MSDS 6517

EAST PENN MANUFACTURING CO. INC.                        DEKA®


                     -    MATERIAL SAFETY DATA SHEET   -    
                        BATTERY TERMINAL PROTECTORS

SECTION 1

Manufacturer's Name:                               Date; May 2000
CRC Chemicals                Distributor's Name:    
(Webseal 36)                East Penn Manufacturing Co. Inc.
885 Louis Drive, Warminster, PA 18974    Deka Road, Lyon Station, PA 19536
Telephone Number for Information: (610) 682-6361
Emergency Telephone Number: CHEMTREC:  1-800-424-9300    
East Penn Product I.D.:
In Washington D.C. or outside continental U.S. call 1-202-483-7616
00355, 00237, 00356, 00319, 00368, 00367

SECTION II
HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

Hazardous Components
Specific Chemical Identity
(Common Name (s))              CAS #                OSHA PEL          ACGIH TLV     Percent
Lube Oil - 500 SUS            #64742-52-5        5mg/m3(mist)     5mg/m3        70 %

Inhibited Paraffinic Oil*    mixture            5mg/m3 (mist)       5mg/m3             30 %

*Additives are primarily fatty acid and fatty acid esters. 

SECTION 111  PHYSICAL / CHEMICAL CHARACTERISTICS 

Appearance and Odor: Amber liquid, if dye added, dark red: typical oil odor
Specific Gravity (H20)=1): 0.911
Solubility in Water; Not soluble in water, but soluble in most organic solvents.
Vapor Density (AIR=1): N/A
Boiling Point: N/A
Vapor Pressure: (mm Hg): N/A
Evaporation Rate (Butyl Acetate=1): N/A
Melting Point:  N/A
% Volatile: <1 (0.08 lbs. / gal. VOC)

SECTION IV  FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used):  >350
Flammable Limits:  N/A
Extinguishing Media: Carbon dioxide, foam, dry chemicals
Method:  COC
Unusual Fire and Explosion Hazards: Treat as oil fire

SECTION V  REACTIVITY DATA

Stability:  Stable
Incompatibility (Materials to Avoid):  Strong oxidizers
Hazardous Decomposition of By-Products; Thermal - carbon monoxide

SECTION VI  HEALTH HAZARD DATA

Route(s) of Entry:  Inhalation and skin. Avoid eye contact. 
Carcinogenicity:    OSHA: No    IRAC: No    NTP: No
Signs and Symptoms of Exposure:  Inhalation: Heavy mist concentration may cause 
breathing difficulties.
Skin and Eyes: May cause irritation.
Medical Conditions Generally Aggravated by Exposure: N/A
Chemical Listed as Carcinogen or  Potential Carcinogen: N/A
Emergency and first Aid Procedures:
Inhalation: Remove to fresh air.  Ingestion: Do not induce vomiting. Contact 
medical attention.  Eyes: Flush with large amounts of water.   Skin: Remove 
contaminated clothing and wash with soap and water. 

SECTION VII  PRECAUTIONS FOR  SAFE HANDLING AND USE

Steps to be Taken in Case Material is Released or Spilled; Area should be 
ventilated.
Absorbent should be used to pick up excess materials.
Waste Disposal Method; Dispose of any collected material in accordance with 
local, state or applicable federal regulations. 
Precautions to be Taken in Handling and Storing: Store in cool, dry area. 
Other Precautions:  N/A

SECTION VIII  CONTROL MEASURES

Respiratory Protection (Specific Type): Use NIOSH/MSHA compliant respirators or 
self contained breathing apparatus above exposure limits. 
Ventilation: Adequate to prevent accumulation of vapors.
Protective Clothing; Chemically protective glove, apron and boots if splashing 
occurs. 
Eye Protection: Safety glasses, face shield if splashing occurs.
Work Hygienic Practices: Good Personal hygiene and work practices are 
recommended.

SECTION IX  OTHER REGULATORY INFORMATION

NFPA     Hazard Rating            NFPA            HMIS
Health (Blue)                         1               1
Flammability (Red)                 1               1
Reactivity (Yellow)                 0               0

SARA Title III: Section 311/312: N/A  Section 313: None
Extremely Hazardous Substance: No
California Prop. 65: No

For additional information concerning East Penn Manufacturing Co. Inc. products 
or questions concerning the content of the MSDS please contact your East Penn 
representative.

This information is accurate to the best of East Penn Mfg. Co.'s knowledge or 
obtained from sources believed by East Penn to be accurate. Before using any 
product, read all warnings and directions on the label.  

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.