Start an Order |
|
|
|
| Start an Order |
|||
| Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 396-1 -- [Back] | |||
|
MSDS 396-1 396-1: Bio-Chemical Kit [1]MSDS Last updated: 01/26/2010
MATERIAL SAFETY DATA SHEET
SECTION 1- CHEMCIAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: BIO PENETRANT
IDENTIFICATION NUMBER: 6626 & 6626-1
PRODUCT USE/CLASS: PENETRANT
DATE PRINTED: 11/20/08
MANUFACTURED FOR:
IMPERIAL SUPPLIES LLC
789 ARMED FORCES DR.
GREEN BAY, WI 54307-1008
EMERGENCY TELEPHONE: 1-800-255-3924 (24 HOURS)
EMERGENCY AGENCY: CHEM-TEL
PREPARER: CUSTOMER SERVICE, PHONE:,
PREPARE DATE: 11/20/08
SECTION 2- COMPOSITION/INFORMATION ON INGREDIENTS
ITEM CHEMICAL NAME CAS NUMBER WT/WT% LESS THAN
01 ISOPROPYL ALCOHOL 67-63-0 95.0%
02 CARBON DIOXIDE 124-38-9 10.0%
EXPOSURE LIMITS
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILI TLV-TWA SKIN
NG
01 400 PPM 500 PPM 400 PPM N.E. N.E. NO
02 5000 PPM 30000 PPM 5000 PPM N.E. N.E. YES
(See Section 16 for abbreviation legend)
SECTION 3- HAZARDS IDENTIFICATION
***EMERGENCY OVERVIEW***: Vapors irritating to eyes and
respiratory tract. Vapors may
cause flash fire or explosion.
EFFECTS OF OVEREPOSURE-EYE CONTACT: Liquid, aerosols and vapors of
this product are irritating and
can cause pain, tearing, reddening
and swelling accompanied by a
stinging sensation and/or a
feeling like that of fine dust in
the eyes.
EFFECTS OF OVEREXPOSURE-SKIN Prolonged or repeated contact can
CONTACT: result in defatting and drying of
the skin which may result in skin
irritation and dermatitis (rash).
EFFECTS OF OVEREXPOSURE-INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes
in heart rate and cyanosis may
result from over-exposure to vapor
or skin exposure. Prolonged
inhalation may be harmful.
EFFECTS OF OVEREXPOSURE-INGESTION: This material may be harmful or
fatal if swallowed. If a Corrosive
product, may cause severe and
permanent damage to mouth, throat
and stomach.
EFFECTS OF OVEREXPOSURE- CHRONIC Overexposure may cause nervous
HAZARDS: system damage. Overexposure may
cause lung damage. Overexposure
may cause kidney damage. May cause
liver disorder (e.g., edema,
proteinuria) and damage.
PRIMARY ROUTE(S) OF ENTRY: INHALATION
SECTION 4- FIRST AID MEASURES
FIRST AID-EYE CONTACT: Immediately flush eyes with plenty
of water. Get medical attention,
if irritation persists.
FIRST AID-SKIN CONTACT: Wash with soap and water. Get
medical attention if irritation
develops or persists.
FIRST AID-INHALATION: Remove to fresh air. If not
breathing, give artificial
respiration. If breathing is
difficult, give oxygen. Get
immediate medical attention.
FIRST AID-INGESTION: Get medical attention immediately.
If swallowed, do NOT induce
vomiting. Give victim a glass of
water or milk. Call a physician or
poison control center immediately.
Never give anything by mouth to an
unconscious person.
SECTION 5- FIRE FIGHTING MEASRES
FLASH POINT: 53F
LOWER EXPLOSIVE LIMIT: 2.0%
UPPER EXPLOSIVE LIMIT: 12.0%
AUTOIGNITION TEMPERATURE: ND
EXTINGUISHING MEDIA: ALCOHOL FOAM CO2 DRY CHEMICAL
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors can travel to a source of
ignition and flash back. "Empty"
containers retain product residue
(liquid and/or vapor) and can be
dangerous. DO NOT PRESSURIZE,CUT,
WELD, BRAZE, SOLDER, DRILL, GRIND,
OR EXPOSE SUCH CONTAINERS TO HAT,
FLAME, SPARKS, STATIC
ELECTRICITY,OR OTHER SOURCES OF
IGNITION; THEY MAY EXPLODE AND
CAUSE INJURY OR DEATH. Empty drums
should be completely drained,
properly bunged and promptly
returned to a drum reconditioner,
or properly disposed of.
SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure
if exposed to heat (fire). As in
any fire, wear self-contained
breathing apparatus
pressure-demand (MSHA/NIOSH
approved or equivalent) and full
protective gear.
SECTION 6-ACCIDENTAL RELEASE
MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL Absorb spill with inert material
IS RELEASED OR SPILLED: (e.g. dry sand or earth), then
place in a chemical waste
container.
SECTION 7-HANDLING AND STORAGE
HANDLING: Wash thoroughly after handling.
STORAGE: Keep away from heat, sparks and
flame. Keep from freezing.
SECTION 8- EXPOSRUE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Local exhaust ventilation may be
necessary to control any air
contaminants to within there TLVs
during the use of this product.
RESPIRATORY PROTECTION: A NIOSH/MSHA approved air
purifying respirator with an
organic vapor cartridge or
canister may be permissible under
certain circumstances where
airborne concentrations are
expected to exceed exposure
limits. Protection provided by air
purifying respirators is limited.
Use a positive pressure air
supplied respirator if there is
any potential for an uncontrolled
release, exposure levels are not
known or any other circumstances
where air purifying respirators
may not provide adequate
protection.
