MSDS 4038

GPMI Company           GPMI Company
                       1051 N. Fiesta Blvd.
                       Gilbert, AZ  85233


                                MSDS
                       MATERIAL SAFETY DATA SHEET

PRODUCT:    ALL PURPOSE CLEANER / DEGREASER

SECTION 1 - IDENTIFICATION OF PRODUCT AND COMPANY

                       All Purpose
Product (Trade) Name:  Cleaner/Degreaser     NPCA Hazardous Materials
Manufacturer's Name:   GPMI Company          Rating Identification System
Street Address:        1051 N. Fiesta Blvd.  4 = Extreme   Health: 1
City, State, Zip:      Gilbert, AZ 85233     3 = High     Flammability: 0
Phone Number:          480-503-0006          2 = Moderate   Reactivity: 0
Emergency Phone:       480-503-0006          1 = Slight  Special Protection 0
Chemical Name & Synonyms:                    0 = Insignificant
Chemical Family:
Formula:               Trade Secret

SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS

Proprietary Formula


SECTION 3 - PHYSICAL DATA

Boiling Point:               212 F            Specific Gravity (H2O=1):   1.0
Vapor Pressure (mm hg):      >17              Vapor Density:              1
Solubility in Water:         Completely       Percent Volatile by Weight: N/D
Evaporation Rate:            1                Melting Point:              N/A
Appearance:                  Clear liquid     Freezing Point:             32 F
Odor:                        Mild soap        Volatiles:                  N/D
pH:                          9.2 - 10.0       Percent Active:             N/A

SECTION 4 - FIRE & EXPLOSION HAZARD DATA

Flash Point (method used):           None
Upper Explosive Limit:               N/A
Lower Explosive Limit:               >212 F
Extinguishing Media:                 N/A
Special Fire Fighting Procedures:    Product not considered combustible.
                                     None identified.
Unusual Fire & Explosion Hazards:    None identified


SECTION 5 - REACTIVITY DATA

Stability:                        Stable
Conditions to Avoid:              Temperature extremes
Incompatibility (Materials to Avoid):
Hazardous Decomposition Products: Carbon oxides
Hazardous Polymerization:         Will not occur.

SECTION 6 - HEALTH HAZARDS & FIRST AID

Route(s) of Entry:           Skin. Ingestion
Effects of Overexposure
By Inhalation:         May cause irritation of nose, mouth.
By Eye Contact:        May result in painful irritation.
By Ingestion:          Irritation if swallowed.
By Skin Contact:       Irritation may occur with prolong exposure.
Emergency & First Aid Procedures:
For Inhalation:        Move to fresh air. Seek medical attention if
                       irritation persists.
For Eye Contact:       Flush eyes for 15-30 minutes.
                       Drink large amount of water. Induce vomiting.
For Ingestion:         Seek medical attention.
For Skin Contact:      Flush with water for 15-30 minutes.

SECTION 7 - STORAGE & HANDLING INFORMATION

Normal care in handling & storage. Keep in cool dry area. Keep from
freezing. Store no more than 1 year. Keep out of reach of children.

SECTION 8 - SPILL OR LEAK PROCEDURES

Small or Large Spill:  Mop and rinse with plenty of water.
                       Dispose of in accordance with state, local, federal
                       law.
Waste Disposal Method: Small amounts may be disposed of in sewer if diluted
                       with water.

SECTION 9 - SPECIAL PROTECTION INFORMATION

For Handling Product as Supplied:
Respiratory Protection:  N/A                Ventilation:                   N/A
Protective Gloves:       Rubber for exten.  Use Other Protective Equipment N/A  
Eye Protection:          Rec. splash goggles
For Handling Product After Dilution For Use:
Respiratory Protection:  N/A                Ventilation:                N/A
Protective Gloves:       N/A                Other Protective Equipment: N/A
Eye Protection:          N/A
SECTION  10 - ADDITIONAL INFORMATION

N/A = Not Applicable     N/D = Not Determined    N/E = Not Established

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.

© 2008 Imperial Supplies LLC Questions or comments? Contact us.