MSDS 4638-4

MSDS Material Safety Data Sheet         BLASTER
      The Blaster Chemical Companies, Inc

                             Air Tool Lubricant

MSDS Number:  ATL                                 Revision Date: 2/21/06

1. PRODUCT AND COMPANY IDENTIFICATION
Product Name:    Air Tool Lubricant
Revision Date:   2/21/06
MSDS Number:     ATL
Product Code:    16-ATL, 128-ATL, & 5-ATL, & 55-ATL

Manufacturer:    The Blaster Chemical Companies, Inc.
                 8500 Sweet Valley Drive
                 Valley View, OH 44125

                 (216) 901-5800
                 (216) 901-5801 fax
                 www.blasterproducts.com

2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients:

CAS #       Chemical Name                    Perc.
64742650    Distillates, petroleum, solvent-dewaxed      >90

3. HAZARDS IDENTIFICATION
Route of Entry:  Eyes, skin, inhalation, ingestion
Target Organs:
Inhalation:      Inhalation of spray mist may cause irritation to the
                 respiratory tract.
Skin Contact:    Repeated or prolonged contact with skin may cause
                 mild irritation and possibly dermatitis.
Eye Contact:     Likely to cause immediate or delayed irritation.
                 Irritation will show as redness and/or swelling of
                 the eyes.
Ingestion:       Low toxicity. Will have a laxative effect if
                 swallowed.

4. FIRST AID MEASURES
Inhalation:      Remove to fresh air. If not breathing, give artificial
                 respiration. If breathing is difficult, give oxygen.
                 Continue  to monitor. Get medial attention.
Skin Contact:    Remove contaminated clothing immediately!
                 Wash skin with soap and water. If irritation
                 develops, seek medical attention.
Eye Contact:     Flush eye(s) with water for 15 minutes. Get medical
                 attention. If eye irritation persist, obtain medical
                 treatment.
Ingestion:       Do not induce vomiting. Get medical attention or
                 advice.

5. FIRE FIGHTING MEASURES
Flashpoint: >395 F  (COC)

Auto ignition temperature: >600 F

Extinguishing Media: Dry chemical. Carbon dioxide, water fog or foam.

6. ACCIDENTAL RELEASE MEASURES
Small Spill:  Absorb the liquid and scrub the area with detergent and
              water.

Large Spill: Avoid vapors, sources of ignition, sewers and waterways.
             Absorb with suitable absorbent.

Disposal:   Dispose of liquid and absorbents in accordance with local,
            state, and federal laws.

7. HANDLING AND STORAGE
Handling Precautions:  Use in accordance with good industrial workplace
                 practices. Avoid unnecessary contact. Wash
                 thoroughly after handling. Use with good
                 ventilation.
Storage Requirements: Keep containers tightly closed and in a cool well-
                 ventilated place. Always store this material in
                 closed labeled containers. Store away from strong
                 oxidizers.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls:  Eye wash stations and emergency showers would
                 be immediately available.
Protective Equipment:  Eyes and Face: Standard safety glasses with splash
                 shields typically offer adequate protection.
                 Where excessive splashing or spraying is possible,
                 a face shield should be used.

                 Skin and clothing: Excessive contact should be
                 avoided. Neoprene gloves, boots and aprons will
                 provide adequate protection when contact cannot
                 be avoided. Remove and wash any contaminated
                 clothing immediately. Wash thoroughly after
                 handling.

                 Respiratory: Good general ventilation should be
                 sufficient to control airborne levels. Maintain
                 airborne concentrations below OSHA established
                 exposure limits of ingredients in Section 2.

Exposure Guidelines/Other:  The Blaster Chemical Companies takes no
                 responsibility for determining what measures are
                 required for personal protection in any specific
                 application. This information should be used
                 with discretion.

9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:          Oily
Physical State:      Liquid
Odor:                Typical petroleum
pH:                  Not Determined
Vapor Pressure:      Not applicable
Vapor Density:       >1 (air = 1)
Boiling Point:       700-860 F
Freezing/Melting Pt: Not Determined
Solubility:          nil
Spec Grav./Density:  0.86 (water = 1)

Heat Value:            Not Determined
VOC:                   Not Determined
Evap. Rate:            <1 (butyl acetate = 1)
Bulk Density:          Not Determined
Octanol:               Not applicable
Molecular Weight:      Not Determined
Particle Size:         Not applicable
Softening Point:       Not applicable
Viscosity:             100 SUS
Percent Volatile:      nil
Sat. Vap. Concentrat.: Not Determined
Molecular Formula:     Not Determined

10. STABILITY AND REACTIVITY
Stability:       This product is stable.

Conditions to avoid:   Avoid excessive heat, sources of ignition and
                 excessive water.

Materials to avoid (incompatibility):  Avoid contact with strong oxidizing
                 Agents and strong reducing agents (strong acids
                 or bases. Avoid mixture with water.

Hazardous Decomposition products:  Carbon monoxide, carbon dioxide,
                 and various hydrocarbons.

Hazardous Polymerization:  Will not occur.

11. TOXICOLOGICAL INFORMATION
Toxicological information on this product as a mixture has been determined. See
section 15 for reportable ingredients.

12. ECOLOGICAL INFORMATION
Ecological information on this product as a mixture has not been
determined.

13. DISPOSAL CONSIDERATIONS
Used or unused product should be disposed of in accordance with local, state,
and federal regulations. Some special regulations may exists for the disposal
of empty aerosol containers.

Empty containers may contain residual pressure and contents. They should be
handled with the same precautions as the product.

14. TRANSPORT INFORMATION
Not regulated as a hazardous material.

15. REGULATORY INFORMATION

REGULATORY KEY DESCRIPTIONS
MASS = MA Massachusetts Hazardous Substances List
OSHAWAC = OSHA Workplace Air Contaminants
PA = PA Right-To-Know List of Hazardous Substances
TXAIR = TX Air Contaminants with Health Effects Screening Level

16. OTHER INFORMATION
Manufacturer's Disclaimer:
To the best of our knowledge, the information contained herein is accurate.
However, neither The Blaster Chemical Companies nor any of its subsidiaries
assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability on any
material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although  certain hazards are
described herein, we cannot  guarantee that these are the only hazards which
exists.


END OF MSDS DOCUMENT

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.