Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 6608 -- [Back] | |||
|
MSDS 6608 6608: L1 Lubricant Protectant [12]6608-1: L1 Lubricant Protectant [6] MSDS Last updated: 10/29/2009
MATERIAL SAFETY DATA SHEET
1. Product and Company Identification
Product number 288
Product name L1 LUBRICANT PROTECTANT 15 OZ
Effective date 14-Nov-2007
Company information SPAYWAY, INC.
484 VISTA
ADDISON, IL 60101 United States
Company phone General Assistance 1-630-628-3000
Emergency telephone US 800-424-9300
Emergency telephone outside US 703-527-3887
Version # 4.0
Supersedes date 07-Aug-2007
2. Hazards Identification
Emergency overview FLAMMABLE
CONTENTS UNDER PRESSURE.
Aerosol. Pressurized container may explode
when exposed to heat or flame.
Harmful in contact with eyes. May be harmful
if absorbed through skin. Prolonged exposure
may cause chronic effects.
OSHA regulatory status This product is considered hazardous under 29
CFR 1910.1200 (Hazard Communication).
Potential health effects
Routes of exposure Skin contact. Inhalation. Eye contact.
Eyes Contact may irritate or burn eyes. Eye contact
may result in corneal injury.
Skin Prolonged or repeated contact can result in
defatting and drying of the skin which may
result in skin irritation and dermatitis
(rash).
Inhalation Intentional misuse by concentrating and
inhaling the product can be harmful or fatal.
Prolonged inhalation may be harmful.
Ingestion Exposure by ingestion of an aerosol is
unlikely. Ingestion may cause gastrointestinal
irritation, nausea, vomiting and diarrhea. May
cause delayed lung damage.
Target organs Kidney.
2- Butoxy ethanol may be absorbed through the
skin in toxic amounts if contact is repeated
and prolonged and may cause blood damage. These
effects have not been observed in humans.
Blood. Central nervous system. Liver.
Respiratory system.
Chronic effects Unconsciousness. Conjunctiva. Liver injury may
occur. Kidney injury may occur. May cause
central nervous system disorder (e.g.,
narcosis involving a loss of coordination,
weakness, fatigue, mental confusion, and
blurred vision) and /or damage. May cause
delayed lung damage.
Signs and symptoms Discomfort in chest. Corneal damage. Narcosis.
Cyanosis. Liver enlargement. Jaundice.
Conjunctivitis. Defatting of the skin.
Irritation.
3. Composition/Information on Ingredients
Components CAS# Percent
Mineral Spirits 64742-48-9 20-30
Propane 74-98-6 8-10
2-Butoxyethanol 111-76-2 8-10
Non-hazardous and other components below reportable levels 40-60
4. First Aid Measures
First aid procedures
Eye contact Immediately flush eyes with plenty of water for at
least 15 minutes. Remove contact lenses, if present
and easy to do. Get medical attention immediately.
Skin contact Immediately flush skin with plenty of water. Remove
and isolate contaminated clothing and shoes. Get
medical attention immediately. Wash clothing
separately before reuse.
Inhalation Move to fresh air. Oxygen or artificial respiration
if needed. Do not use mouth-to-mouth method if
victim inhaled the substance. Induce artificial
respiration with the aid of a pocket mask equipped
with a one-way valve or other proper respiratory
medical device.
Ingestion Do not induce vomiting without medical advice. If
vomiting occurs naturally, have victim lean forward
to reduce risk of aspiration. Do not use
mouth-to-mouth method if victim ingested the
substance. Induce artificial respiration with the
aid of a pocket masks equipped with a one-way valve
or other proper respiratory medical device.
Notes to physician Symptoms may be delayed.
General advice Immediate medical attention is required.
5. Fire Fighting Measures
Flammable properties Containers may explode when heated.
Vapor or gas may spread to distant
ignition sources and flash back.
