Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 6604 -- [Back] | |||
|
MSDS 6604 6604: White Grease - 1 Lb Tub [1]MSDS Last updated: 08/25/2003
MATERIAL SAFETY DATA SHEET
MANUFACTURERS NAME: PENNZOIL PRODUCTS COMPANY
MANUFACTURERS ADDRESS: P.O. BOX 2967
CITY, STATE, ZIP: HOUSTON TX 77252-2967
EMERGENCY PHONE: 1-800-546-6040
PART #: 7051
DISTRIBUTOR NAMES: IMPERIAL SUPPLIES LLC
DISTRIBUTORS ADDRESS: 789 PACKER DRIVE
CITY, STATE, ZIP: GREEN BAY WI 54307
IMPERIAL EMERGENCY
NUMBER: 1-800-255-3924 CHEM-TEL
IMPERIAL INFORMATION
NUMBER: 1-800-558-2808
IMPERIAL PART NO.: 6604
EFFECTIVE DATE: APRIL 21, 1995
SUPERSEDES DATE: MARCH 5, 1993
MSDS CODE: 000554
SECTION I PRODUCT IDENTIFICATION
PRODUCT NAME: PENNZOIL MULTI-PURPOSE WHITE GREASE 705
COMMON NAME: WHITE GREASE
CONTAINER/SIZE: 1 POUND CONTAINER
NFPA:
HEALTH: 1
FLAMMABILITY: 1
REACTIVITY: 0
SPECIFIC HAZARD:
SECTION II HAZARDOUS INGREDIENTS
COMPONENT NAME HAZARDOUS PERCENTAGE COMPONENT UNITS
CAS NUMBER IN BLEND MIN MAX EXPOSURE LIMITS
1. BASE LUBRICATING OIL NO 85 TO 90 OSHA PEL NO LIMIT
ACGIH TLV NO LIMIT
2. LITHIUM SOAP NO 5 TO 10 OSHA PEL NO LIMIT
MIXTURE ACGIH TLV NO LIMIT
3. WHITENER NO 1 TO 5 OSHA PEL NO LIMIT
TRADE SECRET ACGIH TLV NO LIMIT
4. ANTIWEAR AGENT NO < 1 OSHA PEL NO LIMIT
TRADE SECRET ACGIH TLV NO LIMIT
5. CORROSION INHIBITOR NO < 1 OSHA PEL NO LIMIT
MIXTURE ACGIH TLV NO LIMIT
THE INFORMATION CONTAINED HEREIN IS BASED UPON DATA AVAILABLE TO US, AND
REFLECTS OUR BEST PROFESSIONAL JUDGEMENT. HOWEVER, NO WARRANTY OF
MERCHANTABILITY, FITNESS FOR ANY USE, OR ANY OTHER WARRANTY IS EXPRESSED OR
IMPLIED REGARDING THE ACCURACY OF SUCH DATA. THE RESULTS TO BE OBTAINED FROM
THE USE THEREOF, OR THAT ANY SUCH USE DOES NOT INFRINGE ANY PATENT, SINCE THE
INFORMATION CONTAINED HEREIN MAY BE APPLIED UNDER CONDITIONS OF USE BEYOND OUR
CONTROL AND WITH WHICH WE MAY BE UNFAMLIAR, WE DO NOT ASSUME ANY RESPONSIBILITY
FOR THE RESULTS OF SUCH APPLICATION. THIS INFORMATION IS FURNISHED UPON THE
CONDITION THAT THE PERSON RECEIVING IT SHALL MAKE HIS OWN DETERMINATION OF THE
SUITABILTTY OF THE MATERIAL FOR HIS PARTICULAR PURPOSE.
SECTION III HEALTH EFFECT INFORMATION
EYE CONTACT: THIS PRODUCT IN MINIMALLY IRRITATING TO THE EYES UPON
DIRECT CONTACT. BASED ON TESTING OF SIMILAR PRODUCTS
AND/OR COMPONENTS.