SKIN PROTECTION: Where contact is likely, wear
chemical resistant gloves, a
chemical suit, rubber boots, and
chemical safety goggles plus a
face shield.
EYE PROTECTION: Wear safety glasses with side
shields (or goggles) and a face
shield.
OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING
STANDARDS SHOULD BE FOLLOWED.
HYGIENIC PRACTICES: Wash hands before eating. Remove
contaminated clothing and wash
before reuse. Use only in a well
ventilated area. Follow all
MSDS/label precautions even after
container is emptied because they
may retain product residues. Avoid
prolonged or repeated contact with
skin. Avoid breathing vapors from
heated material. Avoid contact
with eyes, skin and clothing.
SECTION 9- PHYSICAL AND CHEMICAL PROPERTIES
BOILING RANGE: 180-181 F
ODOR: ALCOHOL
APPEARNACE: CLEAR YELLOW
SOLUBILITY IN H2O: NEGLIGIBLE
FREZE POINT: ND
VAPOR PRESSURE: ND
PHYSICAL STATE: AEROSOL
VAPOR DENSITY: Is heavier than air
ODOR THRESHOLD: ND
EVAPORATION RATE: Is faster than Butyl Acetate
SPECIFIC GRAVITY: 0.8835
pH @ 0.0% NA
VISCOSITY: ND
COEFFICIENT OF WATER/OIL ND
DISTRIBUTION:
VOLATILE ORGANIC COMPOUNDS (VOCS): 6.24 lbs/gal, 748 grams/ltr
(See Section 16 for abbreviation
legend)
SECTION 10-STABILITY AND REACTIVITY
CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING
ARCS, AND OPEN FLAMES.
INCOMATABILITY: STRONG ACIDS, ALKALIS, OXIDIZERS,
AND AMINES.
HAZARDOUS DECOMPOSITON PRODUCTS: OXIDES OF CARBON, OXIDES OF
NITROGEN, AND MAY PRODUCTE FORMS
OF CHLORIDE, CHLORINE, AND
PHOSGENE.
HAZARDOUS POLYMERIZATION: Will not occur under normal
conditions.
STABILITY: This product is stable under
normal storage conditions.
SECTON 11- TOXICOLOGICAL PROPERTIES
PRODUCT LD50: 5045 mg/kg
PRODUCT LC50: 72600 ppm
COMPONENT TOXICOLOGICAL INFORMATION:
CHEMICAL NAME LD50 LC50
ISOPROPYL ALCOHOL 5045 MG/KG/RAT 72600 MG/M3/RAT
CARBON DIOXIDE NE NE
SECTION 12- ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information.
SECTION 13- DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL
FEDERAL, STATE, AND LOCAL
REGULATIONS.
SECTION 14- TRANSPORATION
INFORMATION
DOT PROPER SHIPPING NAME: AEROSOL-CONSUMER COMMODITY
DOT TECHNICAL NAME: ORM-D
DOT HAZARD CLASS: 2.2
HAZARD SUBCLASS: na
DOT UN/NA NUMBER: UN1950
PACKING GROUP: NA
RESP. GUIDE PAGE: 126
SECTION 15- REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS
FOLLOWS-
OSHA: Hazardous by definition of Hazard
Communication Standard (29 CFR
1910.1200)
CERCLA-SARA HAZARD CATEGORY: This product has been reviewed
according to the EPA 'Hazard
Categories' promulgated under
Sections 311 and 312 of the
Superfund Amendment and
Reauthorization Act of 1986 (SARA
Title III) and is considered,
under applicable definitions, to
meet the following categories:
IMMEDIATE HEALTH CHRONIC HEALTH FIRE HAZARD PRESSURIZED GAS
HAZARD HAZARD HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
CHEMICAL NAME CAS NUMBER WT/WT% IS LESS THAN
NO SARA Section 313 comp9onetns exist in this product.
TOXIC SUBSTANCES CONTRL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12 (B) if exported from the United
States:
CHEMICAL NAME CAS NUMBER
No information is available.
U.S. STATE REGULATIONS: AS FOLLOWS-
NEW JERSEY RIGHT-TO-KNOW: The following materials are
non-hazardous, but are amount the
top five components in this
product:
CHEMICAL NAME CAS NUMBER
No non-hazardous materials are among the top five ingredients.
PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous
ingredients are present in the
product at greater than 3%.
CHEMICAL NAME CAS NUMBER
No non-hazardous ingredients are present at greater than 3%.
CALIFORNIA PROPOSIITON 65:
WARNING: The chemical(s) noted below and
contained in this product, are
known to the state of California
to cause cancer, birth defects or
other reproductive harm.
CHEMICAL NAME CAS NUMBER
No Proposition 65 chemicals exist in this product.
INTERNATIONAL REGULATIONS AS FOLLOWS-
CANADIAN WHMIS: This MSDS has been prepared in
compliance with Controlled Product
Regulations except for use of the
16 headings.
CANADIAN WHMIS CLASS: No information available.
SECTION 16- OTHER INFORMATION
HMIS RATINGS- HEALTH: FLAMMABILITY: REACTIVITY:
PREVIOUS MSDS REVISION DATE: 10/17/08
REASON FOR REVISION: PRODUCT SAMPLE
LEGEND:
N.A.- Not Applicable
N.E.- Not Established,
N.D.- Not Determined
***THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION***
The information contained on this MSDS has been check and should be
accurate. However, it is the responsibility of the user to comply with
all Federal, State, and Local laws and regulations.
<END OF MSDS>
The information contained in this MSDS was obtained from current and
reliable sources; however, the data is provided without any warranty,
expressed or implied, regarding its correctness or accuracy. Since the
conditions or handling, storage and disposal of this product are beyond
the control of Imperial Supplies LLC, Imperial will not be responsible
for loss, injury, or expense arising out of the products improper use.
