MSDS 6513

MATERIAL SAFETY DATA SHEET

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:           6513 CUTTING OIL                          
IDENTIFICATION NUMBER:  0147-36            DATE PRINTED:  01/05/09 
PRODUCT USE/CLASS:      METAL CUTTING FLUID                       

SUPPLIER/DISTRIBUTOR              MANUFACTURED BY:
IMPERIAL SUPPLIES LLC             IMPERIAL SUPPLIES LLC
789 ARMED FORCES DRIVE            789 ARMED FORCES DRIVE
GREEN BAY, WI 54304               GREEN BAY, WI 54304
INFORMATION#: 800-558-2808        INFORMATION#: 800-558-2808
EMERGENCY#:   800-255-3924        EMERGENCY#:   800-255-3924 
CHEMTEL                           CHEMTEL

EMERGENCY TELEPHONE:               EMERGENCY AGENCY/CHEMTREC      
920-494-7474                       1-800-424-9300                 
MON-FRI/8:00 AM - 5:00 PM          24 HOURS                       

PREPARER: CUSTOMER SERVICE, PHONE:  PREPARE DATE: 01/05/09

SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS

ITEM     CHEMICAL NAME                    CAS NUMBER     WT/WT%          
                                                         LESS THAN   
                                                         
01       PROPANE/ISOBUTANE/N-BUTANE       68476-86-8     25.0%     

EXPOSURE LIMITS:

      ACGIH                  OSHA                    COMPANY         
ITEM  TLV-TWA   TLV-STEL     PEL-TWA    PEL-CEILING  TLV-TWA   SKIN  
01    1000 PPM  N.E.         800 PPM    N.E.         N.E.      YES   

(See Section 16 for abbreviation legend)

SECTION 3 - HAZARDS IDENTIFICATION

*** EMERGENCY OVERVIEW *** Vapors irritating to eyes and respiratory tract.
Vapors may cause flash fire or explosion.

EFFECTS OF OVEREXPOSURE - EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can cause pain, tearing, reddening and swelling
accompanied by a stinging sensation and/or a feeling like that of fine dust in
the eyes.

EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can
result in defatting and drying of the skin which may result in skin irritation
and dermatitis (rash).

EFFECTS OF OVEREXPOSURE - INHALATION: Headaches, dizziness, nausea, decreased
blood pressure, changes in heart rate and cyanosis may result from over-
exposure to vapor or skin exposure. Prolonged inhalation may be harmful.

EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal if
swallowed.  If a corrosive product, may cause severe and permanent damage to
mouth, throat, and stomach.

EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS:  Overexposure may cause nervous
system damage.  Overexposure may cause lung damage.  Overexposure may cause
kidney damage.  May cause liver disorder (e.g., edema, proteinuria) and damage.

PRIMARY ROUTE(S) OF      SKIN CONTACT INHALATION      EYE CONTACT 
ENTRY:                                                            
                                                                  
SECTION 4 - FIRST AID MEASURES

FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water.  Get
medical attention, if irritation persists.

FIRST AID - SKIN CONTACT: Wash with soap and water.  Get medical attention if
irritation develops or persists.

FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen.  Get immediate medical
attention.

FIRST AID - INGESTION: Get medical attention immediately. If swallowed, do NOT
induce vomiting.  Give victim a glass of water or milk. Call a physician or
poison control center immediately.  Never give anything by mouth to an
unconscious person.

SECTION 5 - FIRE FIGHTING MEASURES

FLASH POINT:  -156 F             LOWER EXPLOSIVE LIMIT:  1.8%.   
                                 UPPER EXPLOSIVE LIMIT:  9.5%   

AUTO IGNITION TEMPERATURE:  ND

EXTINGUISHING MEDIA:  CO2   DRY CHEMICAL      WATER FOG

UNUSUAL FIRE AND EXPLOSION HAZARDS:   Vapors can travel to a source of ignition
and flash back.  "Empty" containers retain product residue (liquid and/or
vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE,SOLDER, DRILL,
GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR
OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Empty
drums should be completely drained, properly bunged and promptly returned to a
drum reconditioner, or properly disposed of.

SPECIAL FIREFIGHTING PROCEDURES:  Containers can build up pressure if exposed
to heat (fire). As in any fire, wear self-contained breathing apparatus
pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear.

SECTION 6 - ACCIDENTAL RELEASE MEASURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:  Absorb spill with
inert material (e.g. dry sand or earth), then place in a chemical waste
container.

SECTION 7 - HANDLING AND STORAGE

HANDLING:  Wash thoroughly after handling.

STORAGE:  Keep away from heat, sparks and flame.  Keep from freezing.

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION

ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any
air contaminants to within their TLVs during the use of this product.

RESPIRATORY PROTECTION:  A NIOSH/MSHA approved air purifying respirator with an
organic vapor cartridge or canister may be permissible under certain
circumstances where airborne concentrations are expected to exceed exposure
limits.  Protection provided by air purifying respirators is limited.  Use a
positive pressure air supplied respirator if there is any potential for an
uncontrolled release, exposure levels are not known or any other circumstances
where air purifying respirators may not provide adequate protection.
SKIN PROTECTION:  Where contact is likely, wear chemical resistant gloves, a
chemical suit, rubber boots, and chemical safety goggles plus a face shield.

EYE PROTECTION: Wear safety glasses with side shields (or goggles) and a face
shield.

