Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 4630-4 -- [Back] | |||
|
MSDS 4630-4 4630-4: Silicone Lube 1 Gallon [6]4730: Silicone Lube 16 Oz Trigger [12] MSDS Last updated: 04/11/2005
MATERIAL SAFETY DATA SHEET
SILICONE LUBRICANT SPRAY - Liquid
Flammability 2
Instability 0
Health 2
Special -
Printed: 02/21/2005
Revision: 02/21/2005
Supercedes Revision: 01/28/2004
Date Created: 01/28/2004
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code: 4630-4 & 4730
Product Name: SILICONE LUBRICANT SPRAY - Liquid
Reference #: LAB 204
Manufacturer Information
Company Name: Imperial Supplies LLC
789 Packer Drive
P.O. Box 11008
Green Bay, WI 54307-1008
Emergency Contact: Chem Tel (800) 255-3924
Information: (800) 558-2808
CAS Number: MIXTURE
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components CAS # Percentage OSHA ACGIH Other Limits
(Chemical Name) PEL TLV
--------------------------------------------------------------------------------
1. Hexane, Light 64742-89-8 35.0-40.0% 400 ppm 400 ppm No Data
aliphatic naptha
2. Hydrotreated light 64742-47-8 50.0-60.0% No Data No Data No Data
distillate (petroleum)
3. Polydimethylsiloxane 63148-62-9 50.0-15.0% No Data No Data No Data
Hazardous Components RTECS # OSHA OSHA ACGIH ACGIH
(Chemical Name) STEL CEIL STEL CEIL
--------------------------------------------------------------------------------
1. Hexane, Light aliphatic NA No data. No data No data No data
naptha
2. Hydrotreated light OA5504000 No data No data No data No data
distillate (petroleum)
3. Polydimethylsiloxane VW1511000 No data No data No data No data
3. HAZARDS IDENTIFICATION
Emergency Overview
Flammable liquid and vapor. May be harmful is swallowed. Vapor
harmful. Prolonged or repeated contact with the skin can cause drying and
defatting. Inhalation of high concentrations of vapor may cause heart
irregularities, unconsciousness or death.
Routes(s) of Entry: Inhalation? Yes Skin? Yes Eyes? Yes
Ingestion? Yes
Potential Health Effects (Acute and Chronic)
ACUTE HEALTH EFFECTS
EYES: Contact causes eye irritation.
SKIN: Prolonged or repeated contact can result in defatting and
drying of the skin which may result in skin irritation
dermatitis (rash).
INHALATION: Inhalation may cause dizziness, headaches and irritate
respiratory tract. Inhalation of high concentrations of
vapors may cause heart irregularities, unconsciousness
or death. Vapors reduces oxygen available for breathing.
INGESTION; May be harmful if swallowed. Not considered a potential
route of entry.
TARGET ORGAN EFFECTS;
Central nervous system, heart, lungs.
Recommended Exposure Limits: See Section 2
Signs and Symptoms of Exposure
EYES; Contact produces burning and redness.
SKIN: Irritating to the skin with possible drying and defatting of
the skin.
INHALATION: Vapors or mists, in excess of permissible
concentrations, or in unusually high concentrations
generated from spraying, heating the material or as from
exposure in poorly ventilated areas or confined spaces,
may cause irritation of the nose, throat, headache,
nausea and drowsiness.
INGESTION: May result in severe irritation of the mouth, throat and
stomach.
Medical Conditions Generally Aggravated By Exposure.
Because of its irritating properties, repeated skin contact may
aggravate an existing dermatitis.
OSHA Hazard Classes:
HEALTH HAZARDS: Irritant
PHYSICAL HAZARDS; Combustible Liquid
TARGET ORGANS & EFFECTS: Lungs, Heart, Eyes, Skin, Central Nervous
System, Respiratory System
4. FIRST AID MEASURES
Emergency and First Aid Procedures
EYES: Check for and remove any contact lenses. Immediately flush
eyes with large amounts of water for 15 minutes or until
irritation subsides. Get medical attention if irritation
persists.
SKIN: Wash with soap and water. Get medical attention if irritation
develops or persists.
INHALATION: If a person breathes in large amounts of this product,
move the exposed person to fresh air at once. If
breathing becomes difficult, administer oxygen and seek
immediate medical attention. If breathing has stopped,
give artificial respiration, then oxygen if needed.
