAGE
Storage:          Store away from heat.
Handling:         Avoid prolonged skin contact. Keep away from eyes. Wash
                  hands and face after handling this compound.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Eyes:             Safety glasses.
Skin:             Neoprene or nitrile gloves recommended.
Ventilation:      General; local exhaust ventilation as necessary to control
                  any air contaminants to within their exposure
                  limits (or to the lowest feasible levels when limits have
                  not been established) during the use of this product.
Respiratory Protection: Not required under normal use. In case of insufficient
                  ventilation, wear suitable respiratory equipment.


9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:               Black semi-solid
Odor:                     Mild petroleum odor
Boiling Point:            Not determined.
pH:                       Does not apply
Solubility in Water:      Nil
Specific Gravity:         1.0
VOC Content(Wt.%):        None
Vapor Pressure:           Not determined
Vapor Density (Air=1):    >1 (air = 1)
Evaporation Rate:         Negligible

10. STABILITY AND REACTIVITY
Chemical Stability:                  Stable at normal conditions
Hazardous PolymerizatioN:            WILL NOT OCCUR.
Incompatabilities:                   Strong oxidizers
Conditions to Avoid:                 Heat
Hazardous Products of Combustion:    Oxides of carbon

11. TOXICOLOGICAL INFORMATION
See Section 3

12. ECOLOGICAL INFORMATION
No data available

13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Dispose of in accordance with local, state and
federal regulations.
US EPA Waste Number:      NH - Not a RCRA Hazardous Waste Material


14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Domestic Ground Transport
       DOT Shipping Name:   Unrestricted
       Hazard Class:        None
       UN/ID Number:        None
       Marine Pollutant:    None
       
IATA
       Proper Shipping Name:   Not regulated
       Class of Division:      None
       UN/ID Number:           None           
        
IMDG
       Proper Shipping:        Unrestricted
       Hazard Class:           None
       UN Number:              None
      
15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313
Toxic Chemical.

NONE

CALIFORNIA PROP 65:
No California Prop 65 chemicals are known to be present at or above the No
Significant Risk Level.

TSCA Inventory Status:
Listed on Inventory: YES All components of this product are listed (or exempt)
on the EPA TSCA inventory.

16. OTHER INFORMATION
Estimated NFPA Rating:            HEALTH 1, FLAMMABILITY 1 , REACTIVITY 0.
Estimated HMIS Classification:    HEALTH 1, FLAMMABILITY 1, PHYSICAL HAZARD 0
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.



Prepared By:    Denise Boyd, Manager-Environmental, Health & Safety
                Revision Date: May/14/2008
Company:        Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 06106         
                Revision          5      
                Number:                   
Telephone No:   1-87-Permatex (877) 376-2839



                            

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2010 Imperial Supplies LLC Questions or comments? Contact us.