Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 5506 -- [Back] | |||
|
MSDS 5506 5506: Anti-Freeze Gas Line [24]MSDS Last updated: 02/11/2010
IMPERIAL SUPPLIES LLC MSDS SHEET FOR 5506
28201 - HEET Gas Line Antifreeze
SECTION 1 - CHEMICAL PRODUCT AND MANUFACTURER IDENTIFICATION
Product Name: 28201 - HEET Gas Line Antifreeze
Part Number: 28201
Product CAS: (None)
Product Code: 28201
Synonyms: 28201 - HEET Gas Line Antifreeze
MANUFACTURER IDENTIFICATION
Name: Gold Eagle Company
Address: 4400 S. Kildare Blvd
City: Chicago State: IL Zip: 60632-4372
For information call: 773-376-4400
Emergency Number: N/A
Emergency Agency: INFOTRAC
Agency Number: 1-800-535-5053
MSDS Effective Date: 1/1/1980
MSDS Supersedes Date: 4/8/2008
Miscellaneous:
Product CAS: Mixture
Brief Description: Gas line dryer and antifreeze for automobiles.
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Chemical Name CAS MIN MAX
Methanol 67-56-1 99 99
Proprietary Additive (none) 1 1
Miscellaneous:
CHEMICAL NAME LIMIT VALUES
Methanol PEL 200 ppm
Proprietary Additive (CAS#: Mixture) N/A
SECTION 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW:
NFPA: Health: 1 Fire: 3 Reactivity: Specific Hazard: None
0
HMIS: Health: 1 Flammability: 3 Reactivity: PPE: B
0
Miscellaneous:
This product does not contain any components above de minimus concentrations
that are considered carcinogenic by OSHA, IARC or NTP.
POTENTIAL HEALTH EFFECTS
Target Organs/Primary Route(s) of Entry:
Eye: Mild Irritant
Skin: Prolonged or repeated skin contact may cause dermatitis, scaling
and possible systemic effects.
Ingestion: POISON-Oral human lowest lethal dose = 6.4 g/kg
Inhalation Poisonous, narcotic chemical affecting central nervous system
: resulting in: dizziness, nausea, visual impairment, narcosis and
muscular impairment.
Miscellaneous:
SECTION 4 - FIRST AID MEASURES
Eye: If the product contacts the eyes, immediately wash the eyes with
large quantities of room temperature water for at least 15 minutes,
occasionally lifting the lower and upper lids. Get medical
attention immediately. A follow up visit to an ophthalmologist
should be made. Contact lenses should not be worn when working with
this chemical.
Skin: If the product contacts the skin, promptly wash the contaminated
skin with soap and water for at least 15 minutes. If this product
penetrates the clothing, promptly remove the clothing and was the
skin with soap and water. Systemic effects may be delayed 18-72
hours, therefore keep individual under observation.
Ingestion: If this product is ingested and the person is conscious, induce
vomiting, then give 2 teaspoons of baking soda in a glass of water.
DO NOT INDUCE AN UNCONSCIOUS PERSON TO VOMIT. Get medical
attention immediately.
Inhalation Move the exposed person to fresh air at once and call emergency
: medical care. If breathing has stopped, give artificial
respiration. IF breathing is difficult, give humidified oxygen.
Notes to Physician: No data available.
SECTION 5 - FIRE FIGHTING MEASURES
Flash Point: 52 F. (11 C.) TOC
Auto-Ignition Temperature: N/A
Flammable Limits
Lower Limit: Explosive Limit 6.0
(LEL):
Upper Limit: Explosive Limit 36.5
(UEL):
Extinguishin Use halon replacement or carbon dioxide extinguishers or alcohol
g Media: foam for small fires. Water spray or fog can cool fire but may
not be effective in extinguishing fires. Large fires should be
extinguished with alcohol foam. Use water spray to cool
containers exposed to fire. Containers may explode in heat or
fire.
Unusual Fire Dangerous fire and explosion hazard when exposed to heat or
and Explosion flames. Methanol is extremely flammable and forms explosive
Hazards: mixtures with air. Methanol vapors may travel considerable
distance to a source of ignition and flash back.
Special Fire Wear NIOSH approved SCBA respirator in the positive pressure
Fighting mode and chemical protective clothing.
Procedures:
General Information: Flammable Limits: 6.0 to 3635
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Small Spill: Remove sources of heat or ignition, provide adequate
ventilation, contain leak using absorbent, inert,
non-combustible material.
Large Spill: Contain spill, transfer to secure containers. In the event of an
uncontrolled material release, the user should determine if
release is reportable under applicable laws and regulations.
