LOGIN
Login E-mail:
Password:

Apply for an account! »
Product Search
Bottom
 

MSDS 5593

5593: Super Lube Pump Bottle 32 Oz. [12]
5593-1: (DISCONTINUED)
MSDS Last updated: 03/01/2010

IMPERIAL SUPPLIES LLC MSDS SHEET FOR 5593, 5594, and 5594-1
                                   Super Lube

Material Safety Data Sheet may be used to comply U.S. Department of Labor    
with OSHA's Hazard Communication Standard 29 CFR Occupational Safety and     
1910.1200. Standard must be consulted for        Health Administration. ( Non
specific requirements.                           Mandatory Form)             
                                                 Form Approved               
                                                 OMB No. 1218-0072           
IDENTITY( as used on Label and List)             Note: Blank spaces are not  
SUPER LUBE OIL WITH PTFE                         permitted. If any item is   
Part Numbers: 51010, 51014, 51004, 51030,        not applicable, or no       
51040,51050, 51550, 51013, 11520                 information is available,   
                                                 the space must be marked to 
                                                 indicate that.              
                                                                              
Section I-                                                                    
Manufacture's Name                               SYNCO CHEMICAL CORPORATION  
Address:                                         24 DaVINCI DRIVE            
                                                 BOHEMIA, NY 11716           
Emergency Telephone Number:                      800-424-9300                
Telephone Number for Information:                631-567-5300                
Date Prepared:                                   August 11, 2009             
Signature of preparer: ( Optional)               N/A                         
                                                                              
Section II- HAZADROUS INGREDIENTS/IDENTITIY INFORMATION                       
Hazardous Components (specific           OSHA PEL         Recommended         
Chemical/identity; common name(s))       ACGIH TLV        Percentages         
Synthetic Hydrocarbon                    CAS# 68037-01-4  75-85%              
Hydro Treated Polymer                    CAS# 8042-47-5   15-25%              
Anti-Oxidant                             CAS# 41484-35-9  1-2%                
Fumed Silica                             CAS# 68611-44-9  1-5%                
Polytetrafluorethylene                   CAS# 9002-84-0   2-4%                
Polyglycol                               CAS# 025322-6-4  .5-1%               
Proprietary Additives                                     .25-1%              
All Ingredients are TSCA Listed.                                              
                                                                              
Section III- PHYSICAL/CHEMICAL CHARACTERISTICS                                
Boiling Point                                    N/A                         
Vapor Pressure (mm Hg.)                          N/E                         
Vapor Density (AIR=1)                            N/E                         
Solubility in Water                              Not Soluble in water        
Appearance and Odor                              Translucent white to        
                                                 slightly yellow, slight Odor
Specific Gravity (H2O=1)                         0.87 + 0.02 @ 15C           
Melting Point                                    N/A                         
Evaporation Rate (Butyl Acetate =1)              N/E                         
                                                                              
Section IV-  FIRE AND EXPLOSION HAZARD DATA                                   
Flash Point ( Method Used )                      >428 F (220 C) COC          
Extinguishing Media                              Carbon Dioxide, Dry         
                                                 Chemical, Foam              
Special Fire Procedures                          Self-contained respiratory  
                                                 protection should be        
                                                 provided for fighting fires 
                                                 in confined areas.          
Unusual Fire and Explosion Hazards:              None Known                  
Flammable Limits:                                N/A                         
LEL:                                             N/E                         
UEL:                                             N/E                         
                                                                              
Section V- REACTIVITY DATA                                                    
Stability:                                       Stable                      
Conditions to Avoid:                             None Known                  
Incompatibility (Materials to Avoid):            N/E                         
Hazardous Decomposition or Byproducts:           Burning may produce Carbon  
                                                 Monoxide                    
Hazardous Polymerization:                Will Occur       Conditions to avoid:
                                                          None                
                                                                              
Section VI- HEALTH HAZARD DATA                                                
Routes of     Inhalation Skin- Yes                            Ingestion- Yes 
Entry:        - ?                                                            
Health Hazards  No Evidence of adverse effect from available information on   
( Acute and     swallowing. SKIN ABSORBITION and INHALATION: May cause slight 
Chronic)        irritation with skin and eyes.                                
                                                                              
                Carcinogenicity   NTP_            IARC MONOGRAPHS   OSHA      
                Regulations                                                   
                Not Listed         Not Listed                       Not Listed
                                                                              
                                                                              
                                                                              
Signs and Symptoms of Exposure:        Contact with eye may result in slight 
                                       irritation. Prolonged or repeated skin
                                       contact may cause mild irritation.    
Medical Conditions Generally           N/E                                   
Aggravated by Exposure:                                                      
Emergency and First Aid Procedures:    SKIN: Remove by wiping and wash with  
                                       soap and water. EYES: Wash with       
                                       copious amounts of water.             
                                                                              
Section VII-  PRECAUTIONS FOR SAFE HANDLING AND USE                           
Steps to be taken in case material is  Spills should be absorbed or scarped  
released or spilled:                   up.                                   
Waste disposal method:                 Use method outlined in local EPA      
                                       Government Regulations. Contact your  
                                       local EPA office.                     
Precautions to be taken in handling    Good manufacturing practices should be
and storage:                           followed in handling and storage.     
Other Precautions:                     Surface subject to spills with this   
                                       product can become slippery.          
                                                                              
Section VIII- CONTROL MEASURES                                                
Respiratory Protection (Specify Type): None Required                         
Ventilation:                           Local Exhaust : N/A                   
                                       Mechanical(general): N/A              
                                       Special: N/A                          
                                       Other: N/A                            
Protective Gloves:                     None under normal use                 
Eye Protection:                        Safety Goggles                        
Other Protective Clothing or           None under normal use                 
equipment:                                                                   
Work Hygienic Practices:               Normal precautions common to good     
                                       manufacturing practices should be     
                                       followed.                             
                                                                              
HMIS Codes:                                                                   
Fire- 1             Health- 0           Reactance- 0        Other- 0           
                                                                              
                                                                              

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

For more product information by email, click here

Imperial Supplies LLC does not provide services and products outside the United States

credit card logos