No warranty, expressed or inferred regarding the product described in
this MSDS shall be created or inferred by any statement in this MSDS.
Various government agencies may have specific regulations regarding the
transportation, handling, storage, use or disposal of this product which
may not be covered by this MSDS. The user is responsible for full
compliance.
MATERIAL SAFETY DATA SHEET
SECTION 1- CHEMCIAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: EP 2 GREASE
IDENTIFICATION NUMBER: 6625 & 6625-1
PRODUCT USE/CLASS: MULTI-PURPOSE LUBRICANT
DATE PRINTED: 11/20/08
MANUFACTURED FOR:
IMPERIAL SUPPLIES LLC
789 ARMED FORCES DR.
GREEN BAY, WI 54307-1008
EMERGENCY TELEPHONE: 1-800-255-3924 (24 HOURS)
EMERGENCY AGENCY: CHEM-TEL
PREPARER: CUSTOMER SERVICE, PHONE:,
PREPARE DATE: 11/20/08
SECTION 2- COMPOSITION/INFORMATION ON INGREDIENTS
ITEM CHEMICAL NAME CAS NUMBER WT/WT & LESS THAN
01 ETHANOL-A2 64-17-5 35.0%
02 PROPANE/ISOBUTANE/N- 68476-86-8 35.0%
BUTANE
03 METHYL ALCOHOL 67-56-1 5.0%
EXPOSURE LIMITS
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILI TLV-TWA SKIN
NG
01 200 PPM 250 PPM 200 PPM N.E. N.E. NO
SKIN SKIN
02 1000 PPM N.E. 800 PPM N.E. N.E. YES
03 200 PPM 250 PPM 200 PPM N.E. N.E. NO
SKIN SKIN SKIN
(See Section 16 for abbreviation legend)
***EMERGENCY OVERVIEW***: Vapors irritating to eyes and
respiratory tract. Vapors may cause
flash fire or explosion.
EFFECTS OF OVEREPOSURE-EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can
cause pain, tearing, reddening and
swelling accompanied by a stinging
sensation and/or a feeling like
that of fine dust in the eyes.
EFFECTS OF OVEREXPOSURE-SKIN Prolonged or repeated contact can
CONTACT: result in defatting and drying of
the skin which may result in skin
irritation and dermatitis (rash).
EFFECTS OF OVEREXPOSURE-INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes
in heart rate and cyanosis may
result from over-exposure to vapor
or skin exposure. Prolonged
inhalation may be harmful.
EFFECTS OF OVEREXPOSURE-INGESTION: This material may be harmful or
fatal if swallowed. If a Corrosive
product, may cause severe and
permanent damage to mouth, throat
and stomach.
EFFECTS OF OVEREXPOSURE- CHRONIC Overexposure may cause nervous
HAZARDS: system damage. Overexposure may
cause lung damage. Overexposure may
cause kidney damage. May cause
liver disorder (e.g., edema,
proteinuria) and damage.
PRIMARY ROUTE(S) OF ENTRY:
SKIN CONTACT SKIN INHALATION INGESTION EYE CONTACT
ABSORPTION
SECTION 4- FIRST AID MEASURES
FIRST AID-EYE CONTACT: Immediately flush eyes with plenty
of water. Get medical attention,
if irritation persists.
FIRST AID-SKIN CONTACT: Wash with soap and water. Get
medical attention if irritation
develops or persists.
FIRST AID-INHALATION: Remove to fresh air. If not
breathing, give artificial
respiration. If breathing is
difficult, give oxygen. Get
immediate medical attention.
FIRST AID-INGESTION: Get medical attention immediately.
If swallowed, do NOT induce
vomiting. Give victim a glass of
water or milk. Call a physician or
poison control center immediately.
Never give anything by mouth to an
unconscious person.
SECTION 5- FIRE FIGHTING MEASURES
FLASH POINT: -156F
LOWER EXPLOSIVE LIMIT: 1.8%
UPPER EXPLOSIVE LIMIT: 36.0%
AUTOIGNITION TEMPERATURE: ND
EXTINGUISHING MEDIA: ALCOHOL FOAM CO2 DRY CHEMICAL
FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors can travel to a source of
ignition and flash back. "Empty"
containers retain product residue
(liquid and/or vapor) and can be
dangerous. DO NOT PRESSURIZE,CUT,
WELD, BRAZE, SOLDER, DRILL, GRIND,
OR EXPOSE SUCH CONTAINERS TO HAT,
FLAME, SPARKS, STATIC
ELECTRICITY,OR OTHER SOURCES OF
IGNITION; THEY MAY EXPLODE AND
CAUSE INJURY OR DEATH. Empty drums
should be completely drained,
properly bunged and promptly
returned to a drum reconditioner,
or properly disposed of.
SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure
if exposed to heat (fire). As in
any fire, wear self-contained
breathing apparatus
pressure-demand (MSHA/NIOSH
approved or equivalent) and full
protective gear.
6-ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL Absorb spill with inert material
IS RELEASED OR SPILLED: (e.g. dry sand or earth), then
place in a chemical waste
container.
SECTION 7- HANDLING AND STORAGE
HANDLING: Wash thoroughly after handling.
STORAGE: Keep away from heat, sparks and
flame. Keep from freezing.
SECTION 8-OVEREXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Local exhaust ventilation may be
necessary to control any air
contaminants to within there TLVs
during the use of this product.
RESPIRATORY PROTECTION: A NIOSH/MSHA approved air
purifying respirator with an
organic vapor cartridge or
canister may be permissible under
certain circumstances where
airborne concentrations are
expected to exceed exposure
limits. Protection provided by air
purifying respirators is limited.
