MSDS Sheet 6502

• All Products
• Fasteners
   » Grade 8
   » Grade 5
   » Threaded Fasteners
• Hardware
• Rivet & Rivet Guns
• Vehicle Lighting
• Electrical Products
• Tubing & Tube Fittings
• Air Brake Products
• Hose & Hose Ends
• Cutting Tools
• Abrasives
• Safety Products &
  Welding Supplies
• Chemicals & Paint
   » MSDS Information
   » CA/OTC Information
• Shop Supplies
• Vehicle Parts &
  Accessories
• Assortments &
  Steel Equipment
   » Assortment Listing

• Online Catalog Index
• Discontinued &
Overstock Specials

Printer-Friendly View

MATERIAL SAFETY DATA SHEET SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION -------------------------------------------------------------------------------- PRODUCT NAME: PEN LUBE W/PTFE IDENTIFICATION NUMBER: 6502 & 6502-1 & 6502-8 & 6502-9 PRODUCT USE/CLASS; PENETRANT DATE PRINTED; 06/23/04 SUPPLIER/DISTRIBUTOR: MANUFACTURED FOR; IMPERIAL SUPPLIES LLC IMPERIAL SUPPLIES LLC 789 ARMED FORCES DRIVE 789 ARMED FORCES DRIVE GREEN BAY, WI. 54304 GREEN BAY, WI. 54304 INFORMATION #: 800-558-2808 INFORMATION #: 800-558-2808 EMERGENCY #: 800-255-3924 EMERGENCY #: 800-255-3924 CHEM-TEL CHEM-TEL SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS WT / WT % -------------------------------------------------------------------------------- ITEM ------CHEMICAL NAME --------------------- CAS NUMBER LESS THAN 01 ISOPAR M FLUID 64742-47-8 50.0 % 02 HEAVY NAPHTHENIC DISTILLATE 64742-52-5 30.0 % 03 PROPANE/ISOBUTANE/N-BUTANE 68476-86-8 25.0 % EXPOSURE LIMITS ACGIH OSHA COMPANY ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN 01 N.E. N.E. N.E. N.E. 152 PPM NO 02 5 MG/M3 N.E. 5 MG/M3 N.E. N.E. NO 03 800 PPM N.E. 800 PPM N.E. N.E. YES (See Section 16 for abbreviation legend) SECTION 3 - HAZARDS IDENTIFICATION -------------------------------------------------------------------------------- *** EMERGENCY OVERVIEW ***; Vapors irritating to eyes and respiratory tract. Vapors may cause flash fire or explosion. EFFECTS OF OVEREXPOSURE - EYE CONTACT; Liquid, aerosols and vapors of this product are irritating and can cause pain, tearing, reddening and swelling accompanied by a stinging sensation and/or a feeling like that of fine dust in the eyes. EFFECTS OF OVEREXPOSURE - SKIN CONTACT; Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). EFFECTS OF OVEREXPOSURE - INHALATION; Headaches, dizziness, nausea, decreased blood pressure, changes in heart rate and cyanosis may result from over-exposure to vapor or skin exposure. Prolonged inhalation may be harmful. EFFECTS OF OVEREXPOSURE - INGESTION; This material may be harmful or fatal if swallowed. Corrosive and may cause severe and permanent damage to mouth, throat, and stomach. EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS; Overexposure may cause nervous system damage. Overexposure may cause lung damage. Overexposure may cause kidney damage. PRIMARY ROUTE (S) OF ENTRY; SKIN CONTACT INHALATION INGESTION EYE CONTACT SECTION 4 - FIRST AID MEASURES -------------------------------------------------------------------------------- FIRST AID - EYE CONTACT; Immediately flush eyes with plenty of water. Get medical attention, if irritation persists. FIRST AID - SKIN CONTACT; Immediately flush skin with plenty of water. Remove clothing. Get medical attention immediately. Wash clothing separately before reuse. FIRST AID - INHALATION; Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. FIRST AID - INGESTION; Get medical attention immediately. If swallowed, do NOT induce vomiting. Give victim a glass of water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. SECTION 5 - FIRE FIGHTING MEASURES -------------------------------------------------------------------------------- FLASH POINT; -156 F LOWER EXPLOSIVE LIMIT: 0.5 % (PENSKY-MARTENS C.C.) UPPER EXPLOSIVE LIMIT: 9.5 % AUTO IGNITION TEMPERATURE; ND EXTINGUISHING MEDIA; CO2 DRY CHEMICAL FOAM WATER FOG UNUSUAL FIRE AND EXPLOSION HAZARD: Vapors can travel to a source of ignition and flash back. "Empty" containers retain product residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Empty drums should be completely drained, properly bunged and promptly returned to a drum reconditioner, or properly disposed of. SPECIAL FIREFIGHTING PROCEDURES; Containers can build up pressure if exposed to heat (fire). As in any fire, wear self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. SECTION 6 - ACCIDENTAL RELEASE MEASURES -------------------------------------------------------------------------------- STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED; Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. SECTION 7 - HANDLING AND STORAGE -------------------------------------------------------------------------------- HANDLING; Wash thoroughly after handling. STORAGE: Keep away from heat, sparks and flame. Keep from freezing. SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION -------------------------------------------------------------------------------- ENGINEERING CONTROLS; Local exhaust ventilation may be necessary to control any air contaminants