INGESTION: If swallowed, do not induce vomiting. Seek medical
attention.
5. FIRE FIGHTING MEASURES
Flash Pt: 110.00 F (43.3 C) Method Used: PMCC
Explosive Limits LEL: No data. UEL: No data
Autoignition Pt: No data
Fire Fighting Instructions
A self-contained breathing apparatus and protective clothing should
be worn in fighting fires involving chemicals. Containers can build up pressure
if exposed to heat (fire) Keep fire exposed containers cool with water spray.
Vapors are heavier than air and may travel along the ground to some source of
ignition and flashback.
Flammable Properties and Hazard
Extremely Flammable. Material can be ignited by flame or spark at
room temperatures. Vapors can travel to a source of ignition and flash back.
Hazardous Combustion Products
Oxides of carbon, primarily carbon dioxide, carbon monoxide and
incompletely combusted hydrocarbons.
Extinguishing Media
Dry Chemicals, CO2 or Alcohol Resistant Foam.
Unsuitable Extinguishing Media
No data available.
6. ACCIDENTAL RELEASE MEASURES
Steps to Be Taken In Case Material Is Released Or Spilled
Ventilate area. Avoid breathing vapor. Eliminate all sources of
ignition. Wear appropriate personal protective equipment, including respiratory
protection. Contain spill if possible. Wipe up or absorb on suitable
material and shovel up. Keep out of sewers and drains. Avoid contact with
skin, eyes, and clothing.
7. HANDLING AND STORAGE
Hazard Label Information:
WARNING! Vapors are flammable. Harmful if swallowed.
Precautions To Be Taken In Handling
Avoid breathing harmful vapors. Avoid contact with eyes, skin, and
clothing. Do not puncture or incinerate. Keep out of reach of children. Use
proper grounding methods when transferring material from containers.
Precautions To Be Taken in Storing
Store in cool well ventilated area away from heat, sparks, open
flame, or other sources of ignition.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Equipment (Specify Type)
Use in a well ventilated area. Use NIOSH/MSHA approved respirator if
levels of air contamination is likely to exceed allowable levels.
Eye Protection
Safety glasses, chemical safety goggles or face shield recommended to
prevent eye contact.
Protective Gloves
Rubber or neoprene gloves is recommended.
Other Protective Clothing
Boots, aprons, or coveralls as necessary to prevent skin contact.
Engineering Controls (Ventilation etc.)
Adequate to meet occupational exposure limits. See Section II.
Work/Hygienic/Maintenance Practices
Do not smoke while using. Wash hands after use. Use good personal
hygiene at all times.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States: { } Gas {X} Liquid { } Solid
Melting Point: N.A. - N.A.
Boiling Point: No data.
Autoignition Pt: No data.
Flash Pt; 110.00 F (43.3 C) Method: PMCC
Explosive Limits; LEL: No data. UEL: No data.
Specific Gravity (Water = 1): 0.77 - 0.8
Vapor Pressure (vs. Air or mm Hg): No data.
Vapor Density (vs. Air = 1): No data.
Evaporation Rate (vs Butyl Acetate = 1): No Date
Solubility in Water: No data
Percent Volatile: 0.0 % by weight.
VOC / Volume: 48.0000 WT%
Corrosion Rate: No data.
pH: N/A
Appearance and Odor
Liquid is clear with a solvent type odor.
10. STABILITY AND REACTIVITY
Stability: Unstable { } Stable {X}
Conditions To Avoid - Instability
Open flames and extremely high temperatures.
Incompatibility - Materials to Avoid
Alkaline earth metals. Strong Acids. Strong alkalis, Strong
oxidizers.
Hazardous Decomposition Or Byproducts
Decomposes at high temperatures forming oxides of carbon and
silicone.
Hazardous Polymerization: Will occur { } Will not occur {X}
Conditions To Avoid - Hazardous Polymerization
Product will not undergo polymerization
11. TOXICOLOGICAL INFORMATION
Toxicological Information
No data available.
Carcinogenicity/Other Information
No known carcinogens present.
Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No
12. ECOLOGICAL INFORMATION
Ecological Information
No data available.
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method
All notification, clean up and disposal should be carried out in
accordance with federal, state and local regulations.