SECTION 7 - HANDLING AND STORAGE
Handling: See other sections of MSDS.
Storage: See other sections of MSDS.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
GENERAL HYGIENE Use normal hygiene practices.
CONSIDERATIONS:
OTHER Methanol waste and material contaminated with methanol would be
PRECAUTIONS: regulated as a hazardous waste material under the hazardous
waste number U154.
ENGINEERING CONTROLS:
Local Exhaust: Provide local ventilation to maintain exposure levels
below recommended exposure limits.
Mechanical (General): In confined spaces, mechanical ventilation may be
required.
Special Ventilation: N/A
Other Ventilation: N/A
PERSONAL RPOTECTIVE EQUIPMENT
Eyes/Face: Use splash proof chemical, safety goggles or appropriate
full-face respirator. Contact lenses should not be worn when
working with this chemical.
Skin: Use natural rubber or neoprene gloves as required.
Respirators: Do not use air purifying respirator. Use NIOSH approved
respirator approved supplied or self contained respirator.
Respirators must be selected based on the airborne levels
found in the workplace and must not exceed the working limits
of the respirator.
Other Protective If there is a possibility of exposure of an individual's body
Clothing/Equipme to methanol, wear body covering work clothes to avoid
nt: prolonged or repeated exposure.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance/Odor: Yellow liquid, solvent odor
pH: N/A
Vapor Pressure: (MM GH): 97.0
Vapor Density (Air=1): 1.1
Evaporation Rate: N/A
Viscosity: N/A
Boiling Point: 148 F. (65 C.) N/A
Freezing/Melting Point: N/A
Decomposition Temperature: N/A
Solubility in Water: Soluble
Specific Gravity: 0.795
Molecular Formula: N/A
Molecular Weight: N/A
VOC Coating (minus water): 0 Lbs/Gallon
Coating Density: 0 Lbs/Gallon
Solvent Density: 0 Lbs/Gallon
Percent Solvent (volume): 0
Percent Solids (volume): 0
Percent Water (volume): 0
Percent Volatile by Weight: 0
Miscellaneous:
% Volatile/Volume 100.0
Specific Gravity (H2O=1): N/A
Percent Solvent (volume): 0
Percent Solids (volume): 0
Percent Water (volume): 0
Product is flammable, keep away from sources of ignition, combustibles,
oxidizing material and acid. Store in an area equipped with automatic
sprinklers or fire extinguishing system. Empty containers contain product
residues; assume empty containers to have the same hazards as full containers.
SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable: Yes
Conditions to Avoid:
Store in a well ventilated place away from sources of ignition, combustibles,
oxidizing materials and acid.
Incompatibilities with Other Materials:
Strong oxidizing agents, aluminum, zinc, or metals that displace hydrogen,
rubber and rubber based coatings, chromic anhydride, lead perchlorate and
perchloric acids.
Hazardous Decomposition Products:
Excessive heating and/or incomplete combustion will produce carbon monoxide.
Hazardous Polymerization:
Hazardous Polymerization May occur: No
SECTION 11 - TOXICOLOGICAL INFORMATION
No data available
SECTION 12 - ECOLOGICAL INFORMATION
No data available
SECTION 13 - DISPOSAL CONSIDERATIONS
Dispose of product in accordance with local, state and federal regulations.
Before attempting clean up, refer to other sections of MSDS for hazard warning
information.
SECTION 14 - TRANSPORT INFORMATION
Transportation Information:
Shipping Information (CFR 49 and IMDG):
Proper Shipping Name: Gasoline Additive, N.O.I.
DOT Hazard Class: Consumer Commodity, ORM-D
DOT UN Number: None required
IMDG Shipping Name: Dangerous Goods in Limited Quantities of Class 3.2
(Methanol)
PGII
Label Information:
No data available.
SECTION 15 - REGULATORY INFORMATION
SARA Title III:
Section 302: None
Section 304: None
Section 311: Hazard categories - Fire Hazard-Yes; Acute=Yes and Chronic=Yes
Section 313: Methanol, CAS# 67-56-1, 99.0%
CERCLA:
Section 311 (b) (4): Requires discharges of crude oil and petroleum products
in any kind or form to waters must immediately be reported to the National
Response Center at (800) 424-8802.
SECTION 16 - ADDITIONAL INFORMATION
Disclaimer: Information presented herein is believed to be factual, as it has
been derived from the works and opinions of persons believed to be qualified
experts. However, nothing contained in this information is to be taken as
warranty or representation for which the Gold Eagle Co. bears legal
responsibility. The user should review any recommendations in the specific
context of the intended use to determine whether they are appropriate.
Prepared by: Mike Profetto
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