Use a positive pressure air
supplied respirator if there is
any potential for an uncontrolled
release, exposure levels are not
known or any other circumstances
where air purifying respirators
may not provide adequate
protection.
SKIN PROTECTION: Where contact is likely, wear
chemical resistant gloves, a
chemical suit, rubber boots, and
chemical safety goggles plus a
face shield.
EYE PROTECTION: Wear safety glasses with side
shields (or goggles) and a face
shield.
OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING
STANDARDS SHOULD BE FOLLOWED.
HYGIENIC PRACTICES: Wash hands before eating. Remove
contaminated clothing and wash
before reuse. Use only in a well
ventilated area. Follow all
MSDS/label precautions even after
container is emptied because they
may retain product residues. Avoid
prolonged or repeated contact with
skin. Avoid breathing vapors from
heated material. Avoid contact
with eyes, skin and clothing.
SECTION 9-PHYSICAL AND CHEMICAL PROPERTIES
BOILING RANGE: -43-237F
ODOR: SOLVENT
APPEARNACE: AMBER
SOLUBILITY IN H2O: INSOLUBLE
FREZE POINT: ND
VAPOR PRESSURE: ND
PHYSICAL STATE: AEROSOL
VAPOR DENSITY: Is heavier than air
ODOR THRESHOLD: ND
EVAPORATION RATE: Is faster than Butyl Acetate
SPECIFIC GRAVITY: 0.7696
pH @ 0.0% NA
VISCOSITY: ND
COEFFICIENT OF WATER/OIL ND
DISTRIBUTION:
VOLATILE ORGANIC COMPOUNDS (VOCS): 4.04 lbs/gal, 484 grams/ltr
(See Section 16 for abbreviation
legend)
SECTION 10- STABILITY AND
REACTIVITY
CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING
ARCS, AND OPEN FLAMES.
INCOMATABILITY: STRONG ACIDS, ALKALIS, OXIDIZERS,
AND AMINES.
HAZARDOUS DECOMPOSITON PRODUCTS: OXIDES OF CARBON, OXIDES OF
NITROGEN, AND MAY PRODUCTE FORMS OF
CHLORIDE, CHLORINE, AND PHOSGENE.
HAZARDOUS POLYMERIZATION: Will not occur under normal
conditions.
STABILITY: This product is stable under normal
storage conditions.
SECTION 11- TOXICOLOGICAL
INFORMATION
PRODUCT LD50: 5628 mg/kg
PRODUCT LC50: 39000 ppm
COMPONENT TOXICOLOGICAL INFORMATION
CHEMICAL NAME LD50 LC50
ETHANOL-A2 9000 MG/KG/RAT 39000 MG/M3/4H/MSE
METHYL ESTER, SOYBEAN N.E. N.E.
OIL
PROPANE/ISOBUTANE/N-BUT NE 658000 MG/M3/$HRAT
ANE
METHYL ALCOHOL 5628 MG/KG/RAT 86000 MG/M3/HUMAN
HEXANONE 2080 MG/KG/RAT 100000 MG/M3/RAT
SECTION 12- ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information.
SECTION 13- DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL
FEDERAL, STATE, AND LOCAL
REGULATIONS.
SECTION 14- TRANSPORATION
INFORMATION
DOT PROPER SHIPPING NAME: AEROSOL-CONSUMER COMMODITY
DOT TECHNICAL NAME: ORM-D
DOT HAZARD CLASS: 2.1
HAZARD SUBCLASS: NA
DOT UN/NA NUMBER: UN1950
PACKING GROUP: NA
RESP. GUIDE PAGE: 126
SECTION 15-REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS
FOLLOWS-
OSHA: Hazardous by definition of Hazard
Communication Standard (29 CFR
1910.1200)
CERCLA-SARA HAZARD CATEGORY: This product has been reviewed
according to the EPA 'Hazard
Categories' promulgated under
Sections 311 and 312 of the
Superfund Amendment and
Reauthorization Act of 1986 (SARA
Title III) and is considered, under
applicable definitions, to meet the
following categories:
IMMEDIATE HEALTH CHRONIC HEALTH FIRE HAZARD PRESSURIZED GAS
HAZARD HAZARD HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
CHEMICAL NAME CAS NUMBER WT/WT% IS LESS THAN
METHYL ALCOHOL 67-56-1 5.0%
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12 (B) if exported from the United
States:
CHEMICAL NAME CAS NUMBER
ETHANOL-A2 64-17-5
METHYL ALCOHOL 67-56-1
HEXANONE 108-10-1
U.S. STATE REGULATIONS: AS FOLLOWS-
NEW JERSEY RIGHT-TO-KNOW: The following materials are
non-hazardous, but are amount the
top five components in this
product:
CHEMICAL NAME CAS NUMBER
METHYL ESTER, SOYBEAN OIL 67784-80-9
PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous
ingredients are present in the
product at greater than 3%.
CHEMICAL NAME CAS NUMBER
METHYL ESTER, SOYBEAN OIL 67784-80-9
CALIFORNIA PROPOSIITON 65:
WARNING: The chemical(s) noted below and
contained in this product, are
known to the state of California
to cause cancer, birth defects or
other reproductive harm.
CHEMICAL NAME CAS NUMBER
No Proposition 65 chemicals exist in this product.
INTERNATIONAL REGUALTIONS: AS FOLLOWS-
CANADIAN WHMIS: This MSDS has been prepared in
compliance with Controlled Product
Regulations except for use of the
16 headings.
CANADIAN WHMIS CLASS: No information available.
