MSDS 4039

GPMI Company                 GPMI  Company
                             1051 N. Fiesta Blvd.
                             Gilbert, AZ 85233

                                 MSDS
                       MATERIAL SAFETY DATA SHEET

PRODUCT:    RUBBER, PLASTIC AND VINYL PROTECT ANT

SECTION 1 - IDENTIFICATION OF PRODUCT AND COMPANY

Product (Trade) Name:  PROTECT ANT      NPCA Hazardous Materials
Manufacturer's Name:   GPMI Company     Rating Identification System
Street Address:        1051 N. Fiesta Blvd.  4 = Extreme    Health :        1
City, State, Zip:      Gilbert, AZ  85233    3 = High       Flammability:   0
Phone Number:          480-503-0006          2 = Moderate   Reactivity:     0
Emergency Phone:       480-503-0006          1 = Slight  SpecialProtection: 0
Chemical Name & Synonyms:  Blend of Dimethyl silicones   0 = Insignificant
Chemical Family:
Formula:               Trade Secret          Date Issued:  09/01/05

SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS

Proprietary Blend of Dimethyl silicones

SECTION 3 - PHYSICAL DATA

Boiling Point:           212 F              Specific Gravity (H2O=1):    1.04
Vapor Pressure (mm hg):  N/A                Vapor Density:               1
Solubility in Water:     Completely         Percent Volatile by Weight:  N/D
Evaporation Rate:        1                   Melting Point:              N/A
Appearance:              Milky liquid       Freezing Point:              32 F
Odor:                    Mild soap like scent    Volatiles:              N/D
pH:                      8.0 - 9.0          Percent Active:              N/D

SECTION 4 - FIRE & EXPLOSION HAZARD DATA

Flash Point (method used):   >400 F
Upper Explosive Limit:       N/A
Lower Explosive Limit:       N/A
Extinguishing Media:         N/A
Special Fire Fighting Procedures:  Product not considered combustible.
                                   None Identified.
Unusual Fire & Explosion Hazards:  None Identified.

SECTION 5 - REACTIVITY DATA

Stability:                              Stable
Conditions to Avoid:                    Excessive heat. Contamination.
Incompatibility (Materials to Avoid):   Strong Acids. Oxidizers
Hazardous Decomposition Products:       None Identified.
Hazardous Polymerization:               Will not occur.

SECTION 6 - HEALTH HAZARDS & FIRST AID

Route(s) of Entry:           Skin, Ingestion.
Effects of Overexposure
By Inhalation:               May cause irritation of nose, mouth.
By Eye Contact:              Mild irritation.
By Ingestion:                Nausea.
By Skin Contact:             Mild irritation, avoid prolonged contact.
Emergency & First Aid Procedures:
For Inhalation:              Move to fresh air.
For Eye Contact:             Flush eyes for 15-30 minutes.
                             Do not induce vomiting. Drink large amounts of
                             water.
For Ingestion:               Seek medical attention.
For Skin Contact:            Wash with soap and water.

SECTION 7 - STORAGE & HANDLING INFORMATION

Normal care in handling & storage. Keep in cool dry area. Keep from
freezing. Store no more than 1 year. Keep out of reach of children.

SECTION 8 - SPILL OR LEAK PROCEDURES

Small or Large Spill:  Mop up spills. Keep out of sewage systems.
Waste Disposal Method: Dispose of in accordance with state, local, federal
                       law.

SECTION 9 - SPECIAL PROTECTION INFORMATION

For Handling Product as Supplied:
Respiratory Protection:      N/A        Ventilation:                N/A
Protective Gloves:           N/A        Other Protective Equipment: N/A
Eye Protection:              N/A
For Handling Product After Dilution For Use:
Respiratory Protection;      N/A        Ventilation:                N/A
Protective Gloves:           N/A        Other Protective Equipment: N/A
Eye Protection:              N/A

SECTION 10 - ADDITIONAL INFORMATION

N/A = Not Applicable      N/D = Not Determined    N/E = Not Established

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.