SKIN CONTACT: AVOID SKIN CONTACT. THIS PRODUCT IS MINIMALLY IRRITATING
TO THE SKIN UPON DIRECT CONTACT. PROLONGED OR REPEATED
CONTACT MAY RESULT IN CONTACT DERMATITIS WHICH IS
CHARACTERIZED BY DRYNESS, CHAPING, AND REDDENING. THIS
CONDITION MAY MAKE THE SKIN MORE SUSCEPTIBLE TO OTHER
IRRITANTS, SENSITIZERS, AND DISEASE. PROLONGED OR
REPEATED CONTACT MAY RESULT IN OIL ACNE WHICH IS
CHARACTERIZED BY BLACKHEADS WITH POSSIBLE SECONDARY
INFECTION. CONSTITUENTS OF THIS PRODUCT HAVE BEEN
ASSOCIATED WITH PHOTOSENSITIVITY, AN ABNORMAL
SENSITIVITY OF SKIN TO SUNLIGHT.
INHALATION: THIS PRODUCT HAS A LOW VAPOR PRESSURE AND IS NOT
EXPECTED TO PRESENT AN INHALATION HAZARD AT AMBIENT
CONDITIONS. CAUTION SHOULD BE TAKEN TO PREVENT
AEROSOLIZATION OR MISTING OF THIS PRODUCT. THE
PERMISSABLE EXPOSURE LIMIT (PEL) AND THRESHOLD LIMIT
VALUE (TLV) FOR THIS PRODUCT AS OIL MIST IS 5 MG/M3.
EXPOSURES BELOW 5 MG/M3 APPEAR TO BE WITHOUT SIGNIFICANT
HEALTH RISK. THE SHORT-TERM EXPOSURE LIMIT FOR THIS
PRODUCT AS AN OIL MIST IS 10 MG/M3. SEE HEALTH DATA
SECTION BELOW.
INGESTION: DO NOT INGEST. THIS PRODUCT IS RELATIVELY NON-TOXIC BY
INGESTION. THIS PRODUCT HAS LAXATIVE PROPERTIES AND MAY
RESULT IN ABDOMINAL CRAMPS AND DIARRHEA. SEE HEALTH DATA
SECTION BELOW.
HEALTH DATA: GREASES CONSIST OF SOLID OR SEMISOLID DISPERSIONS OF
METALLIC SOAPS AND OTHER THICKENERS IN A MINERAL OIL
BASE. LONGTERM EXPOSURE TO SMALL DOSES OF MINERAL OIL BY
INHALATION,ASPIRATION OR INGESTION LEADING TO ASPIRATION
CAN LEAD TO LIPID PNUEMONIA OR LIPID GRANULOMA OF THE
LUNG. THESE ARE LOW-GRADE, CHRONIC, LOCALIZED TISSUE
REACTION. SHORTNESS OF BREATH AND COUGH ARE THE MOST
COMMON SYMPTOMS.
THE INTERNATIONAL AGENCY FOR RESEARCH ON CANCER (IARC)
HAS CONCLUDED THAT THE DATA ARE INADEQUATE TO EVALUATE
THE CARCINOGENICTIY OF FORMULATED PRDUCTS TO EXPERIMENTAL
ANIMALS (1984). THIS PRODUCT IS NOT CARCINOGENIC
ACCORDING TO THE OSHA HAZARD COMMUNICATION STANDARD.
SECTION IV EMERGENCY & FIRST AID PROCEDURES
EYE CONTACT: IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF WATER AND
CONTINUE FLUSHING UNTIL IRRITATION SUBSIDES. IF MATERIAL
IS HOT, TREAT FOR THERMAL BURNS AND TAKE VICTIM TO
HOSPITAL IMMEDIATELLY.
SKIN CONTACT: REMOVE CONTAMINATED CLOTHING. WASH CONTAMINATED AREA
THOROUGHLY WITH SOAP AND WATE. IF REDNESS OR IRRITATION
OCCURS, SEEK MEDICAL ATTENTION. IF MATERIAL IS HOT,
SUBMERGE INJURED AREA IN COLD WATER. IF VICTIM IS
SEVERELY BURNED, REMOVE TO A HOSPITAL IMMEDIATELY.
INHALATION: THIS MATERIAL HAS A LOW VAPOR PRESSURE AND IS NOT
EXPECTED TO PRESENT AN INHALATION EXPOSURE AT AMBIENT
CONDITIONS. IF VAPOR OR MIST IS GENERATED WHEN THE
MATERIAL IS HEATED OR HANDLED, REMOVE VICTIM FROM
EXPOSURE.
INGESTION: DO NOT INDUCE VOMITING. SEEK MEDICAL ATTENTION.
