MSDS 4603-4

MSDS MATERIAL SAFETY DATA Sheet
     The Blaster Chemical Companies, Inc.               'BLASTER'
    
                 PB Penetrating Catalyst
MSDS Number: PB - bulk                                Revision Date: 3/14/06
                                                       
                                                                


 1            PRODUCT AND COMPANY IDENTIFICATION


Product Name:         PB Penetrating Catalyst
Revision Date:        3/14/06
MSDS Number:          PB - bulk
Common Name:          PB Blaster
Product Code:         128-PB, 5-PB & 55-PB


Manufacturer:         The Blaster Chemical Companies, Inc.
                      8500 Sweet Valley Drive
                      Valley View, Ohio 44125

                      (216) 901-5800
                      (216) 901-5801 fax
                      www.blasterproducts.com

 2            COMPOSITION/INFORMATION ON INGREDIENTS
 Ingredients:

 Cas #          Chemical Name                            Perc.
 ----------------------------------------------------------------
 64742945   | Solvent naphtha, petroleum, heavy arom.  |  40-50%
 64742478   | Distillates, petroleum, hydrotreated lig |  30-40%
 64742650   | Distillates, petroleum, solvent-dewaxed  |  20-30%
 68131408   | Alcohols, C11-15-secondary, ethoxylated  |  0-3%

 ** Naptha solvent contains 1-7% Napthalene (91-20-3) and 0-1% Pseudocumene
(95-63-6)


 3            HAZARDS IDENTIFICATION
Route of Entry:    Eyes, skin, inhalation, ingestion
Target Organs:
Inhalation:        Inhalation of spray mist may cause irritation to the         
          respiratory tract.
Skin Contact:      Repeated or prolonged contact with skin may cause mild       
            irritation and possibly dermatitis.
Eye Contact:       Likely to cause immediate or delayed irritaion.              
     Irritation will show as redness and/or swelling of the
                   eyes.
Ingestion:         Ingestion may cause irritation to the mouth, esophagus and   
                stomach.


May aggravate pre-existing skin and respiratory disorders.

Notice: Reports have associated repeated and prolonged occupational overexposure
to solvents with permanent brain and nervous system damage. Intentional misuse
by deliberately concentrating and inhaling the contents may be harmful or fatal.

       
                       
  4            FIRST AID MEASURES

Inhalation:     Remove to fresh air. If not breathing, give artificial          
                respiration. If breathing is difficult, give oxygen. Continue
                to monitor. Get medical attention.
Skin Contact:   Remove contaminated clothing immediately! Wash skin with soap   
                and water. If irritation develops, seek medical attention.
Eye Contact:    Flush eye(s) with water for 15 minutes. Get medical attention.  
              If eye irritation persists, obtain medical treatment.
Ingestion:      Do not induce vomiting.! Get medical attention immediately!


 5            FIRE FIGHTING MEASURES

Flash point:     155 degrees F ASTM D-56 (TCC)

Extinguishing Media: Dry chemical, carbon dioxide, halon or foam is recommended.
Water spray may be used to cool containers or structures. Halon may decompose
into toxic materials and carbon dioxide will displace oxygen. Take
precautions when using these materials.

General Fire and Explosion Hazards: This material may be ignited by heat, sparks
(static electricity), flame or other ignition sources. Vapors are heavier than
air and will collect in low areas (sewers) and can travel considerable
distances. If containers are not cooled in a fire, they may explode.

Fire Fighting Procedures: Emergency responders should wear self-contained
breathing apparatus. Wear other protective gear as conditions warrant. Keep
unauthorized people out. Try to contain spills or leaks if it can be done
safely. Material will float on water. Avoid spreading.




 6            ACCIDENTAL RELEASE MEASURES
In case of spill or release, avoid vapors and ignition sources. Use appropriate
protective devices and absorbents. Stop and contain the discharge if it can be
done safely. Keep out of drains and waterways. Handle with trained personnel
only. Notify authorities as required by law.


 7            HANDLING AND STORAGE
Handling Precautions:  Use in accordance with good industrial workplace         
              practices. Avoid unnecessary contact. Wash thoroughly             
          after handling. Use with good ventilation.
Storage Requirements:  Store in a dry place away from excessive heat. Store     
                  containers with lids on and properly labeled.

                       Do not store at temperatures above 120 degrees F.

       
  
 8             EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Controls:    Eye wash stations and emegrency showers should be      
                   immediately available.
Protective Equipment:
                         Eyes and Face: Standard safety glasses with splash     
                    shields typically offer adequate protection. Where          
               excessive splashing or spraying is possible, a face              
           shield should be used.