Extinguishing media
Suitable extinguishing media Water. Water spray. Water fog.
Alcohol foam. Dry chemical. Carbon
dioxide (CO2).
Unsuitable extinguishing media Does not use a solid water stream
as it may scatter and spread fire.
Protection of firefighters
Protective equipment and In the event of fire and /or
precautions for firefighters explosion do not breathe fumes.
Wear full protective clothing.
Including helmet, self-contained
positive pressure or pressure
demand breathing apparatus,
protective clothing and face mask.
Containers should be cooled with
water to prevent vapor pressure
build up. For massive fire, use
unmanned hose holders or monitor
nozzles; if this is impossible,
withdraw from area and let fire
burn. Cool containers with flooding
quantities of water until well
after fire is out.
6. Accidental Release Measures
Personal precautions Ensure adequate ventilation. Do not touch
damaged containers or spilled material unless
wearing appropriate protective clothing.
Ventilate closed spaces before entering. Keep
unnecessary personnel away.
Methods for containment Eliminate all ignition sources (no smoking,
flares, sparks, or flames in immediate area).
Stop leak if you can do so without risk. Move
the cylinder to a safe and open area if the
leak is irreparable. Use water spray to
reduce vapors or divert vapor cloud drift.
Methods for cleaning up Small Spills: Wipe up with absorbent material
(e.g. cloth, fleece). Clean contaminated
surface thoroughly. After removal flush
contaminated area thoroughly with water.
7. Handling and Storage
Handling Pressurized container. Do not pierce or burn, even
after use. Do not handle or store near an open
flame, heat or other source of ignition. Do not use
if spray button is missing or defective. Use only
with adequate ventilation. Do not get this material
in contact with eyes. Do not get this material in
contact with skin. Avoid prolonged exposure.
Storage Level 3 Aerosol.
Contents under pressure. Do not puncture, incinerate
or crush. The pressure in sealed containers can
increase under the influence of heat. Avoid exposure
to long periods of sunlight. Keep in an area
equipped with sprinklers. Keep out of the reach of
children. Use care in handling/storage.
8. Exposure Controls/Personal Protection
Exposure limits
ACGIH
Components CAS # TWA STEL Ceiling
Mineral Spirits 64742-48-9 100 ppm Not established Not established
Propane 74-98-6 1000 ppm Not established Not established
2-Butoxyethanol 111-76-2 20 ppm Not established Not established
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate Hazard-Yes
Delayed Hazard-Yes
Fire Hazard-Yes
Pressure Hazard-Yes
Reactivity Hazard-No
Section 302 extremely hazardous substance No
Section 311 hazardous chemical Yes
Inventory status
Country(s) or region Inventory name On inventory (yes/no)*
China Inventory of Existing Chemical
Substances in China (IECSC) No
Europe European Inventory of new and
Existing Chemicals (EINECS) No
Europe European List of Notified Chemical
Substances (ELINCS) No
Japan Inventory of Existing and New Chemical
Substances (ENCS) No
Korea Existing Chemicals List (ECL) No
United States & Puerto Rico Toxic Substances Control Act (TSCA) Yes
Inventory
A "Yes" indicates that all components of this product comply with the inventory
requirements administered by the governing country(s)
State regulations
U.S.-Pennsylvania-RTK (Right to Know) List
2-Butoxyethanol 111-76-2 Present
Propane 74-98-6 Present
16. Other information
HMIS ratings Health 1*
Flammability: 4
Physical hazard: 0
Prepared by Regulatory Compliance
Disclaimer The information provided in this Safety Data
Sheet is correct to the best of our knowledge,
information and belief at the date of its
publication. The information given is designed
only as guidance for safe handling, use,
processing, storage, transportation, disposal and
release and is not to be considered a warranty or
quality specification. The information relates
only to the specific material designated and may
not be valid for such material used in
combination with any other materials or in any
process, unless specified in the text.
Issue Date 14-Nov-2007
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