to within their TLVs during the use of this product. RESPIRATORY PROTECTION; A NIOSH/MSHA approved air purifying respiratory with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection. SKIN PROTECTION; Where contact is likely, wear chemical resistant gloves, a chemical suit, rubber boots, and chemical safety goggles plus a face shield. EYE PROTECTION; Wear safety glasses with side shields (or goggles) and a face shield. OTHER PROTECTIVE EQUIPMENT; STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD BE FOLLOWED. HYGIENIC PRACTICES; Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Follow all MSDS/label precautions even after container is emptied because they may retain product residues. Avoid prolonged or repeated contact with skin. Avoid breathing vapors from heated material. Avoid contact with eyes, skin, and clothing. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES -------------------------------------------------------------------------------- BOILING RANGE; -43 - 495 F VAPOR DENSITY; Is heavier than air ODOR: OIL ODOR THRESHOLD; ND APPEARANCE; HAZY AMBER EVAPORATION RATE; Is faster than SOLUBILITY IN H20; NEGLIGIBLE Butyl Acetate FREEZE POINT; 32 SPECIFIC GRAVITY; 0.7340 VAPOR PRESSURE; 80-90 pH @ 0.0 %: NA PHYSICAL STATE; LIQUID VISCOSITY; NA COEFFICIENT OF WATER/OIL DISTRIBUTION; PARTIAL (See Section 16 for abbreviation legend) SECTION 10 - STABILITY AND REACTIVITY -------------------------------------------------------------------------------- CONDITIONS TO AVOID; ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN FLAMES. INCOMPATIBILITY; STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES. HAZARDOUS DECOMPOSITION PRODUCTS; OXIDES OF CARBON, OXIDES OF NITROGEN, AND MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE. HAZARDOUS POLYMERIZATION; Will not occur under normal conditions. STABILITY; This product is stable under normal storage conditions. SECTION 11 - TOXICOLOGICAL PROPERTIES -------------------------------------------------------------------------------- PRODUCT LD50; 5 mg/kg PRODUCT LC50; 57 ppm COMPONENT TOXICOLOGICAL INFORMATION; CHEMICAL NAME LD50 LC50 ISOPAR M FLUID ND ND HEAVY NAPHTHENIC DISTILLATE >5 MG/KG/RAT NE PROPANE/ISOBUTANE/N-BUTANE NE 57 PPH/15M/RAT ALOX >5000 MG/KG/RAT NE PARAFFINE 120 MG/KG/RAT NE NO CHEMICAL NAME FOUND No Information No Information NONIONIC SURFACTANT 1310 MG/KG/RAT ND ETHYLENE OXIDE 72 MG/KG/RAT 800 PPM/RAT SECTION 12 - ECOLOGICAL INFORMATION -------------------------------------------------------------------------------- ECOLOGICAL INFORMATION; No Information. SECTION 13 - DISPOSAL CONSIDERATIONS -------------------------------------------------------------------------------- DISPOSAL METHOD; DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL REGULATIONS. SECTION 14 - TRANSPORTATION INFORMATION -------------------------------------------------------------------------------- DOT PROPER SHIPPING NAME; AEROSOL - CONSUMER COMMODITY DOT TECHNICAL NAME; ORM-D DOT HAZARD CLASS; 2.1 HAZARD SUBCLASS; NA DOT UN/NA NUMBER; UN1950 PACKING GROUP; NA RESP. GUIDE PAGE; 126 SECTION 15 - REGULATORY INFORMATION -------------------------------------------------------------------------------- U.S. FEDERAL REGULATIONS; AS FOLLOWS - OSHA; Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200) CERCLA - SARA HAZARD CATEGORY; This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories; IMMEDIATE HEALTH HAZARD CHRONIC HEALTH HAZARD FIRE HAZARD PRESSURIZED GAS HAZARD SARA SECTION 313; This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: CHEMICAL NAME CAS NUMBER WT/WT % IS LESS THAN No SARA Section 313 components exist in this product. TOXIC SUBSTANCES CONTROL ACT; This product contains the following chemical substances subject to the reporting requirements of TSCA 12 (B) if exported from the United States; CHEMICAL NAME CAS NUMBER No information is available. U.S. STATE REGULATIONS; AS FOLLOWS - NEW JERSEY RIGHT-TO-KNOW; The following materials are non-hazardous, but are among the top five components in this product; CHEMICAL NAME CAS NUMBER ALOX MIXTURE PENNSYLVANIA RIGHT-TO-KNOW; The following non-hazardous ingredients are present in the product at greater than 3 %. CHEMICAL NAME CAS NUMBER ALOX MIXTURE CHEMICAL NAME CAS NUMBER CALIFORNIA PROPOSITION 65; WARNING; The chemical(s) noted below and contained in this product, are known to the state of California to cause cancer, birth defects or other reproductive harm; CHEMICAL NAME CAS NUMBER ETHYLENE OXIDE 75-21-8 INTERNATIONAL REGULATIONS; AS FOLLOWS - CANADIAN WHMIS; This MSDS has been prepared in compliance with Controlled Product Regulations except for use of the 16 headings. CANADIAN WHMIS CLASS; No information available. SECTION 16 - OTHER INFORMATION -------------------------------------------------------------------------------- HMIS RATINGS - HEALTH; 1 FLAMMABILITY; 4 REACTIVITY; 0 PREVIOUS MSDS REVISION DATE; 06/23/04 VOLATILE ORGANIC COMPOUNDS (VOCS): 1.22 lbs/gal 146 grams/ltr LEGEND; N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations. <END OF MSDS>