                         Skin and clothing: Excessive contact should be avoided.
                         Neoprene gloves, boots and aprons will provide adequate
                         protection when contact cannot be avoided. Remove and  
                       wash any contaminated clothing immediately. Wash         
                thoroughly after handling.

                         Respiratory: Good general ventilation should be        
                 sufficient to control airborne levels. Maintain
                         airborne concentrations below OSHA established exposure
                         limits of ingredients in Section 2.

Exposure Guidelines/Other: The Blaster Chemical Companies takes no              
           responsibility for determining what measures are
                         required for personal protection in any specific       
                  application. This information should be used
                         with discretion.

 9             PHYSICAL AND CHEMICAL PROPERTIES

Appearance:        Orange viscous oily
Physical State:    Liquid                  Boiling Point:        352 F
Odor:              Heavy aromatic          Freezing/Melting Pt.: Not            
                                                                determined      
                                       
pH:                Not determined          Solubility:           nil
Vapor Pressure:    Not determined          Spec Grav./Density:   0.87 (water=1)
Vapor Density:     >1 (air = 1)

Heat Value:            Not determined
VOC:                   Not determined
Evap. Rate:            >1 (NBA = 1)
Bulk Density:          Not determined
Octanol:               Not applicable
Molecular Weight:      Not determined
Particle Size:         Not applicable
Softening Point:       Not applicable
Viscosity:             Not determined
Percent Volatile:      Not determined
Sat. Vap. Concentrat.: Not determined
Molecular Formula:     Not determined


 10            STABILITY AND REACTIVITY
Stability:                This product is stable.
Conditions to avoid:      Avoid excessive heat, sources of ingition and         
                 excessive water.
Materials to avoid (incompatability):    Avoid contact with strong oxidizing    
                      agents and strong reducing agents (strong acids
                          or bases.) Avoid mixture with water.
Hazardous Decomposition products: Carbon monoxide, carbon dioxide, and various  
                        hydrocarbons.
Hazardous Polymerization: Will not occur.


       
 11           TOXICOLOGICAL INFORMATION
Toxicological information on this product as a mixture has not been determined.
See section 15 for reportable ingredients.


 12           ECOLOGICAL INFORMATION
Ecological information on this product as a mixture has not been determined.


 13           DISPOSAL CONSIDERATIONS
Used or unused product should be disposed of in accordance with local, state,
and federal regulations. Some special regulations may exist for the disposal 
of empty aerosol containers.

Empty containers may contain residual pressure and contents. They should be
handled with the same precautions as the product.


 14           TRANSPORT INFORMATION
 Dept. of Transportation (DOT):

         Proper shipping name: Flammable Liquid, n.o.s. (petroleum distillates)
         Hazard class:     3
         UN #:            1993
         Packing Group:   III


This product may be packaged to meet the definitions set forth in CFR 49 part
173.150c as a "consumer commodity."
Allowing for certain exceptions (173.156) for domestic surface shipments.

Please call The Blaster Chemical Companies for clarification or questions
regarding proper shipping information.
      
                            

 15           REGULATORY INFORMATION
COMPONENT / (CAS/PERC) / CODES
----------------------------------------------------------------
*Distillates, petroleum, solvent-dewaxed heavy paraffinic (64742650 20-30%) NJHS


*Naphthalene (91203 0-1%) CERCLA, CSWHS, EPCRAWPC, HAP, MASS, NJHS, OSHAWAC, PA,
PRIPOL,
SARA313, TOXICPOL, TOXICRCRA, TXAIR, TXHWL

*Pseudocumene (95636 0-1%) MASS, NJHS, PA, SARA313, TXAIR


REGULATORY KEY DESCRIPTIONS
----------------------------------------------------------------
MASS = MA Massachusetts Hazardous Substances List
OSHAWAC = OSHA Workplace Air Contaminants
PA = PA Right-To-Know List of Hazardous Substances
TXAIR = TX Air Contaminants with Health Effects Screening Level


16           OTHER INFORMATION
Manufacturer's Disclaimer:
To the best of our knowledge, the information contained herein is accurate.
However, neither The Blaster Chemical Companies nor any of its subsidiaries
assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability of any material
is the sole responsibility of the user. All materials may
present unknown hazards and should be used with caution. Although certain
hazards are described herein, we cannot guarantee that these are the only hazard
which exists.

HMIS Ratings:                  NFPA Ratings:
      Health:        2            Health:         2
      Fire:          2            Fire:           2
      Reacitivity:   0            Reacitivity:    0


                             END OF MSDS DOCUMENT

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2010 Imperial Supplies LLC Questions or comments? Contact us.