OTHER PROTECTIVE EQUIPMENT:  STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD BE
FOLLOWED.

HYGIENIC PRACTICES:  Wash hands before eating. Remove contaminated clothing and
wash before reuse. Use only in a well ventilated area.  Follow all MSDS/label
precautions even after container is emptied because they may retain product
residues. Avoid prolonged or repeated contact with skin. Avoid breathing vapors
from heated material. Avoid contact with eyes, skin, and clothing.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

BOILING RANGE:   -43 - 610 F     VAPOR DENSITY:   Is heavier than
                                                  air            
ODOR:            SOLVENT         ODOR THRESHOLD:  ND             
APPEARANCE:      AMBER           EVAPORATION      Is faster than 
                                 RATE:            Butyl Acetate  
SOLUBILITY IN    NIL                                             
H20:                                                             
FREEZE POINT:    ND              SPECIFIC         0.7906         
                                 GRAVITY:                        
VAPOR PRESSURE:  ND              pH @ 0.0%:       NA             
PHYSICAL STATE   AEROSOL         VISCOSITY:       ND             

COEFFICIENT OF WATER/OIL DISTRIBUTION:

(See Section 16 for abbreviation legend)

SECTION 10 - STABILITY AND REACTIVITY

CONDITIONS TO AVOID:   ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN FLAMES.

INCOMPATIBILITY:  STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES.

HAZARDOUS DECOMPOSITION PRODUCTS:  OXIDES OF CARBON, OXIDES OF NITROGEN, AND
MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE.

HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.

STABILITY:  This product is stable under normal storage conditions.

SECTION 11 - TOXICOLOGICAL PROPERTIES

PRODUCT LD50:    NO Data         PRODUCT LC50:  658000 ppm       

COMPONENT TOXICOLOGICAL INFORMATION:

CHEMICAL NAME                   LD50             LC50               
PETROLEUM OIL, SEVERE           ND               ND                 
HYDROTREAMENT                                                       
HYDROTREATED,SEVERE,LT.NAPHTHEN NE               NE                 
IC DI                                                               
PROPANE/ISOBUTANE/N-BUTANE      N.E.             658000 MG/M3/4HRAT 

SECTION 12 - ECOLOGICAL INFORMATION

ECOLOGICAL INFORMATION:  No Information.

SECTION 13 - DISPOSAL CONSIDERATIONS

DISPOSAL METHOD:  DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL
REGULATIONS.

SECTION 14 - TRANSPORTATION INFORMATION

DOT PROPER SHIPPING NAME:  CONSUMER COMMODITY

DOT TECHNICAL NAME:  ORM-D

DOT HAZARD CLASS:                 HAZARD SUBCLASS:

DOT UN/NA NUMBER:                 PACKING GROUP:   RESP. GUIDE PAGE:

SECTION 15 - REGULATORY INFORMATION

U.S. FEDERAL REGULATIONS:   AS FOLLOWS -

OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)

CERCLA -SARA HAZARD CATEGORY: This product has been reviewed according to the
EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the Superfund
Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered,
under applicable definitions, to meet the following categories:

IMMEDIATE HEALTH HAZARD   FIRE HAZARD    PRESSURIZED GAS HAZARD

SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of
1986 and 40 CFR Part 372:

CHEMICAL NAME      CAS NUMBER        WT/WT% IS        
                                     LESS THAN        
No SARA Section 313 components exist in this product. 

TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements Of TSCA 12(B) if exported from the United States:

CHEMICAL NAME                       CAS NUMBER          
No information is available.                            

U.S. STATE REGULATIONS: AS FOLLOWS -

NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:

CHEMICAL NAME                    CAS NUMBER                      
PETROLEUM OIL, SEVERE            64742-65-0                      
HYDROTREATMENT                                                   
HYDROTREATED,SEVERE,LT.NAPHTHENI 64742-52-5                      
C DIST.                                                          

PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at greater
than 3%:

CHEMICAL NAME                    CAS NUMBER                      
PETROLEUM OIL, SEVERE            64742-65-0                      
HYDROTREATMENT                                                   
HYDROTREATED,SEVERE,LT.NAPHTHENI 64742-52-5                      
C DIST.                                                          

CALIFORNIA PROPOSITION 65:
WARNING: The chemicals (s) noted below and contained in this product, are known

To the state of California to cause cancer, birth defects or other reproductive
harm:

CHEMICAL NAME                    CAS NUMBER                      
No Proposition 65 chemicals exist in this product.                


INTERNATIONAL REGULATIONS: AS FOLLOWS -

CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.

CANADIAN WHMIS CLASS: No information available

SECTION 16 - OTHER INFORMATION

HMIS RATINGS -        FLAMMABILITY: 4       REACTIVITY: 0        
HEALTH: 2                                                        

PREVIOUS MSDS REVISION DATE: 01/05/09

REASON FOR REVISION:  UPDATE

LEGEND:  N.A. - Not Applicable, N.E. - Not Established,   N.D.  - Not
Determined

    *** THIS MSDS IS NOT FOR REPRODUCTION OR REPRODUCTION OR DISTRIBUTION ***
The information contained on this MSDS has been checked and should be accurate.
 However, it is the responsibility of the user to comply with all Federal,
State, and Local laws and regulations.

                                  <END OF MSDS>

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2010 Imperial Supplies LLC Questions or comments? Contact us.