Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 551 -- [Back] | |||
|
MSDS 551 551: Sample [1] (DISCONTINUED)MSDS Last updated: 01/04/2010
IMPERIAL SUPPLIES LLC MSDS SHEET FOR 5510
BF1212 - DOT 3 Brake Fluid
**** SECTION 1 - CHEMICAL PRODUCT AND MANUFACTURER IDENTIFICATION ****
Product Name: BF1212 - DOT 3 Brake Fluid
Part Number:
Product CAS: (none)
Product Code: N/A
Synonyms: BF1212 - DOT 3 Brake Fluid
Manufacturer Gold Eagle Company
Identification 4400 S. Kildare Blvd.
Chicago, IL 60632-4372
For information call: 773-376-4400
Emergency Number: N/A
Emergency Agency: INFOTRAC
Agency Number: 1-800-535-5053
MSDS Effective Date: 7/17/2003
MSDS Supersedes Date: 4/8/2008
Miscellaneous:
Product CAS: Mixture
Chemical name: Glycols, Poly.
Brief description: DOT 3 Brake Fluid for use in brake systems.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
Chemical Name CAS MIN MAX
Diethylene Glycol Monomethyl Ether 111-77-3 0 2.5
Dimethylene Glycol Monoethyl Ether 111-90-0 0 2.5
Diethylene Glycol Monobutyl Ether 112-34-5 0 3.5
Triethylene Glycol Monomethyl Ether 112-35-6 0 18
Treithylene Glycol Monoethyl Ether 112-50-5 0 14
Triethylene Glycol Monobutyl Ether 143-22-6 0 38
Miscellaneous:
CHEMICAL NAME LIMIT VALUES
Diethylene Glycol Monobutyl Ether N/A
Diethylene Glycol Monoethyl Ether N/A
Diethylene Glycol Monomethyl Ether N/A
Triethylene Glycol Monobutyl Ether N/A
Triethylene Glycol Monoethyl Ether N/A
Triethylene Glycol Monomethyl Ether N/A
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW:
NFPA: Health: 2 Fire: 1 Reactivity: 0 Specific Hazard: N/A
HMIS: Health: 2 Flammability: 1 Reactivity: 0 PPE: B
Miscellaneous:
This product does not contain any components above de minimus concentrations
that are considered carcinogenic by OSHA, IARC or NTP.
POTENTIAL HEALTH EFFECTS
Target Organs/Primary Route(s) of Entry:
Eye May cause moderate to severe irritation and moderate transient
corneal injury depending upon concentration of the glycol ether.
Skin May cause irritation if left in contact with skin. Contact with
large areas of skin for extended periods of time may result in
absorption of toxic amounts.
Ingestio May cause irritation of the GI tract and central nervous system
n disturbances.
Inhalati Inhalation of mists may cause respiratory tract irritation, and
on central nervous system effects including: headache, narcosis,
weakness, slurred speech and blurred vision.
Miscellaneous:
**** SECTION 4 - FIRST AID MEASURES ****
Eye If the product contacts the eyes, immediately wash the eyes with
large quantities of room temperature water for at least 15 minutes,
occasionally lifting the lower and upper lids. Get medical
attention immediately. A Follow up visit to an opthalmologist
should be made.
Skin If the product contacts the skin, promptly wash the contaminated
skin with soap and water for at least 15 minutes. If the product
penetrates the clothing, promptly remove the clothing and wash the
skin with soap and water.
Ingestion If this product is ingested and the person is conscious, have
patient drink several glasses of water. Induce vomiting by having
patient tickle back of throat with finger, keep airway clear. GET
IMMEDIATE MEDICAL ATTENTION.
Inhalatio Move the exposed person to fresh air at once and call emergency
n medical care. If breathing has stopped, give artificial
respiration. If breathing is difficult, give humidified oxygen.
Notes to Physician No data available.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
Flash Point: GT 250 F. (GT 121 C.) PMCC
Auto Ignition N/a
Temperature:
Flammable Limits
Lower Limit: Explosive Limit (LEL) : N/A
Upper Limit: Explosive Limit (UEL) : N/A
Extinguishing Media: Use water spray, alcohol foam, dry chemical, or
carbon dioxide.