SECTION 16- OTHER INFORMATION
HMIS RATINGS- HEALTH: 1 FLAMMABILITY: 4 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 11/18/08
REASON FOR REVISION: NEW FORMULA
LEGEND:
N.A.- Not Applicable,
N.E.- Not Established,
N.D.- Not Determined
***THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION***
The information contained on this MSDS has been check and should be
accurate. However, it is the responsibility of the user to comply with
all Federal, State, and Local laws and regulations.
<END OF MSDS>
The information contained in this MSDS was obtained from current and
reliable sources; however, the data is provided without any warranty,
expressed or implied, regarding its correctness or accuracy. Since the
conditions or handling, storage and disposal of this product are beyond
the control of Imperial Supplies LLC, Imperial will not be responsible
for loss, injury, or expense arising out of the products improper use.
No warranty, expressed or inferred regarding the product described in
this MSDS shall be created or inferred by any statement in this MSDS.
Various government agencies may have specific regulations regarding the
transportation, handling, storage, use or disposal of this product which
may not be covered by this MSDS. The user is responsible for full
compliance.
MATERIAL SAFETY DATA SHEET
SECTION 1- CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: FBL7900046 CHAIN AND CABLE
IDENTIFICATION NUMBER: 6624 & 6624-1
PRODUCT USE/CLASS: BIO CHAIN & CABLE
DATE PRINTED: 11/20/08
MANUFACTURED FOR:
IMPERIAL SUPPLIES LLC
789 ARMED FORCES DR.
GREEN BAY, WI 54307-1008
EMERGENCY TELEPHONE: 1-800-255-3924 (24 HOURS)
EMERGENCY AGENCY: CHEM-TEL
PREPARER: CUSTOMER SERVICE, PHONE:,
PREPARE DATE: 11/20/08
SECTION 2- COMPOSITION/INFORMATION ON INGREDIENTS
ITEM CHEMICAL NAME CAS NUMBER WT/WT % LESS THAN
01 NITROGEN 7727-37-9 100.0%
EXPOSURE LIMITS
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILI TLV-TWA SKIN
NG
01 N.E. N.E. N.E. N.E. N.E. YES
(See Section 16 for abbreviation legend)
SECTION 3-HAZARDS IDENTIFICATION
***EMERGENCY OVERVIEW***: Vapors irritating to eyes and
respiratory tract. High vapor
concentrations may cause
drowsiness.
EFFECTS OF OVEREPOSURE-EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can
cause pain, tearing, reddening and
swelling accompanied by a stinging
sensation and/or a feeling like
that of fine dust in the eyes.
EFFECTS OF OVEREXPOSURE-SKIN Prolonged or repeated contact can
CONTACT: result in defatting and drying of
the skin which may result in skin
irritation and dermatitis (rash).
EFFECTS OF OVEREXPOSURE-INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes
in heart rate and cyanosis may
result from over-exposure to vapor
or skin exposure. Prolonged
inhalation may be harmful.
EFFECTS OF OVEREXPOSURE-INGESTION: This material may be harmful or
fatal if swallowed.
EFFECTS OF OVEREXPOSURE- CHRONIC Overexposure may cause nervous
HAZARDS: system damage.
PRIMARY ROUTE(S) OF ENTRY: INHALATION
SECTION 4- FIRST AID MEASURES
FIRST AID-EYE CONTACT: Immediately flush eyes with plenty
of water. Get medical attention, if
irritation persists.
FIRST AID-SKIN CONTACT: Immediately flush skin with plenty
of water. Remove clothing. . Get
medical attention immediately. Wash
clothing separately before reuse.
FIRST AID-INHALATION: Remove to fresh air. If not
breathing, give artificial
respiration. If breathing is
difficult, give oxygen. Get
immediate medical attention.
FIRST AID-INGESTION: Get medical attention immediately.
If swallowed, do NOT induce
vomiting. Give victim a glass of
water or milk. Call a physician or
poison control center immediately.
Never give anything by mouth to an
unconscious person.
SECTION 5- FIRE FIGHTING MEASURES
FLASH POINT: N.A.
LOWER EXPLOSIVE LIMIT: N.A.
UPPER EXPLOSIVE LIMIT: N.A.
AUTOIGNITION TEMPERATURE:
EXTINGUISHING MEDIA: Unknown
UNUSUAL FIRE AND EXPLOSION HAZARDS: "Empty" containers retain product
residue (liquid and/or vapor) and
can be dangerous. DO NOT
PRESSURIZE,CUT, WELD, BRAZE,
SOLDER, DRILL, GRIND, OR EXPOSE
SUCH CONTAINERS TO HAT, FLAME,
SPARKS, STATIC ELECTRICITY,OR OTHER
SOURCES OF IGNITION; THEY MAY
EXPLODE AND CAUSE INJURY OR DEATH.
Empty drums should be completely
drained, properly bunged and
promptly returned to a drum
reconditioner, or properly disposed
of.
SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if
exposed to heat (fire). As in any
fire, wear self-contained breathing
apparatus pressure-demand
(MSHA/NIOSH approved or equivalent)
and full protective gear.
SECTION 6- ACCIDENTAL RELEASE
MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL Absorb spill with inert material
IS RELEASED OR SPILLED: (e.g. dry sand or earth), then
place in a chemical waste
container. Avoid runoff into storm
sewers and ditches which lead to
waterways.
SECTION 7-HANDLING AND STORAGE
HANDLING: Wash thoroughly after handling.
STORAGE: Keep from freezing.
SECTION 8- EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Local exhaust ventilation may be
necessary to control any air
contaminants to within there TLVs
during the use of this product.