SECTION V PERSONAL HEALTH PROTECTION INFORMATION
EYE PROTECTION: EYE PROTECTION IS NOT REQUIRED UNDER CONDITIONS OF
NORMAL USE. IF MATERIAL IS HANDLED SUCH THAT IT COULD BE
SPLASHED INTO EYES, WEAR PLASTIC FACESHIELD OR
SPLASH-PROOF SAFETY GOGGLES.
SKIN PROTECTION: NO SKIN PROTECTION IS REQUIRED FOR SINGLE, SHORT
DURATION EXPOSRES. FOR PROLONGED OR REPEATED EXPOSURES,
USE IMPERVOIOUS CLOTHING (BOOTS, GLOVES, APRONS, ETC.)
OVER PARTS OF THE BODY SUBJECT TO EXPOSURE. IF HANDLING
HOT MATERIAL, USE INSULATED PROTECTIVE CLOTHING (BOOTS,
GLOVES, APRONX, ETC.). LAUNDER SOILED CLOTHES. PROPERLY
DISPOSE OF CONTAMINATED LEATHER ARTICLES INCLUDING SHOES,
WHICH CANNOT BE DECONTAMINATED.
RESPIRATORY
PROTECTION: RESPIRATORY PROTECTION IS NOT REQUIRED UNDER CONDITIONS
OF NORMAL USE. IF VAPOR OR MIST IS GENERATED WHEN THE
MATERIAL IS HEATED OR HANDLES, USE AN ORGANIC VAPOR
RESPIRATOR WITH A DUST AND MIST FILTER. ALL RESPIRATORS
MUST BE NIOSH CERTIFIED. DO NOT USE COMPRESSED OXYGEN IN
HYDROCARBON ATMOSPHERES.
VENTILATION: IF VAPOR OR MIST IS GENERATED WHEN THE MATERIAL IS
HEATED OR HANDLED, ADEQUATE VENTILATION IN ACCORDANCE
WITH GOOD ENGINEERING PRACTICE MUST BE PROVIDED TO
MAINTAIN CONCENTRATIONS BELOW THE SPECIFIED EXPOSURE OR
FLAMMABLE LIMITS.
OTHER: CONSUMPTION OF FOOD AND BEVERAGE SHOULD BE AVOIDED IN
WORK AREAS WHRE HYDROCARBONS ARE PRESENT. ALWAYS WASH
HANDS AND FACE WITH SOAP AND WATER BEFORE EATING,
DRINKING, OR SMOKING.
SECTION VI FIRE PROTECTION INFORMATION
FLASH POINT: <465 DEG F. TEST METHOD: C.O.C.
AUTOIGNITION
TEMPERATURE: >800 DEG F. TEST METHOD: NO DATA
FLAMMABLE LIMITS
IN AIR % BY VOL.
LOWER: NO DATA
UPPER: NO DATA
EXTINGUISHING MEDIA: USE DRY CHEMICAL, FOAM, OR CARBON DIOXIDE
SPECIAL FIRE FIGHTING
PROCEDURES: WATER MAY BE INEFFECTIVE BUT CAN BE USED TO COOL
CONTAINERS EXPOSED TO HEAT OR FLAME. CAUTION SHOULD BE
EXERCISED WHEN USING WATER OR FOAM AS FROTHING MAY OCCUR,
ESPECIALLY IF SPRAYED INTO CONTAINERS OF HOT, BURNING
LIQUID.
UNUSUAL FIRE AND
EXPLOSIVE CONDITIONS: DENSE SMOKE MAY BE GENERATED WHILE BURNING. CARBON
MONOXIDE, CARBON DIOXIDE, AND OTHER OXIDES MAY BE
GENERATED AS PRODUCTS OF COMBUSTION.
SECTION VII REACTIVITY DATA
STABILITY (THERMAL
LIGHT, ETC): STABLE
CONDITIONS TO AVOID: NONE
HAZARDOUS
POLYMERIZATION: WILL NOT OCCUR
CONDITIONS TO AVOID: NONE
INCOMPATIBILITY
MATERIALS TO AVOID: MAY REACT WITH STRONG OXIDIZING AGENTS
HAZARDOUS DECOMPOSITION
PRODUCTS: NONE
SECTION VIII ENVIRONMENTAL PRECAUTIONS
STEPS TO BE TAKEN IF
MATERIAL IS RELEASED
OR SPILLED: CONSULT HEALTH EFFECT INFORMATION IN SECTION III,
PERSONAL HEALTH PROTECTION INFORMATION IN SECTION V, FIRE
PROTECTION INFORMATION IN SECTION VI, AND REACTIVITY DATA
IN SECTION VII. NOTIFY APPROPRIATE AUTHORITIES OF SPILL.