14. TRANSPORT INFORMATION
LAND TRANSPORT (US DOT)
DOT Proper Shipping Name
Flammable liquids, n.o.s. (petroleum distillates, hexane), 3 UN1993,
PG III
DOT Hazard Class: 3
DOT Hazard Label: FLAMMABLE LIQUID
UN/NA Number: UN1993
DOT Packing Group; III
Additional Transport Information
DOT Hazard determination may be reclassed according to 49 CFR 173.150.
15. REGULATORY INFORMATION
US EPA SARA Title III
Hazardous Components CAS # Sec.302 Sec.304 Sec.313 Sec. 110
(Chemical Name) (EHS) RQ (TRI)
--------------------------------------------------------------------------------
1. Hexane, Light 64742-89-8 No No No No
aliphatic naptha
2. Hydrotreated light 64742-47-8 No No No No
distillate (petroleum)
3. Polydimethylsiloxane 63148-62-9 No No No No
US EPA CAA, CWA, TSCA
Hazardous Components CAS # EPA CAA EPA CWA EPA TSCA CA PROP
(Chemical Name) NPDES 65
--------------------------------------------------------------------------------
1. Hexane, Light 64742-89-8 No No No No
aliphatic naptha
2. Hydrotreated light 64742-47-8 No No No No
distillate (petroleum)
3. Polydimethylsiloxane 63148-62-9 No No 8A,8A PAIR No
SARA (Superfund Amendments and
Reauthorization Act of 1986) Lists:
Sec. 302: EPA SARA Title III Section 302 Extremely Hazardous
Chemical with TPQ.
* indicates 10000 LB TPQ if not volatile.
Sec. 304: EPA SARA Title III Section 304: CERCLA Reportable +
Sec. 302 with Reportable Quantity.
** indicates statutory RQ.
Sec. 313; EPA SARA Title III Section 313 Toxic Release Inventory.
Note: - Cat indicates a member of a chemical category.
Sec. 110: EPA SARA 110 Superfund Site Priority Contaminant List.
TSCA (Toxic Substances Control
Act) Lists:
5A (2): Chemical subject to Significant New Rules (SNURS)
6A; Commercial Chemical Control Rules
8A; Toxic Substances Subject To Information Rules on Production
8A CAIR: Comprehensive Assessment Information Rules - (CAIR)
8A PAIR: Preliminary Assessment Information Rules - (PAIR)
8C: Records of Allegations of Significant Adverse Reactions
8D: Health and Safety Data Reporting Rules
8D TERM: Health and Safety Data Reporting Rule Terminations
Other Important Lists:
CWA NPDES: EPA Clean Water Act NPDES Permit Chemical
CAA HAP: EPA Clean Air Act Hazardous Air Pollutant
CAA ODC: EPA Clean Air Act Ozone Depleting Chemical (1=CFC, 2=HCFC)
CA PROP 65: California Proposition 65
Regulatory Information
Prop 65: No chemicals which currently appear on California's
Proposition 65 Carcinogen or reproductive hazard lists are known to be present
in this product.
SARA Title III, Section 313: No chemicals are known to be present in
this product subject to the reporting requirements of Section 313.
EPA Hazard Categories:
This material meets the EPA 'Hazard Categories' defined for SARA
Title III Sections 311/312 as indicated:
{X} Yes { } No Acute (immediate) Health Hazard
{X} Yes { } No Chronic (delayed) Health Hazard
{X} Yes { } No Fire Hazard
{ } Yes {X} No Reactive Hazard
{ } Yes {X} No Sudden Release of Pressure Hazard
Regulatory Information Statement
The information contained herein is based on data considered
accurate. However, no warranty is expressed or implied regarding the accuracy of
this data or the results to be obtained from the use thereof. Vendor assumes no
responsibility for injury to vendee or third person proximately caused by the
material if reasonable safety procedures are not adhered to as stipulated in the
data sheet. Additionally, vendor assumes no responsibility for injury to vendee
or third persons proximately caused by abnormal use of the material even if
reasonable safety procedures are followed. Further more, vendee assumes all
risk in use of the material.
16. OTHER INFORMATION
Company Policy or Disclaimer
THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED, EXCEPT
THAT IS ACCURATE TO THE BEST KNOWLEDGE OF EXCELDA MANUFACTURING. THE DATA ON
THIS SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED HEREIN. EXCELDA
MANUFACTURING ASSUMES NO LEGAL RESPONSIBILITY FOR USE OR RELIANCE UPON THIS
DATA.
Licensed to Excelda Manufacturing, Inc. ANSI Z400.1 Format
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
Printer-Friendly View