RESPIRATORY PROTECTION: A respiratory protection program
that meets OSHA 1910.134 and ANSI
Z88.2 requirements must be followed
whenever workplace conditions
warrant a respirator's use.
SKIN PROTECTION: No Information.
EYE PROTECTION: Wear safety glasses with side
shields (or goggles) and a face
shield.
OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING
STANDARDS SHOULD BE FOLLOWED.
HYGIENIC PRACTICES: Wash hands before eating. Remove
contaminated clothing and wash
before reuse. Use only in a well
ventilated area. Follow all
MSDS/label precautions even after
container is emptied because they
may retain product residues. Avoid
prolonged or repeated contact with
skin. Avoid breathing vapors from
heated material. Avoid contact with
eyes, skin and clothing.
SECTION 9- PHYSICAL AND CHEMICAL PROPERTIES
BOILING RANGE: -320 - -320F
ODOR: SOLVENT
APPEARANCE: AMBER
SOLUBILITY IN H2O: Negligible
FREEZE POINT:
VAPOR PRESSURE:
PHYSICAL STATE:
VAPOR DENSITY: Is heavier than air
ODOR THRESHOLD:
EVAPORATION RATE: Is faster than Butyl Acetate
SPECIFIC GRAVITY: 0.9672
pH@ 0.0% :
VISCOSITY:
COEFFICIENT OF WATER/OIL NEGLIGIBLE
DISTRIBUTION:
(See Section 16 for abbreviation
legend)
SECTION 10- STABILITY AND
REACTIVITY
CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING
ARCS, AND OPEN FLAMES.
INCOMATABILITY: STRONG ACIDS, ALKALIS, OXIDIZERS,
AND AMINES.
HAZARDOUS DECOMPOSITON PRODUCTS: OXIDES OF CARBON, OXIDES OF
NITROGEN, AND MAY PRODUCTE FORMS OF
CHLORIDE, CHLORINE, AND PHOSGENE.
HAZARDOUS POLYMERIZATION: Will not occur under normal
conditions.
STABILITY: This product is stable under normal
storage conditions.
SECTON 11- TOXICOLOGICAL PROPERTIES
No product or component toxicological information is available.
SECTION 12- ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information.
SECTION 13- DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL
FEDERAL, STATE, AND LOCAL
REGULATIONS.
SECTOIN 14- TRANSPORTATION
INFORMATION
DOT PROPER SHIPPING NAME: AEROSOL-CONSUMER COMMODITY
DOT TECHNICAL NAME: ORM-D
DOT HAZARD CLASS:
HAZARD SUBCLASS:
DOT UN/NA NUMBER:
PACKING GROUP:
RESP. GUIDE PAGE:
SECTION 15- REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS
FOLLOWS-
OSHA: Hazardous by definition of Hazard
Communication Standard (29 CFR
1910.1200)
CERCLA-SARA HAZARD CATEGORY: This product has been reviewed
according to the EPA 'Hazard
Categories' promulgated under
Sections 311 and 312 of the
Superfund Amendment and
Reauthorization Act of 1986 (SARA
Title III) and is considered, under
applicable definitions, to meet the
following categories:
PRESSURIZED GAS HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
CHEMICAL NAME CAS NUMBER WT/WT % IS LESS THAN
No SARA Section 313 components exist in this product.
TOXIC SUBSTANCE CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12 (B) if exported from the United
States:
CHEMICAL NAME CAS NUMBER
No information is available.
U.S. STATE REGULATIONS: AS FOLLOWS-
NEW JERSEY RIGHT-TO-KNOW: The following materials are
non-hazardous, but are amount the
top five components in this
product:
CHEMICAL NAME CAS NUMBER
No non-hazardous materials are among the top five ingredients.
PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous
ingredients are present in the
product at greater than 3%.
CHEMICAL NAME CAS NUMBER
No non-hazardous ingredients are present at greater than 3%.
CALIFORNIA PROPOSIITON 65:
WARNING: The chemical(s) noted below and
contained in this product, are
known to the state of California to
cause cancer, birth defects or
other reproductive harm.
CHEMICAL NAME CAS NUMBER
No Proposition 65 chemicals exist in this product.
INTERNATIONAL REGULATIONS AS
FOLLOWS-
CANADIAN WHMIS: This MSDS has been prepared in
compliance with Controlled Product
Regulations except for use of the
16 headings.
CANADIAN WHMIS CLASS: No information available.
SECTION 16-OTHER INFORMATION
HMIS RATINGS- HEALTH: FLAMMABILITY: REACTIVITY:
PREVIOUS MSDS REVISION DATE: 11/20/08
REASON FOR REVISION: NEW FORMAT
LEGEND:
N.A.- Not Applicable,
N.E.- Not Established,
N.D.- Not Determined
***THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION***
The information contained on this MSDS has been check and should be
accurate. However, it is the responsibility of the user to comply with
all Federal, State, and Local laws and regulations.
<END OF MSDS>
The information contained in this MSDS was obtained from current and
reliable sources; however, the data is provided without any warranty,
expressed or implied, regarding its correctness or accuracy. Since the
conditions or handling, storage and disposal of this product are beyond
the control of Imperial Supplies LLC, Imperial will not be responsible
for loss, injury, or expense arising out of the products improper use.
No warranty, expressed or inferred regarding the product described in
this MSDS shall be created or inferred by any statement in this MSDS.
Various government agencies may have specific regulations regarding the
transportation, handling, storage, use or disposal of this product which
may not be covered by this MSDS. The user is responsible for full
compliance.
