LOGIN
Login E-mail:
Password:

Apply for an account! »
Product Search
Bottom
 

MSDS 4210

4210: Trounce Hand Cleaner 1 Gal [4]
MSDS Last updated: 09/12/2007

Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106  USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: 813-248-0585

                       MATERIAL SAFETY DATA SHEET

1. PRODUCT IDENTIFICATION
Product Name:    TROUNCE HAND CLEANER LOTION 1 Gal.
Item No:         21218
Product Type:    Waterless hand cleaner

2. COMPOSITION/INFORMATION ON INGREDIENTS
Component       Weight %        ACGIH TLV: TWA           OSHA PEL:

Water            50-60           Not Listed              Not Listed
7732-18-5

Distillates      25-35           Not Listed             100 ppm TWA
(Petroleum),
Hydro treated
Light
64742-47-8

Tall Oil         1-10           10 mg/m3 TWA            Not Listed
Fatty Acid
61790-12-3

Pumice           1-10           10 mg/m3 (inhal)      15 mg/m3 (total)
1332-09-8                        3 mg/m3 (resp)        5 mg/m3 (resp)

Propoxylated     1-10            Not Listed             Not Listed
Ethoxylated
Linear C10-C12
Alcohol
68154-97-2

Silica, Quartz   0.1-1.0         0.05 mg/m3 TWA        0.1 mg/m3 TWA
14808-60-7                        respirable            respirable

3. HAZARDS IDENTIFICATION
Toxicity:  May irritate the eyes.
Primary Routes of Entry: Eye and skin contact, ingestion, inhalation.
Signs and Symptoms of Exposure:  Contact with eyes may cause tearing and
                 redness. Excessive accidental exposure may cause
                 headache., dizziness, nausea and mild respiratory
                 irritation.

Component            Weight %    NTP       ACGIH                 IARC
                                         Carcinogens
Silica, Quartz     0.1-1.0               A2 - Suspected        Group 1:
14808-60-7                                  Human              Monograph
                                          Carcinogen           68, 1997
                                                               (inhaled)

Medical Conditions Recognized as        None known.
Being Aggravated by Exposure:

4. FIRST AID MEASURES
Ingestion:       If swallowed, DO NOT induce vomiting.
                 Keep individual calm. Obtain medical attention.
Inhalation:      Move to fresh air in case of accidental inhalation
                 of vapors.
Skin Contact:    Flush with copious amounts of water.
Eye Contact:     In case of contact, immediately flush eyes with plenty
                 of water for at least 15 minutes and get medical
                 attention if irritation persists.

5. FIRE FIGHTING MEASURES
Flash Point (F/C):                 >200 degrees F  PMCC
Recommended Extinguishing Media:   Carbon dioxide, chemical powder
Special Fire-Fighting Procedures:  No special procedures.
Hazardous Products of Combustion:  Oxides of carbon
Unusual Fire/Explosion Hazards:    None.

Lower Explosive Limit: Not determined.
Upper Explosive Limit: Not determined

6. ACCIDENTAL RELEASE MEASURES
Spill Procedures:      Rinse away with water or wipe up with a towel.

7. HANDLING AND STORAGE
Storage:         Hand cleaner should be stored at temperatures between
                 40 degrees F. and 100 degrees F.
Handling:        Follow all general safety precautions.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Eyes;                     Not normally required
Skin:                     Not required.
Ventilation:              Provide adequate ventilation.
Respiratory Protection:   Not required under normal use.

9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:              White lotion with pumice.
Odor:                    PLEASANT
Boiling Point:           >200 degrees F
pH:                      7.5-8.5
Solubility in Water:     SOLUBLE
Specific Gravity:        0.94
VOC Content(Wt.%):       <2% by weight
Vapor Pressure:          Not determined
Vapor Density (Air=1):   Heavier than air
Evaporation Rate:        <1 (butyl acetate = 1)

10. STABILITY AND REACTIVITY
Chemical Stability:                Stable at normal conditions.
Hazardous Polymerization:          WILL NOT OCCUR.
Incompatibilities:                 None known.
Conditions to Avoid:               Freezing
Hazardous Products of Combustion:  Oxides of carbon

11. TOXICOLOGICAL INFORMATION
See Section 3

12. ECOLOGICAL INFORMATION
No data available

13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal:  Dispose of uncontaminated material through
sewer system with permission of the authority responsible for that system.
US EPA Waste Number:   NH - Not a RCRA Hazardous Waste Material

14. TRANSPORTATION INFORMATION
DOT  (49CFR 172)
Domestic Ground Transport
      DOT Shipping Name:     Unrestricted
      Hazard Class:          None
      UN/ID Number:          None
      Marine Pollutant:      None

IATA
      Proper Shipping Name:  Not regulated
      Class or Division:     None
      UN/NA Number:          None

IMDG
      Proper Shipping:       Unrestricted
      Hazard Class:          None
      UN Number:             None


15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313
Toxic Chemical.

NONE

CALIFORNIA PROP 65:
No California Prop 65 chemicals are known to be present at or above the No
Significant Risk Level.

TSCA Inventory Status:
Listed on Inventory:  YES All components of this product are listed (or exempt)
on the EPA TSCA inventory.

16. OTHER INFORMATION
Estimated NFPA Rating:           Health 1, Flammability 1, Reactivity 0
Estimated HMIS Classification:   Health 1, Flammability 1, Physical Hazard 0
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.

Prepared By:  Denise Boyd, Health and Safety Manager   Revision Date:
                                                       April 27/2007
Company:  Permatex, Inc. 10 Columbus Blvd. Hartford, CT USA 06106
                                                       Revision   2
                                                       Number:

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

For more product information by email, click here

Imperial Supplies LLC does not provide services and products outside the United States

credit card logos