CONTAIN SPILL IMMEDIATELY. DO NOT ALLOW SPILL TO ENTER
SEWERS OR WATERCOURSES. REMOVE ALL SOURCES OF IGNITION,
ABSORB WITH APPROPRIATE INERT MATERIAL SUCH AS SAND,
CLAY,ETC. LARGE SPILLS MAY BE PICKED UP USING VACUUM
PUMPS, SHOVELS, BUCKETS, OR OTHER MEANS AND PLACE IN
DRUMS OR OTHER SUITABLE CONTAINERS.
WASTE DISPOSAL
METHOD: ALL DISPOSALS MUST COMPLY WITH FEDERAL, STATE, AND LOCAL
REGULATIONS. THE MATERIAL, IF SPILLED OR DISCARDED, MAY
BE A REGULATED WASTE. REFER TO STATE AND LOCAL
REGUALTIONS.
CAUTION!! IF REGULATED SOLVENTS ARE USED TO CLEAN UP
SPILLED MATERIAL, THE RESULTING WASTE MIXTURE MAY BE
REGULATED. DEPARTMENT OF TRANSPORTATION (DOT) REGULATIONS
MAY APPLY FOR TRANSPORTING THIS MATERIAL WHEN SPILLED.
WASTE MATERIAL MAY BE LANDFILLED OR INCINERATED AT AN
APPROVED FACILITY. MATERIALS SHOUD BE RECYCLED IF
POSSIBLE.
SECTION IX MISCELLANEOUS
HANDLING AND STORAGE
REQUIREMENTS: DO NOT TRANSFER TO UNMARKED CONTAINERS. STORE IN CLOSED
CONTAINERS AWAY FROM HEAT, SPARKS, OPEN FLAME, OR
OXIDIZING MATERIALS. THIS PRODUCT IS NOT CLASSIFIED AS
HAZARDOUS UNDER DOT REGULATIONS. FIRE EXTINGUISHERS
SHOULD BE KEPT READILY AVAILABLE. SEE NFPA 30 AND OSHA
1910.106-- FLAMMABLE AND COMBUSTIBLE LIQUIDS. THIS
PRODUCT IS NOT A CONTROLLED SUBSTANCE UNDER CANADIAN
WHMIS REGULATIONS.
ADDITIONAL
INFORMATION: THIS MIXTURE MAY BE FORMULATED IN PART WITH COMPONENTS
PURCHASE FROM OTHER COMPANIES. IN MANY INSTANCES,
ESPECIALLY WHEN PROPIETARY OR TRADE SECRET MATERIALS ARE
USED, PENNZOIL COMPANY MUST RELY UPON THE HAZARD
EVALUATION OF SUCH COMPONENTS SUBMITTED TO PENNZOIL BY
THAT PRODUCT'S MANUFACTURER OR IMPORTER.
-----
THIS PRODUCT CONTAINS THE FOLLOWING SARA TITLE III,
SECTION 313 CHEMICALS:
ZINC COMPOUNDS, CAS NO.: NONE WT.: MAXIMUM 1.0%
-----
ALL INGREDIENTS OF THIS PRODUCT ARE LISTED ON THE TOXIC
SUBSTANCES CONTROL ACT (TSCA) INVENTORY.
SECTION X PHYSICAL PROPERTIES
BOILING POINT: IBP > 800 DEG F.
PERCENT VOLATILE: NO DATA
MELTING POINT: (DROPPING POINT) 380 DEG F
VAPOR DENSITY
(AIR = 1): NO DATA
APPEARANCE: OPAQUE, CREAM WHITE
EVAPORATION RATE
(EE=1): NO DATA
ODOR: MILD PETROLEUM ODOR
SPECIFIC GRAVITY: <1.0
VAPOR PRESSURE: NO DATA
MOLECULAR WEIGHT: VARIES
SOLUBILITY: INSOLUBLE IN WATER
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
Printer-Friendly View