Unusual Fire and Explosion Water or foam may cause frothing.
hazards:
Special Fire Fighting Wear NIOSH approved SCBA respirator in the
Procedures: positive pressure mode and chemical protective
clothing
General Information:
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
Small Remove sources of heat or ignition, provide adequate ventilation,
Spill: contain leak using absorbent, inert, non-combustible material.
Large Contain spill, transfer to secure containers. In the event of an
Spill: uncontrolled material release, the user should determine if release
is reportable under applicable laws and regulations.
**** SECTION 7 - HANDLING AND STORAGE ****
Handling: See other sections of MSDS.
Storage: See other sections of MSDS.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
GENERAL HYGIENE Use normal hygiene practices.
CONSIDERATIONS:
OTHER PRECAUTIONS: None
ENGINEERING CONTROLS:
Local Exhaust: Provide local ventilation to maintain exposure
levels below recommended exposure limits.
Mechanical (General): In confined spaces, mechanical ventilation may
be required.
Special Ventilation: N/A
Other Ventilation: N/A
PERSONAL PROTECTIVE EQUIPMENT
Eyes/face: Use splash proof chemical, safety glasses or appropriate
full-face respirator.
Skin: Use chemical resistant gloves such as butyl rubber or PVC
coated as required.
Respirators: If high vapor or mist concentrations are expected, use
appropriate NIOSH approved respirator for organic vapors and
mists. Respirators must be selected based on airborne levels
found in workplace and must not exceed the working limits of
the respirator.
Other Protective If there is a possibility of exposure of an individual's body
Clothing/Equipme to the lubricating oil, wear body covering clothes to avoid
nt: prolonged or repeated exposure.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Appearance/Odor: Amber color, clear liquid, mild odor.
pH: 8.5 - 10.0
Vapor Pressure: (MM HG) : N/A
Vapor Density (Air=1): GT 1.0
Evaporation Rate: N/A
Viscosity: N/A
Boiling Point: GT 450 F (GT 232 C.)
Freezing/Melting Point: N/A
Decomposition Temperature: N/A
Solubility in Water: Soluble
Specific Gravity: 1.05
Molecular Formula: N/A
Molecular Weight: N/A
VOC Coating (minus water): 0 Lbs/Gallon
Coating Density: 0 Lbs/Gallon
Solvent Density: 0 Lbs/Gallon
Percent Solvent (volume): 0
Percent Solids (volume): 0
Percent Water (volume): 0
Percent Volatile by Weight: 0
Miscellaneous:
% volatile/Volume: N/A
Percent Solvent (Volume): N/A
Percent Solids (Volume): N/A
Percent Water (Volume): N/A
Poly Glycol based product containing a proprietary inhibitor package.
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable: Yes
Conditions to Store in a cool, dry, well ventilated area. Keep away from
Avoid: heat, sparks, and flame. Avoid open heating or agitation;
keep container tightly closed when not in use.
Incompatibilities with Other Materials:
(Materials to avoid): Avoid contact with strong oxidizers and high
oxygen concentrations.
Hazardous Decomposition Incomplete combustion can generate carbon
Products: monoxide and/or oxygenated hydrocarbons.
Hazardous Polymerization:
Hazardous Polymerization May No
Occur:
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
No data available.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
No data available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of recovered nonusable product in a manner approved for this material.
Discarded material is not a RCRA hazardous waste. Before attempting clean up,
refer to other sections of the MSDS and dispose of product in accordance with
local, state, and federal regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
Transportation Information:
Shipping Information (CFR and
IMDG):
Proper Shipping Name: Glycols, poly
DOT Hazard Class: None Required
DOT UN Number: None required.
IMDG Shipping Name: Brake Fluid, Hydraulic (Flashpoint GT250F)
Label Information:
No data available.
**** SECTION 15 - REGULATORY INFORMATION ****
SARA Title III: None
Section 302: None
Section 304:
Section 311:
Hazard Immediate Acute Health = Yes
categories Delayed Chronic Health = Yes
Section 313: None
CERCLA:
Section Requires discharges of crude oil and petroleum products in
311(b)(4): any kind or form to waters must immediately be reported to
the National Response Center at (800) 424-8802.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Disclaimer: Information presented herein is believed to be factual, as it has
been derived from the works and opinions of persons believed to be qualified
experts. However, nothing contained in this information is to be taken as
warranty or representation for which the Gold Eagle Co. bears legal
responsibility. The user should review any recommendations in the specific
context of the intended use to determine whether they are appropriate.
Prepared by: Mike Profetto
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