MATERIAL SAFETY DATA SHEET
SECTION 1- CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: BRAKE CLEANER
IDENTIFICATION NUMBER: 6623 & 6623-1
PRODUCT USE/CLASS: BRAKE CLEANER
DATE PRINTED: 11/20/08
MANUFACTURED FOR:
IMPERIAL SUPPLIES LLC
789 ARMED FORCES DR.
GREEN BAY, WI 54307-1008
EMERGENCY TELEPHONE: 1-800-255-3924 (24 HOURS)
EMERGENCY AGENCY: CHEM-TEL
PREPARER: CUSTOMER SERVICE, PHONE:,
PREPARE DATE: 11/20/08
SECTION 2- COMPOSITION/INFORMATION ON INGREDIENTS
ITEM CHEMICAL NAME CAS NUMBER WT/WT % LESS THAN
01 METHYL ACETATE 79-20-9 75.0%
02 ETHYL ACETIC 141-78-6 20.0%
ESTER
03 CARBON DIOXIDE 124-38-9 10.0%
EXPOSURE LIMITS
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILI TLV-TWA SKIN
NG
01 200 PPM 250 PPM 200 PPM N.E. N.E. NO
02 400 PPM N.E. 400 PPM N.E. N.E. NO
03 5000 PPM 30000PPM 5000PPM N.E. N.E. YES
(See Section 16 for abbreviation legend)
SECTION 3- HAZARDS IDENTIFICATION
***EMERGENCY OVERVIEW***: Vapors irritating to eyes and
respiratory tract. Vapors may cause
flash fire or explosion.
EFFECTS OF OVEREPOSURE-EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can
cause pain, tearing, reddening and
swelling accompanied by a stinging
sensation and/or a feeling like
that of fine dust in the eyes.
EFFECTS OF OVEREXPOSURE-SKIN Prolonged or repeated contact can
CONTACT: result in defatting and drying of
the skin which may result in skin
irritation and dermatitis (rash).
EFFECTS OF OVEREXPOSURE-INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes
in heart rate and cyanosis may
result from over-exposure to vapor
or skin exposure. Prolonged
inhalation may be harmful.
EFFECTS OF OVEREXPOSURE-INGESTION: This material may be harmful or
fatal if swallowed. If a Corrosive
product, may cause severe and
permanent damage to mouth, throat
and stomach.
EFFECTS OF OVEREXPOSURE- CHRONIC Overexposure may cause nervous
HAZARDS: system damage. Overexposure may
cause lung damage. Overexposure may
cause kidney damage. May cause
liver disorder (e.g., edema,
proteinuria) and damage.
PRIMARY ROUTE(S) OF ENTRY:
SKIN CONTACT INHALATION INGESTION EYE CONTACT
SECTION 4- FIRST AID MEASURES
FIRST AID-EYE CONTACT: Immediately flush eyes with plenty
of water. Get medical attention, if
irritation persists.
FIRST AID-SKIN CONTACT: Wash with soap and water. Get
medical attention if irritation
develops or persists.
FIRST AID-INHALATION: Remove to fresh air. If not
breathing, give artificial
respiration. If breathing is
difficult, give oxygen. Get
immediate medical attention.
FIRST AID-INGESTION: Get medical attention immediately.
If swallowed, do NOT induce
vomiting. Give victim a glass of
water or milk. Call a physician or
poison control center immediately.
Never give anything by mouth to an
unconscious person.
SECTION 5- FIRE FIGHTING MEASURES
FLASHPOINT: 9F
LOWER EXPLOSIVE LIMIT: 2.2%
UPPER EXPLOSIVE LIMIT: 16.0%
AUTOIGNITION TEMPERATURE: ND
EXTINGHUISHING MEDIA: ALCOHOL FOAM CO2 DRY CHEMICAL
WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors can travel to a source of
ignition and flash back. "Empty"
containers retain product residue
(liquid and/or vapor) and can be
dangerous. DO NOT PRESSURIZE,CUT,
WELD, BRAZE, SOLDER, DRILL, GRIND,
OR EXPOSE SUCH CONTAINERS TO HAT,
FLAME, SPARKS, STATIC
ELECTRICITY,OR OTHER SOURCES OF
IGNITION; THEY MAY EXPLODE AND
CAUSE INJURY OR DEATH. Empty drums
should be completely drained,
properly bunged and promptly
returned to a drum reconditioner,
or properly disposed of.
SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if
exposed to heat (fire). As in any
fire, wear self-contained breathing
apparatus pressure-demand
(MSHA/NIOSH approved or equivalent)
and full protective gear.
SECTION 6- ACCIDENTAL RELEASE
MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL Absorb spill with inert material
IS RELEASED OR SPILLED: (e.g. dry sand or earth), then
place in a chemical waste
container.
SECTION 7-HANDLING AND STORAGE
HANDLING: Wash thoroughly after handling.
STORAGE: Keep away from heat, sparks and
flame. Keep from freezing.
SECTION 8-EXPOUSRE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: Local exhaust ventilation may be
necessary to control any air
contaminants to within there TLVs
during the use of this product.
RESPIRATORY PROTECTION: A NIOSH/MSHA approved air purifying
respirator with an organic vapor
cartridge or canister may be
permissible under certain
circumstances where airborne
concentrations are expected to
exceed exposure limits. Protection
provided by air purifying
respirators is limited. Use a
positive pressure air supplied
respirator if there is any
potential for an uncontrolled
release, exposure levels are not
known or any other circumstances
where air purifying respirators may
not provide adequate protection.
SKIN PROTECTION: Where contact is likely, wear
chemical resistant gloves, a
chemical suit, rubber boots, and
chemical safety goggles plus a face
shield.
EYE PROTECTION: Wear safety glasses with side
shields (or goggles) and a face
shield.
OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING
STANDARDS SHOULD BE FOLLOWED.
HYGIENIC PRACTICES: Wash hands before eating. Remove
contaminated clothing and wash
before reuse. Use only in a well
ventilated area. Follow all
MSDS/label precautions even after
container is emptied because they
may retain product residues. Avoid
prolonged or repeated contact with
skin. Avoid breathing vapors from
heated material. Avoid contact with
eyes, skin and clothing.
SECTION 9- PHYSICAL AND CHEMICAL PROPERTIES
BOILING RANGE: 132-172F
ODOR: SOLVENT
APPEARNACE: CLEAR
SOLUBILITY IN H2O: NEGLIGIBLE
FREZE POINT: ND
VAPOR PRESSURE: ND
PHYSICAL STATE: AEROSOL
VAPOR DENSITY: Is heavier than air
ODOR THRESHOLD: ND
EVAPORATION RATE: Is faster than Butyl Acetate
SPECIFIC GRAVITY: 0.9573
pH @ 0.0% NA
VISCOSITY: ND
COEFFICIENT OF WATER/OIL ND
DISTRIBUTION:
VOLATILE ORGANIC COMPOUNDS (VOCS): 1.47 lbs/gal, 176 grams/ltr
(See Section 16 for abbreviation
legend)
SECTION 10-STABILITY AND REACTIVITY
CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING
ARCS, AND OPEN FLAMES.
INCOMATABILITY: STRONG ACIDS, ALKALIS, OXIDIZERS,
AND AMINES.
HAZARDOUS DECOMPOSITON PRODUCTS: OXIDES OF CARBON, OXIDES OF
NITROGEN, AND MAY PRODUCTE FORMS OF
CHLORIDE, CHLORINE, AND PHOSGENE.
HAZARDOUS POLYMERIZATION: Will not occur under normal
conditions.
STABILITY: This product is stable under normal
storage conditions.
SECTON 11- TOXICOLOGICAL PROPERTIES
PRODUCT LD50: 5620 mg/kg
PRODUCT LD50: 16000 ppm
COMPONENT TOXICOLOGICAL
INFORMATION:
CHEMICAL NAME LD50 LC50
METHYL ACETATE 6970 MG/KG/RAT >16000 PPM/4H/RAT
ETHYL ACETIC ESTER 5620 MG/KG/RAT >200000 MG/M3/RAT
CARBON DIOXIDE NE NE
SECTION 12- ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information.
SECTION 13- DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL
FEDERAL, STATE, AND LOCAL
REGULATIONS.
SECTION 14- TRANSPORATION
INFORMATION
DOT PROPER SHIPPING NAME: AEROSOL-CONSUMER COMMODITY
DOT TECHNICAL NAME: ORM-D
DOT HAZARD CLASS: 2.2
HAZARD SUBCLASS: na
DOT UN/NA NUMBER: UN1950
PACKING GROUP: NA
RESP. GUIDE PAGE: 126
SECTION 15- REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS
FOLLOWS-
OSHA: Hazardous by definition of Hazard
Communication Standard (29 CFR
1910.1200)
CERCLA-SARA HAZARD CATEGORY: This product has been reviewed
according to the EPA 'Hazard
Categories' promulgated under
Sections 311 and 312 of the
Superfund Amendment and
Reauthorization Act of 1986 (SARA
Title III) and is considered, under
applicable definitions, to meet the
following categories:
IMMEDIATE HEALTH CHRONIC HEALTH FIRE HAZARD PRESSURIZED GAS
HAZARD HAZARD HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
CHEMICAL NAME CAS NUMBER WT/WT% IS LESS THAN
NO SARA Section 313 components exist in this product.
TOXIC SUBSTANCES CONTRL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12 (B) if exported from the United
States:
CHEMICAL NAME CAS NUMBER
No information is available.
U.S. STATE REGULATIONS: AS FOLLOWS-
NEW JERSEY RIGHT-TO-KNOW: The following materials are
non-hazardous, but are amount the
top five components in this
product:
CHEMICAL NAME CAS NUMBER
No non-hazardous materials are among the top five ingredients.
PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous
ingredients are present in the
product at greater than 3%.
CHEMICAL NAME CAS NUMBER
No non-hazardous ingredients are present at greater than 3%.
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and
contained in this product, are
known to the state of California
to cause cancer, birth defects or
other reproductive harm.
CHEMICAL NAME CAS NUMBER
No Proposition 65 chemicals exist in this product.
INTERNATIONAL REGULATIONS AS FOLLOWS-
CANADIAN WHMIS: This MSDS has been prepared in
compliance with Controlled Product
Regulations except for use of the
16 headings.
CANADIAN WHMIS CLASS: No information available.
SECTION 16- OTHER INFORMATION
HMIS RATINGS- HEALTH:1 FLAMMABILITY:4 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 09/08/08
REASON FOR REVISION: NEW FORMULA
LEGEND:
N.A.- Not Applicable,
N.E.- Not Established,
N.D.- Not Determined
***THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION***
The information contained on this MSDS has been check and should be
accurate. However, it is the responsibility of the user to comply with
all Federal, State, and Local laws and regulations.
<END OF MSDS>
The information contained in this MSDS was obtained from current and
reliable sources; however, the data is provided without any warranty,
expressed or implied, regarding its correctness or accuracy. Since the
conditions or handling, storage and disposal of this product are beyond
the control of Imperial Supplies LLC, Imperial will not be responsible
for loss, injury, or expense arising out of the products improper use.
No warranty, expressed or inferred regarding the product described in
this MSDS shall be created or inferred by any statement in this MSDS.
Various government agencies may have specific regulations regarding the
transportation, handling, storage, use or disposal of this product which
may not be covered by this MSDS. The user is responsible for full
compliance.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States |
